Broyd Posted July 9, 2018 Posted July 9, 2018 (edited) I just upgraded to 5.0.13 and when I web log into the ISY (UD Ajax) all of my Insteon devices show the left and right ‘power’ buttons. But the left button is ALWAYS green no matter what I do. The status does change from 0 to 100 present when I press the gray button that used to be red but that button never lights up red when a device is powered off. Is this a bug? I certainly does not easily visibly reflect the device status as it did in 4. Thanks for checking The Z-Wave devices all work the way they did previously, just Insteon devices are affected. Edited July 9, 2018 by Broyd Added that ZW display is fine. As previously.
Michel Kohanim Posted July 10, 2018 Posted July 10, 2018 Hi Broyd, Thanks so very much for the feedback. We'll definitely look into it. With kind regards, Michel
paulbates Posted July 10, 2018 Posted July 10, 2018 FWIW, HAD pages continue to function properly for Insteon on 5.0.13, accessed both locally or through the portal. Paul 1
Recommended Posts