MikeB Posted June 23, 2009 Share Posted June 23, 2009 UPDATE 10/2: Our second online training and demo has been scheduled for Saturday 10/10 at 8pm Eastern, 5pm Pacific. Target audience is the same as the last meeting - people considering purchasing the ISY and new users looking to get familiar with the ISY. There will be a dial-in # available for audio (long distance charges apply). Date: Saturday October 10, 2009 Time: 8pm Eastern / 5pm Pacific Meeting URL: https://webmeeting.dimdim.com/portal/Jo ... al_devices Optional Dial-In: 702-473-3463 Dial-In Code: 1234 Hope to see you there! _____________________________________________________________ UPDATE: Our first online training/demo is scheduled for this coming Friday (7/3) at 3pm Eastern, 12pm Pacific. I realize that we can't accomodate everyone with a single time/day, so we will vary our day and time for future trainings/demos. There is a dial-in # available for those who want to connect in via phone (long distance charges apply). Otherwise, chat is on-screen or via microphone. Date: Friday July 3rd, 2009 Time: 3pm Eastern / 12pm Pacific Meeting URL: https://webmeeting.dimdim.com:443/porta ... al_devices Optional Dial-In: 712-432-6139 Dial-In Code: 1234 Hope to see you there! ________________________________________________________ Thinking of purchasing an ISY for INSTEON? Already have an ISY but need some help getting started? Universal Devices will be holding an online training & demo for the ISY line of automation & energy conservation controllers. This first session will focus on basic topics. Some topics we'll be covering: - choosing a location for your ISY and PLM - basic setup and configuration of the ISY - using the ISY to manage your Insteon devices, create links/scenes - creating programs on the ISY - using the IR receiver to trigger programs - accessing your ISY over the internet - troubleshooting INSTEON communication issues - ... and more! Information on the ISY is available here: http://www.universal-devices.com/99i.htm The training & demo will run approximately 1-2 hours, depending on # of attendees, questions, etc. We're looking for suggestions on a time and day for the session. We are considering: - weekday evening (9pm EST/6pm PST) - weekend morning (11am EST/8am PST) - weekend evening (9pm EST/6pm PST) Please let us know your thoughts on a time/day, and also any particular topics you'd like to see covered. Feel free to reply to this thread, or email us at demos@universal-devices.com Once we get some feedback, we will announce the time and date for the session and information on signing up. Thanks! Link to comment
bpwwer Posted June 23, 2009 Share Posted June 23, 2009 Great idea! I like to see "...and more!" I think some examples/demos of actual uses would be good. Things like garage door control, irrigation, motion sensors. I know there's a lot of information on these topics in the forum, but interactive sessions where the details can be more easily explained, I think would be helpful. Link to comment
MikeB Posted June 23, 2009 Author Share Posted June 23, 2009 Thanks for the feedback, Bob! I 100% agree, but think we should stick with the basics for the 1st session. Afterwards perhaps we can stagger sessions with different topics. Link to comment
AnthemAVM Posted June 24, 2009 Share Posted June 24, 2009 Mike, I think this would be awesome and make our ISY that much better. Thanks for offering this service. Link to comment
TomW Posted June 26, 2009 Share Posted June 26, 2009 Great idea. Weekday evenings would work best for me. I am just getting starting with my ISY-99i and could use some help with a device naming convention. Also some examples how to get started with setting up a room with a KeypadLinc, a RemoteLinc, and some LampLincs. Looking forward to the online training. /Tom Link to comment
MikeB Posted July 1, 2009 Author Share Posted July 1, 2009 Our first online training/demo is scheduled for this coming Friday (7/3) at 3pm Eastern, 12pm Pacific. I realize that we can't accomodate everyone with a single time/day, so we will vary our day and time for future trainings/demos. There is a dial-in # available for those who want to connect in via phone (long distance charges apply). Otherwise, chat is on-screen or via microphone. Date: Friday July 3rd, 2009 Time: 3pm Eastern / 12pm Pacific Meeting URL: https://webmeeting.dimdim.com:443/porta ... al_devices Optional Dial-In: 712-432-6139 Dial-In Code: 1234 Hope to see you there! Link to comment
MikeB Posted July 3, 2009 Author Share Posted July 3, 2009 Just a reminder that the training starts in less than one hour. Hope to see you there! Link to comment
TJF1960 Posted July 3, 2009 Share Posted July 3, 2009 Michael, Great Job. I am looking forward to more of these! Thanks again, Tim Link to comment
stusviews Posted July 3, 2009 Share Posted July 3, 2009 Thanks, Mike. I really enjoyed and learned from the session. Do it again! Stu Retired H.S. Teacher Mathematics/Computer Science Link to comment
jwagner010 Posted July 3, 2009 Share Posted July 3, 2009 Was this recorded for replay later? Link to comment
MikeB Posted July 4, 2009 Author Share Posted July 4, 2009 I wanted to thank everyone who was able to attend the training/demo today. I think it went fairly well, even if I did lose power here and we were in the dark for a minute or 2! We had a great turnout - at least 17 people attended (maybe more). I'm not certain yet if we'll be able to make the recording available. Either way, I'm considering creating a series of videos that would cover the same topics that were discussed today. I'll post more info ASAP. I'd also love to hear suggestions for future online sessions. Thanks again! Link to comment
MikeB Posted October 2, 2009 Author Share Posted October 2, 2009 Our second online training and demo has been scheduled for Saturday 10/10 at 8pm Eastern, 5pm Pacific. Target audience is the same as the last meeting - people considering purchasing the ISY and new users looking to get familiar with the ISY. There will be a dial-in # available for audio (long distance charges apply). Date: Saturday October 10, 2009 Time: 8pm Eastern / 5pm Pacific Meeting URL: https://webmeeting.dimdim.com/portal/Jo ... al_devices Optional Dial-In: 702-473-3463 Dial-In Code: 1234 Hope to see you there! Link to comment
MikeB Posted October 10, 2009 Author Share Posted October 10, 2009 Just a reminder that our online demo is today at 8pm EST. Hope to see you there! Link to comment
johnmsch Posted October 20, 2009 Share Posted October 20, 2009 Was this demo session recorded? I'm expecting my unit today and would love to watch the demo before I open the box! Link to comment
MikeB Posted October 20, 2009 Author Share Posted October 20, 2009 Hi John - Unfortunately not. We tried recording a previous session, but the quality wasn't there. I may try recording the next session, but we're also working on some short how-to videos that we'll have posted up. Link to comment
johnmsch Posted October 20, 2009 Share Posted October 20, 2009 Thanks for the quick reply. Any plans on doing the demo again some time soon? Link to comment
MikeB Posted October 20, 2009 Author Share Posted October 20, 2009 I hope to do one within the next 30-45 days. Please keep an eye on this thread. Link to comment
midrar Posted June 13, 2010 Share Posted June 13, 2010 When do you guys plan on having some type of ISY99 Insteon Training session or webminar? Thanks Link to comment
rmlinnovator Posted September 9, 2011 Share Posted September 9, 2011 Any where I could watch recorded trainings? Or are there any to be held in the future? Link to comment
Michel Kohanim Posted September 10, 2011 Share Posted September 10, 2011 Hello rmlinnovator, Unfortunately we do not have any plans. This said, SmartHome has regular training sessions all of which include training on ISY as well. With kind regards, Michel Link to comment
ritchcc Posted October 19, 2012 Share Posted October 19, 2012 Do you know yet when the next online training session will be. I'm seriously interested in getting completely away from SmartLinc and moving to the ISY994i. Anything I can learn about how to set it up and operate it as well as it's capabilities and interfaces will help. Thanks, Ritch Link to comment
Michel Kohanim Posted October 19, 2012 Share Posted October 19, 2012 Hi Ritch, Unfortunately we have not planned any more on line training. In the meantime, I am certain you will find our training videos as informational. And, you can always call us with your questions. Please checkout the links under Instructional Videos. With kind regards, Michel Link to comment
NivRam Posted May 10, 2013 Share Posted May 10, 2013 4 years later... are these demo videos ready yet? NivRam Link to comment
Michel Kohanim Posted May 10, 2013 Share Posted May 10, 2013 NivRam, Did you actually click on the link? With kind regards, Michel Link to comment
Recommended Posts