lpollis Posted September 26, 2009 Posted September 26, 2009 I am the 'new' guy so please bear with me. I inadvertently added a KeyPad button to a scene as a responder and I need it to be a controller. So I tried removing the button from the scene and cannot. I have a few others as well with the same problem. The progress box pops up, the event log says finished incomplete, and it take a long time. There are no flashing lights on the ISY-99, either network or PLM. Should there be? Assistance would be appreciated.
Michel Kohanim Posted September 27, 2009 Posted September 27, 2009 Hi lpollis, I really think you should contact our tech support just to make sure your PLM is not the culprit here. From all your posts, all indications point to the known old-PLM issues (the PLM gets tired and does not respond). With kind regards, Michel I am the 'new' guy so please bear with me. I inadvertently added a KeyPad button to a scene as a responder and I need it to be a controller. So I tried removing the button from the scene and cannot. I have a few others as well with the same problem. The progress box pops up, the event log says finished incomplete, and it take a long time. There are no flashing lights on the ISY-99, either network or PLM. Should there be? Assistance would be appreciated.
Recommended Posts