Jump to content

Mini Remote Linc 2 won't update


Kentinada

Recommended Posts

Posted
7 minutes ago, Kentinada said:

I have a Mini Remote Linc 2 that won't update. See the screenshot.  How do I debug this?  Thanks.

Screen Shot 2020-07-20 at 1.41.03 PM.jpg

Is this device in a folder? If so, remove it and try to right mouse click and write updates. Bring it close to the 2413S PLM while in linking mode.

Posted

@Teken They are not in a folder.  The Kitchen Motion-Sensor above is a folder of sorts.  I tried moving the RL2 to within a few feet of the PLM and it still won't update.  Should I try deleting the device and re-adding?

Posted
Just now, Kentinada said:

Sorry, operator error.  It's been so long since I've changed the buttons on this RL2, that I forgot about pressing the Set Button first.  All working fine. 

Rock On . . . ?

Posted
1 hour ago, Teken said:

Is this device in a folder? If so, remove it and try to right mouse click and write updates. Bring it close to the 2413S PLM while in linking mode.

It shouldn't need to be removed just to write updates. Remote only needs to be in linking mode

Posted
It shouldn't need to be removed just to write updates. Remote only needs to be in linking mode

I’m having a brain **** here. There was a specific reason a switch needed to be outside of a folder?!? It was some kind of setting that wasn’t visible unless outside of the folder??

I don’t recall what it was I’m thinking Replace With??


Sent from my iPhone using Tapatalk
Posted
Old age is a PIA. Lol. Yeah, it's the replace function



Older - Wiser - Faster!


Sent from my iPhone using Tapatalk
Posted
1 hour ago, Teken said:

I don’t recall what it was I’m thinking Replace With?? emoji848.png

it was....  when you right click an Insteon device in the tree the "replace with" context menu does not appear if the device located in a folder.  It must be moved to the root level to use the function.

Guest
This topic is now closed to further replies.

×
×
  • Create New...