Jump to content
View in the app

A better way to browse. Learn more.
Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Network Resources Are No Longer Working

ChrisMcA
in ISY994

Featured Replies

FWIW, I tried 10000 and still no go with Prowl. Will pursue change to Pushover.

2 hours ago, drprm1 said:

Don’t remember if I tried that long of a time out. My credentials didn’t change. Checked with Prowl.

Just finished switching all over to Pushover.

Thanks

Was the port to Pushover from Prowl difficult?

15 hours ago, MikeD said:

Was the port to Pushover from Prowl difficult?

No, just follow the Wiki.......  Just time consuming

Edited by drprm1

I've had the same problems with Prowl notifications as described above.  I have a solid install running 5.3.0 since late 2020.  Everything was running well until January 10, 2022 when Prowl pushes started to fail.  Many different error messages thrown by the ISY.   The Prowl API works fine using reqbin.com and sending the same POST request and content as used on the ISY.

I've moved my critical notifications to Pushover.  Everything works as advertised on that platform.

I have tried all of the fixes noted above with no success.  I have found that I can successfully send push notifications via Prowl if I use HTTP on port 80 instead of  HTTPS and port 443.  Could this be a certificate problem in the ISY??

23 minutes ago, samara said:

I've had the same problems with Prowl notifications as described above.  I have a solid install running 5.3.0 since late 2020.  Everything was running well until January 10, 2022 when Prowl pushes started to fail.  Many different error messages thrown by the ISY.   The Prowl API works fine using reqbin.com and sending the same POST request and content as used on the ISY.

I've moved my critical notifications to Pushover.  Everything works as advertised on that platform.

I have tried all of the fixes noted above with no success.  I have found that I can successfully send push notifications via Prowl if I use HTTP on port 80 instead of  HTTPS and port 443.  Could this be a certificate problem in the ISY??

It could be especially since you're on older firmware. I'd upgrade to 5.3.4 to see what happens

Guest
This topic is now closed to further replies.
Go to topic listing

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.