vbPhil Posted February 17, 2022 Posted February 17, 2022 So I just received the Zoo S2 stick 700 USB. I was currently using the 994i ISY with Z-Wave but I removed all z-wave devices from that network. Only have 3 so far. My plan is to keep using the 994i for Insteon but use the Polisy ISY for Z-Wave just until PG3 and everything is stable. First question is can I do that? 2nd question is how do I add the Zoo Stick to Polisy? I plugged it in, rebooted Polisy, started up the IoP but no signs of z-wave.
mjrush Posted February 17, 2022 Posted February 17, 2022 I have some Insteon on a 994i and Z-Wave and Insteon on ISY on Polisy. Do you have Z-Wave Support checked on the Configuration page? 2
Geddy Posted February 17, 2022 Posted February 17, 2022 @vbphil When in doubt check the wiki! https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide#Z-Wave_Support Hope it works out as you intend. 1
lilyoyo1 Posted February 17, 2022 Posted February 17, 2022 25 minutes ago, Geddy said: @vbphil When in doubt check the wiki! https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide#Z-Wave_Support Hope it works out as you intend. But then people would have to read instructions ?
lilyoyo1 Posted February 17, 2022 Posted February 17, 2022 1 hour ago, vbphil said: So I just received the Zoo S2 stick 700 USB. I was currently using the 994i ISY with Z-Wave but I removed all z-wave devices from that network. Only have 3 so far. My plan is to keep using the 994i for Insteon but use the Polisy ISY for Z-Wave just until PG3 and everything is stable. First question is can I do that? 2nd question is how do I add the Zoo Stick to Polisy? I plugged it in, rebooted Polisy, started up the IoP but no signs of z-wave. Itll work since they are 2 separate systems. Long term, you're probably adding more work to yourself when it comes to completing everything.
vbPhil Posted February 17, 2022 Author Posted February 17, 2022 1 hour ago, mjrush said: I have some Insteon on a 994i and Z-Wave and Insteon on ISY on Polisy. Do you have Z-Wave Support checked on the Configuration page? @mjrush oooops, forgot about that checkbox. I also had Insteon checked and no PLM plugged in yet so I got the z-wave dongle not responding message. Unchecking Insteon and all is fine. thanks
Recommended Posts