Javi Posted March 7, 2022 Posted March 7, 2022 21 hours ago, MrBill said: Which? I've been evaluating how to add more. Since you mentioned above that you only have one wired device I've become more interested in z-wave (so far I have no z-wave). Hi @MrBill, I purchased a few of these after testing one a few years ago, although they do not appear to be available now. https://www.amazon.com/gp/product/B07BK65MLH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 15 hours ago, JTsao said: If I right click and do set configuration parameter like you are suggesting above, then it appears that I can set the parameter to values > 127, however, I set it from the main screen which looks like the attached image below, parameter number=5, parameter value=X, then X is limited to 127 on this screen If the Unit of Measurement (UOM) is changed from 1-byte to 1-byte-unsigned it should allow for 0-255. https://hpccsystems.com/training/documentation/ecl-language-reference/html/INTEGER.html%23Integer_Value_Ranges 1
jkraus Posted March 10, 2022 Posted March 10, 2022 how do you add the Zooz sensors? D you just add it as a Smarthome motion sensor?
lilyoyo1 Posted March 10, 2022 Posted March 10, 2022 4 hours ago, jkraus said: how do you add the Zooz sensors? D you just add it as a Smarthome motion sensor? You would add it like you would any other zwave device. https://wiki.universal-devices.com/index.php?title=ISY_Users:V5:ZWave:User_Guide
jkraus Posted March 11, 2022 Posted March 11, 2022 Duh ? I did not realize it was Zwave. I have not experimented with zwave for a while, but last time I did, one located in my garage vs isy in office had spotty communication. I guess I need some type of relay?
lilyoyo1 Posted March 11, 2022 Posted March 11, 2022 28 minutes ago, jkraus said: Duh ? I did not realize it was Zwave. I have not experimented with zwave for a while, but last time I did, one located in my garage vs isy in office had spotty communication. I guess I need some type of relay? You need repeating devices. The very first post on this zwave forum gives some information about zwave
epete Posted March 14, 2022 Author Posted March 14, 2022 On 3/6/2022 at 9:39 AM, bob123 said: I have 3 new in box insteon motion detectors (not 2nd gen) - 2842-222, that I am not using. Purchased them about 5 years ago but used my ELK hardwired detectors instead. If you are interested, make me an offer. Thank you for the offer. I wanted to post that I have purchased these 3 motion detectors so folks know these are no longer available. 1
Recommended Posts