stevehoyt Posted March 21, 2022 Share Posted March 21, 2022 While looking at the info provided by the kasa node server, I noticed that even though the device is off the current power field shows the ON power usage. If I do a manual query, the current power is updated to the correct value i.e. zero. See screen shots below. Before and after a query Is this how it should work? Thanks Link to comment
larryllix Posted March 21, 2022 Share Posted March 21, 2022 While looking at the info provided by the kasa node server, I noticed that even though the device is off the current power field shows the ON power usage. If I do a manual query, the current power is updated to the correct value i.e. zero. See screen shots below. Before and after a query Is this how it should work? Thanks Is it zWave? That's the way all my limited experience with zWave has been so far.However, I found parameters that can control what power levels my devices will start reporting changes at. Most of these settings were not made user friendly by UDI updates and reading the tech manuals becomes necessary to make some zWave modules useful. Once you discover how and write a program to send the coded numeric messages the devices will act more like Event triggered devices, not needing queries constantly.Sent from my SM-G781W using Tapatalk Link to comment
lilyoyo1 Posted March 21, 2022 Share Posted March 21, 2022 5 hours ago, stevehoyt said: While looking at the info provided by the kasa node server, I noticed that even though the device is off the current power field shows the ON power usage. If I do a manual query, the current power is updated to the correct value i.e. zero. See screen shots below. Before and after a query Is this how it should work? Thanks I see that you're posting in the kasa sub-forum so I'm assuming you're using kasa devices. What devices are you having issues with? Is this on polisy or isy994? Firmware and UI? Link to comment
Jimbo.Automates Posted March 21, 2022 Share Posted March 21, 2022 He said this was for the Kasa Node server, doesn't really mater what firmware or UI Most likely the Kasa library is not sending a power number when it's off, so the NS didn't change the value because it was missing. But should handle it properly in the Kasa NS, issue created https://github.com/UniversalDevicesInc-PG3/udi-poly-kasa/issues/6 Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.