danncas Posted May 16, 2022 Posted May 16, 2022 I Have a 6 button key pad and a Fan Linc. I accidently deleted it and now playing hell to get it to work again. It still works via Alexia. 1st Question. WHY is button A and B defualt on. ????
lilyoyo1 Posted May 16, 2022 Posted May 16, 2022 25 minutes ago, danncas said: I Have a 6 button key pad and a Fan Linc. I accidently deleted it and now playing hell to get it to work again. It still works via Alexia. 1st Question. WHY is button A and B defualt on. ???? What are you using to control your devices? If you've deleted the device, Alexa should not be able to control it. Are you referring to the A and B button or the large top and bottom buttons
lilyoyo1 Posted May 16, 2022 Posted May 16, 2022 1 minute ago, danncas said: a and b A and B are not on by default unless you have an 8 button faceplate on a 6 button keypad making the large button A and B.
danncas Posted May 17, 2022 Author Posted May 17, 2022 update. I have every button doing what it should. Only problem is I dont remember how I made tnhe button light out for each scene ex.. button A when fan on high ect
kzboray Posted May 17, 2022 Posted May 17, 2022 Follow the directions in this link for either 5.x firmware or if you scroll down a bit you will find the 4.x setup. Both the 5.x and the 4.x listed will keep the lights in sync, and support voice integration and control via Alexa etc.https://wiki.universal-devices.com/index.php?title=ISY994i:INSTEON_Device:FanLinc-KPL_FanLinc_KeypadLinc_Configuration 1
danncas Posted May 22, 2022 Author Posted May 22, 2022 (edited) I found that The one Scene Doesnt work for what I want. So I have 4 Scenes high med low off. Now how do I get the A ,B,C,D, LED to light with each scene. I tried a program staus of fan motor to run a LED scene but nothing works. IDEAS ???? Edited May 22, 2022 by danncas typo
lilyoyo1 Posted May 22, 2022 Posted May 22, 2022 (edited) 20 minutes ago, danncas said: I found that The one Scene Doesnt work for what I want. So I have 4 Scenes high med low off. Now how do I get the A ,B,C,D, LED to light with each scene. I tried a program staus of fan motor to run a LED scene but nothing works. IDEAS ???? See link provided above. Just have to read through it Edited May 22, 2022 by lilyoyo1
Recommended Posts