PSiess Posted November 19, 2022 Posted November 19, 2022 (edited) What is the best practice for installing node servers? Install in Polisy or in Polyglot3? Sorry if this has been asked before. I searched but didn't find anything. Edited November 19, 2022 by PSiess
lilyoyo1 Posted November 19, 2022 Posted November 19, 2022 9 minutes ago, PSiess said: What is the best practice for installing node servers? Install in Polisy or in Polyglot3? Sorry if this has been asked before. I searched but didn't find anything. I found this wiki page which details what to do. https://wiki.universal-devices.com/index.php?title=Polisy:User_Guide
Solution MrBill Posted November 19, 2022 Solution Posted November 19, 2022 40 minutes ago, PSiess said: What is the best practice for installing node servers? Install in Polisy or in Polyglot3? Sorry if this has been asked before. I searched but didn't find anything. Polyglot3 is the future. At the moment both Polyglot 2 and 3 are available for use on Polisy. Installing new tho, you should use Polyglot 3. https://<IP.ADDR.OF.POLISY> will land you in the Polyglot 2 interface, perhaps what you are referring to generically as "polisy". https://<IP.ADDR.OF.POLISY>:3000 will land you in Polyglot 3 interface. of course in either of those examples <IP.ADDR.OF.POLISY> is a place holder, you need the actual IP address of your polisy on your local network, you can't literally type <IP.ADDR.OF.POLISY> (it might be obvious to some, but I didn't use to include this disclaimer and someone said "It doesn't work"). 1
PSiess Posted November 19, 2022 Author Posted November 19, 2022 Just now, MrBill said: Polyglot3 is the future. At the moment both Polyglot 2 and 3 are available for use on Polisy. Installing new tho, you should use Polyglot 3. https://<IP.ADDR.OF.POLISY> will land you in the Polyglot 2 interface, perhaps what you are referring to generically as "polisy". https://<IP.ADDR.OF.POLISY>:3000 will land you in Polyglot 3 interface. of course in either of those examples <IP.ADDR.OF.POLISY> is a place holder, you need the actual IP address of your polisy on your local network, you can't literally type <IP.ADDR.OF.POLISY> (it might be obvious to some, but I didn't use to include this disclaimer and someone said "It doesn't work"). Obligatory "Ohhhh noooooooooooooo!" Thanks @MrBill. That helps a lot. 1
Geddy Posted November 19, 2022 Posted November 19, 2022 @PSiess as @MrBill alluded to… Polisy = device/equipment Polyglot = service/software/operating system So all node servers are installed in Polyglot. Polyglot v3 is the current development portion.
Recommended Posts