epete Posted May 29 Share Posted May 29 Does anyone have any photos on how to assemble the Zmatter USB Dongle? The RF leads on the external connectors seem to be at the same height as where the Z-Wave/Zigbee card is supposed to be. Is the card supposed to somehow get placed beneath the RF Coax or above? I don't want to screw the card in and damage something. Link to comment
Geddy Posted May 29 Share Posted May 29 @epete you might be better off opening a ticket and asking UD directly about this. It's been a while since most were changing from the internal card to the USB enclosure. I seem to remember many snapping the card to get it to fit. But you'd be best served working directly with Universal Devices on that process. They aren't able to monitor the forums as much as they did in the past so open a support ticket and get your answer quickly. https://www.universal-devices.com/my-tickets Try to post back to let us know what they suggest and what you end up doing (and maybe sharing pics) to help others that might have this same situation. Link to comment
BamBamF16 Posted May 29 Share Posted May 29 The card snaps at that dotted line. Then it fits like butter. Scared the crap.outta me when I did it but it was intended to be that way. 1 Link to comment
epete Posted May 29 Author Share Posted May 29 Thanks. I will open a ticket to confirm. Link to comment
epete Posted May 29 Author Share Posted May 29 Looking at the board now, it seems there are no traces that go to the upper half of the board beyond the "dotted line" so that looks like correct solution but will wait on the ticket. Link to comment
Solution epete Posted May 30 Author Solution Share Posted May 30 Michael said in my Ticket "Hi Even, you have to cut it at the perforation. " 1 Link to comment
Recommended Posts