GQuack Posted Wednesday at 09:10 PM Share Posted Wednesday at 09:10 PM Ok, just upgraded from Polisy to eisy but didn’t want to fork out more money for the zmatter device. Chris helped me get the eisy off the zmatter default and back to the Zooz dongle. In order to make that work, needed to remove all z -wave devices and re-add them. Removed all of them, thought I would be smart and start over from scratch, did a reset of the z-wave dongle to factory settings, then upgraded the dongle to the newest firmware version through the anything but simple Simplicity Studio, typically the right course of action. Now, I can’t add any z-wave devices, no response at all to add device even when holding the z-wave device in close proximity to the eisy. Event viewer shows “Unrecognized Z-wave firmware version/library [7.18]” Perhaps need to revert back to a previous erosion for some reason or??? Quote Link to comment
mmb Posted Wednesday at 10:07 PM Share Posted Wednesday at 10:07 PM Not sure this helps but my brother is currently running this firmware download from Zooz. Zooz_ZST10-700_SDK_7.18.3_US Quote Link to comment
GQuack Posted Thursday at 12:30 AM Author Share Posted Thursday at 12:30 AM @mmbIs he running on a Polisy or eisy? Quote Link to comment
mmb Posted Thursday at 12:35 AM Share Posted Thursday at 12:35 AM (edited) eisy. My brother had no devices to start. He chose to start fresh with the zooz. Edited Thursday at 12:38 AM by mmb Quote Link to comment
GQuack Posted Thursday at 12:48 AM Author Share Posted Thursday at 12:48 AM What controller device, not z-wave device? Quote Link to comment
mmb Posted Thursday at 12:54 AM Share Posted Thursday at 12:54 AM Just a USB Zooz Z-Wave stick off Amazon Quote Link to comment
GQuack Posted Thursday at 01:26 AM Author Share Posted Thursday at 01:26 AM (edited) I like your method, let's try this. He plugs this stick you show in the picture into one of the two devices shown. Polisy (blue) or eisy (Black). Do you know which one? Edited Thursday at 01:33 AM by GQuack Quote Link to comment
Geddy Posted Thursday at 02:43 AM Share Posted Thursday at 02:43 AM 1 hour ago, GQuack said: Do you know which one? eisy (it’s in his reply! Bold added for attention.) 2 hours ago, mmb said: eisy. My brother had no devices to start. He chose to start fresh with the zooz. 1 Quote Link to comment
GQuack Posted Thursday at 03:01 AM Author Share Posted Thursday at 03:01 AM Missed that thank you. Now to figure out what’s happening with mine… Quote Link to comment
GQuack Posted Thursday at 05:57 AM Author Share Posted Thursday at 05:57 AM Verified the update I made is to version 7.18.3, still unsuccessful with any recognition of trying to add a device. This Z-wave stuff has just been a big pain in the a.. since day 1 for me. Guess if I'm going to continue trying to use these devices, I'm going to have to move to the Zmatter device. or see if I can revert back to version 7.15 and see if that works. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.