Posted December 22, 2024Dec 22 Got a new smart lock from Yolink. The fingerprint deadbolt YS7616-UC. I realize it’s new and maybe not supported yet but it is classified as a smart lock which I believe is supported? Anyway I’ve done everything to try to get it to show up in AC with no success. Is it supported yet? thanks!
December 22, 2024Dec 22 Are you using hte yolinnk plugin? Yolink devices wont show in EISY or the AC as they use their own proprietary long range signal. The plug in is the "interface". You also need a YoLink hub.. Maybe stating the obvious here, but just trying to clarify where to start with trouble shooting.
December 22, 2024Dec 22 Author Yes I have a hub and yes I use the Yolink plugin. I have about 30 other Yolink nodes that show up in the AC…..all except my new lock. Was hoping Panda had a solution here. Edited December 22, 2024Dec 22 by drprm1
December 23, 2024Dec 23 Can you send me (message me) a log with debug enabled - I only have the old lock and it works - it may need a new Driver - I should be able to see from log
December 26, 2024Dec 26 Solution I hear back that there is a new API, but be old one may work ok for now - the new one is not released yet
January 6Jan 6 It seems the command was changed - I'll see if I can support both ways in the lock device
January 9Jan 9 Author Still not showing up in AC Assume you want log. Will send it in morning Edited January 9Jan 9 by drprm1
January 9Jan 9 I did not release a beta version yet look for 1.3.11 in the non-productionstore - testYolink node
January 9Jan 9 Author Pardon my ignorance here but are you saying to install the test node in its own slot to see if my lock shows up?( don’t want to mess up what I already have) Thanks
January 9Jan 9 look for 1.3.11 in the non-production store - testYolink node yes - you can store in a separate node (maybe stop your existing one while testing) Make sure you install again - I forgot to add the new lock in the previous version
January 9Jan 9 Author Stopped yolink node, installed the test node, configured it and ran it. Only three devices showed up here out of 37. Unfortunately no lock. YoLinkTest_1-9-2025_122103_PM.zip Edited January 9Jan 9 by drprm1
January 9Jan 9 I seems you got an earlier version where I limited the devices (and not included the lock) - I just put 1.3.12 up - try to update - it may take a little before it is ready
January 9Jan 9 Author Also tried deleting test node and reinstalling in new slot. After configuration it never shows connected. When I try and start it show “already running” but it’s not connected. log is empty
January 9Jan 9 Sorry - I forgot I set it up with fixed file It will have to wait until I get back home - after 4pm PST
January 10Jan 10 Author Still shows 1.3.12 in store? sorry, refreshed and got it. Edited January 10Jan 10 by drprm1
January 10Jan 10 It takes some time to propagate - you can try refreshing the page but it can take up to a couple of hours before posting
January 10Jan 10 Author installed 1.3.13 and still not showing connected. Restarted several times and not connected
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.