Installed in different slot, configured and started. Not showing connected

Seems there is an issue - you can try to reinstall 

I changed the install style 

Edited January 10, 20251 yr by Panda88

Okay great! My lock is now showing up in the test node.Didn’t see what it looked like like in the AC

I’ll look forward to the production update and thanks!

can you generate a debug log where you open and close the lock and query it

 

I will at halftime 😜

Here you go

YoLinkTest_1-9-2025_124948_PM.zip

Lock shows up in AC but controls don’t change the lock’s state

Seems like the log you sent is old

Can you generate a new one - manually opening the lock and then try to control it from teh AC as well .   I am a little guessing on the control (until official API is posted)

Here is the log. I controlled the lock several times manually and from AC

YoLinkTest_1-10-2025_80937_AM.zip

When using the test plug-in none of the nodes seem to update in the AC.

Edited January 10, 20251 yr by drprm1

Maybe you can try to stop the regular node server while testing

I found part of the issue with the new lock - I can likely get to retrieve data fairly easily, but controlling it may be more difficult without documentation 

 

Pretty sure I stopped the regular node for this test...Did another log. Started test plug-in and let it find all nodes for a few minutes then I used the AC to lock, unlock, and query several times then locked and unlocked several times manually. (regular node was stopped)

Here's the log

YoLinkTest_1-10-2025_80937_AM.zip

Edited January 10, 20251 yr by drprm1

thanks

it will not work yet as the syntax is not correct yet

I'll get to it early next week

Can you try 1.3.14

Updated YoLink Test to 1.3.14. I can control lock via AC fine.  Manually controlling lock or control by Yolink app the status in AC isn't updated. The node isn't updated correctly when using "update status" or "query" either.

Even though I can lock and unlock using AC it shows Nodeserver status as "not connected" and connection state as "offline"

YoLinkTest_1-13-2025_24659_PM.zip

Can you try 1.3.15 

I will only pick switches and locks - The code somehow gets the online status wrong, but I cannot figure out why - added some more debug info 

 

1.3.1.5 tried. Same functioning as 1.3.14

YoLinkTest_1-13-2025_80848_PM.zip

can you try 1.3.16 

Quote

 

 

Nice! Works as it should. AC status updated when changed manually or by Yolink app. Can control from AC. Shows online and connected.

(Nitpick, battery shows -1)

Appreciate your efforts

can you include the latest log - I'll try to fix the battery - should be easy - probably just reported differently 

 

Just now, Panda88 said:

can you include the latest log - I'll try to fix the battery - should be easy - probably just reported differently 

 

 

YoLinkTest_1-14-2025_112114_AM.zip

Does the new lock include a doorbell - if so can you try to press it and send me a log 

 

 

Here is the log with me pressing the doorbell a couple of times.   Not sure who would use the doorbell its very hard to see the symbol on the keypad.

YoLinkTest_1-14-2025_122453_PM.zip

released 1.3.22 - give it a try 

 

updated to 1.3.22 Dashboard shows "disconnected" If I try and start plugin a green pop up says "already running"

 

No log is showing