4 hours ago4 hr I'm just getting used to EISY-UI after using Admin Console for 20+ years. It seems really nice.But how do I add X10 devices? I still have a few old ones I would like to continue to use if possible since Insteon no longer sells equivalents, but it looks EISY-UI has moved on?If I go to Protocols > Insteon and start a linking process, I can drop down a list of hundreds of old devices to choose from, but there's no mention of X10. I swear Admin Console had a "Generic X10 Device" option or something like that that I've used in the past, but it is no longer on the list.I have three existing X10 Universal Module devices I set up years ago (in AC) and they appear in my nodes, but they all say "Unknown type:113.2". They do turn on/off as expected in EISY-UI, which is good.So how can I add a X10 Powerflash PF284 or any other X10 device to EISY-UI?
4 hours ago4 hr As far as I know, X10 devices don't need to be added to the device tree to use them with ISY.You can address them directly in programs using their house and unit codes.For example, Send X10 A1/On or A1/Off to control a device. You can also use an X10 Received condition to react to signals from something like the Powerflash PF284.The old optional A10/X10 module allowed you to create named X10 devices in the device tree, but that wasn't required for basic X10 operation.I haven't verified where the newer eisy-ui exposes the X10 programming options, though. If those options are missing, that may be an eisy-ui interface limitation rather than removal of X10 support.-Mike2545
3 hours ago3 hr You can add them as you manually add Insteon devices: Go into Insteon -> New Insteon Device, and key in the X10 address directly, eg: A1 and give it a name.
2 hours ago2 hr From AISteps to Add an X10 Device in eisy-uiLog in to eisy-ui. Open a web browser and navigate to http://eisy.local (or access it through your ISY Portal account) and sign in with your portal credentials. Open the Devices / Link Management Menu. Navigate to the Devices management section in the web interface where new Insteon, Z-Wave, and Zigbee devices are added. Select Manual Device Addition. Choose the option to Add an Inste / X10 Device manually (rather than scanning a QR code or starting auto-linking). Enter the Device Name and Type. Give your X10 device a descriptive name and select the X10 device category/type from the device type dropdown list. Input the X10 Address. Enter the combined House Code and Unit Code without spaces or punctuation (for example, enter I9 for House Code I, Unit 9). Save and Test. Confirm to create the node in your device tree, then test turning the device On and Off directly from its tile or device page in eisy-ui. Important Limitations to Keep in MindAdmin Console Fallback. While Universal Devices announced full device-management parity in eisy-ui ahead of retiring the Java Admin Console in December 2026, if an older legacy A10/X10 module type does not appear in your browser dropdown, you can still add it via Link Management > New INSTEON/A10/X10 Device in the IoX Launcher Admin Console.
Create an account or sign in to comment