oskrypuch Posted January 1, 2011 Posted January 1, 2011 KeyLincs using 2.7.15 This does not seem well described, or I've missed it. A couple questions ... 1) What is the "default" initial setting for the LED ON and OFF (background) levels? I understand that ON can vary 0 to 15, and the OFF from 0 to 7. 2) When you send an ISY program command for LED brightness, it has you select a specific keylinc button, I presume that that will still affect each of the device's buttons equally, that is only on preset brightness? * Orest
apostolakisl Posted January 1, 2011 Posted January 1, 2011 I once had a keypad linc led brightness adjust from a program and it seriously scrambled stuff. I ended up having to remove the switch from ISY, factory reset it, and put it back to ISY. I don't know why this happened but I will never use programs to change the led brightness again.
oskrypuch Posted January 1, 2011 Author Posted January 1, 2011 That was bad juju. My wife acts likes she has "transparent eyelids", and insists on the LEDs being turned off at night in the bedroom. Leaving them that way during the day would make the switches largely useless, so I'm in a bit of bind. I've left my sunrise routine to switch to 12 ON/1 OFF, and at night it switches to 1 ON/0 OFF. I'll keep an eye out. * Orest
Teken Posted January 1, 2011 Posted January 1, 2011 Please do keep us updated, as I am in the same boat.
oskrypuch Posted January 3, 2011 Author Posted January 3, 2011 So far, working just fine, and wife is happy. (job one) These are brand new KL, so they would be latest firmware, FWIW. * Orest
midrar Posted September 2, 2012 Posted September 2, 2012 So has anyone ever found out what the default settings for Off/On levels? I've played with the settings on one keypad and I would like to put it back to default to match other keypads without having to delete and reprogram. Thanks
LeeG Posted September 2, 2012 Posted September 2, 2012 Devices come with full LED brightness. An Off/On of 7/15 should get it back to that level.
Recommended Posts