apostolakisl

But advanced options is the only way to use a custom icon even if you don't want to map to any particular value. I ended up putting a node in there that is always off as a work around.

This one tile lacks several of the choices like advanced status config. Edit. Looks like you must have a display node to get advanced options. However also it is showing the wrong icon in upper left corner. That is supposed to be a light bulb. It does show a light bulb after a while.

For reasons that aren't clear, they now show up as blue and red despite doing nothing.

Never mind, deleted the node and started over and this time it "took"

PG3 console shows it as connected with 2 nodes. ISY shows disconnected and no nodes. The sign in to wireless tag went fine and it said it got authorized and indeed I have two devices. Tried a full reboot of Polisy and did not fix it.

I got it to work with two url's one for each color. But what is not clear is why they both show up as blue on this website and the one is red and the other blue on UD mobile. https://lh3.googleusercontent.com/d/1YggIgfB681Rp3bLwxBVPOA2wNQY6Gpgv https://lh3.googleusercontent.com/d/1iBEDJtkUlm3NYaSeevobRod6QGrtY558

@Javi I tried that and it didnt't work. Still just get a red box when I tried to change the color to red. I opened the icon in my photo editor, saved as a png file, uploaded to google drive and then put the id into the format listed on the webpage. You can see it is a png file in google drive. https://lh3.googleusercontent.com/d/1iBEDJtkUlm3NYaSeevobRod6QGrtY558 Also, when I open ud mobile after not using for a while, the value isn't populated at all. So why would listing any value or value range trigger the substitution of the desired icon when there is no value at all? I tried "greater than or equal to 0" and it still puts the default icon up for about 5 seconds until the values populate. EDIT: I found an online tool that lets me replace all the pixels of one color with a different color. So I can just have two icons of different colors that are otherwise identical. It appears that UD mobile access the URL every single time it uses the imgae. Correct? Rather than download and save the image?

Here is an icon I found and loaded it up for my fountain. That same website has a bunch of variations as well. https://img.freepik.com/premium-vector/water-fountain-icon-logo-vector-design-template_827767-158.jpg The problem I have with it is that when the fountain is on, I want it to turn red, but setting it to do that just overwrites the entire box with solid red. I could make a second icon that is red, but as far as I can tell, you can only upload an icon from a url. While I could probably figure a way to load an image to a website so that it is accessible by url, is there an easier way? Other issue is that since it is not the default icon, I can only configure a custom icon in the advanced settings section which are triggered to appear only when the conditions you set are met. Since it takes a few seconds for the status of the node to populate, it defaults to the standard icon and then only shows the custom icon after the value is populated. @Javi

Just installed 1.1.79 and am happy to report the issue is fixed.

I am on 1.7.77 but do not know how to initiate an update to a newer version. Can you tell me where to initiate that update? Never mind, I got it updated to 1.7.78 and like the others, it still has the same issue.

I just checked my wife's phone (s24). it is exactly the same. top two right tiles and 3rd row on the left.

curious how this just happened. Was there a software update that happened without my knowledge in the last couple days? I first noticed the issue a couple days ago, perhaps it was Saturday? I forget, I was busy when I first noticed it and just ignored it at the time. Here is another example, again the top 2 right tiles, but this time not the 3rd row on the left. On this occasion, the 4th row is of a different format, so perhaps that is why the row above is not affected?. What you can't see on the screenshot, is the top two right tiles still have the icon, but it is almost invisibly hidden behind the favorites banner.

This started out of the blue. See photo. Tried restarting ud mobile then the phone. Samsung s22. Tried editing tile size. Tried moving the tiles and whatever tile is in the spot gets affected. This is on multiple folders but not the same location.

Never mind. Figured it out. Here are the settings where 192.168.1.71 is the LAN address for the computer running nodelink.

I have two CAI webcontrol boards connect to ISY. Both track status changes in the board just fine. But when I try to control the outputs, I get the following error. Not sure what credentials I am missing or if this is an error of ISY talking to nodelink or nodelink talking to CAI. Ideas?

Again, I would say that probably the SSD is not broken, but just data corrupted. Perhaps you have done some testing and know otherwise. That happened to me and UD sent me a bootloader chip that allowed me to restore the drive. I just plugged it in, powered it up, and then I could log in and install all the latest from the updates pages.

Did you put a ticket in to UD regarding your failed Polisy? I don't think they have a hard drive, I believe it is an SD card, not sure, but I am confident it is a solid state device. How do you know the drive is bad and not just corrupted? UD sent me a boot loader chip when my Polisy got scrambled and then I was able to restore the entire device.

5.0.16C is the final release for 994i that supports zwave 300. Upgrading from 4 to 5 may cause some quirks that you need to manually correct. Go through all of your devices and make sure they all communicate and look through your programs. When I updated, I recall very little in the way of issues. As far as I know, it is totally stable, free of bugs, and supports polyglot. If you don't have z-wave 300, you can update to 5.3.4. I have a 994i running 5.0.16c with polyglot running on an rpi and it keeps working without any surprises. v5 has a lot more features and aside from not supporting the latest version of polyglot, it has all the functionality of the most recent EISY. Make a backup, then download the update from the below link and follow instructions.

Is this actually going to happen? It really has been a very long time. Perhaps someone else who owns a Tesla should take it over?

Looks like it is working.

Still can't connect. Same thing as before.

Started 2 days ago here as well, but there were no updates or any changes to anything in the system or network.

Same issue with me as well. Didn't notice this thread and already submitted a ticket. I have two ISY's on the same login for the portal. One works fine, the other does not. Everything works fine using a local connection. I get a 404 error in UD mobile for just the one ISY. Other users on the same ISY with their own portal accounts also are seeing the error. Despite the error, UD mobile still displays the device list and I can still control the devices, but the status isn't populating correctly. I can also synchronize UD mobile to ISY without error. I tried rebooting ISY to no avail. Using the portal on my pc to login with the java console, I get authenticated and loads the device tree, but then gets stuck at "starting subscription" and just swirls and swirls.

I have a situation where I would like a youtube channel that goes live to trigger an ISY program. Is that possible? Even better, it would also trigger when it stops being live.

Suggestion to change the name of the plugin from hunterdouglas to HunterDouglas. The plugin store does not alphabetize the lower case letters where you would expect it to be. I didn't realize the node existed until I saw this thread and used the ctrl-f "hunter"