macjeff

I have had a few random of these. Ecobee is one of them but there was another but not all of them. It may be related. See screenshot @bpwwer- If you want to see my logs send me a PM

This happened to me also but when upgrading Notification NOT the pg3x. You need to go UD Mobile app Click on notifications tab at bottom Click on the gear icon for settings Your key will be there. What I did is copy it and email it to myself so I could get it on the computer to paste into the Notification NS config

Its very strange but I am glad you listened. I have almost the exact screenshot from my machines. Thats why I recognized it. There are TWO steps I told Michel that need to be added to the upgrade procedure. First is to go into the browser and delete all site data for your polisy. (not everything) Then it should work I am a mac user so I think they thought it might be a mac browser issue but mentioning EDGE you probably are using a PC though they do have Edge for mac now. The second is after everything looks fine, reboot polisy one more time. I had some VERY STRANGE ISY issues after the upgrade. Got to the point I could not even access it with admin console. One more reboot and ran for 2 weeks just fine until I did the Manual PG3x update this past week.

. Bob I had that exact issue on both polisy units and it turned out to be browser cache. I downloaded some other browser like opera and it worked fine and then I just cleared all the data in my browser for polisy and then it worked So if I restart does not fix it then try browser.

That looks like the browser cache issue. try another browser you have not used.

It took a while for mine to appear. Like I said at least 30 min. I am worried if you restarted again before its done what will happen. One thing I did not mention is create a backup first!! I did not need it but you can never over backup

Safari worked fine for me. Firefox did not. See instructions I just posted. Worked on two polisy units.

Thats correct. It is just a flag that turns on. I just did it on a second Polisy I have and worked fine 1. run command but I would replace polisy.local with your IP address of polisy which I had to do https://polisy.local:8443/rest/pg3x.enable 2. it will give you the normal Https insecure warning but find option to go to page anyways 3. Should ask you to login and login with polisy credentials 4. you will get the XML error you said. Its because its just setting a flag 5. Power Cycle Polisy AND WAIT. Took 30 min on mine. 6. Empty Browser cache or try adding ? to the end of your Polisy URL which should force it to load without cache. 7. Pg3 should now say pg3x. Make sure all the nodeservers are running. 8. Then I had to reboot Polisy one more time because ISY was acting strange- happened on both polisy's but a second reboot fixed. the important thing is be patient. If you restart it too soon I am not sure what will happen.

If you reboot pg3x I get a notification of every nodeserver coming back online. I want to know if one goes down or comes back up but with 25 nodeservers can you add a way to disable notifications on Pg3x restart?

Do I need to change all the programs to the new one or will both continue to work. I do like the new node but if I dont have to I dont want to have to redo all of the programs. thanks!!

I guess for #2 above you can create a group for each phone in the family. That would accomplish the same thing.

There is the old Service ISYPortal iOSPush and the new UD Mobile node. Can you explain why to use each. I tried and both work. The only thing about UD Mobile is it only allows you to send to group not device and I put that in another topic. (but you can create a group for each single device if you want) But are you going to get rid of the other and giving us time to edit the dozens of programs that use the old one? If you are going to remove the old one anytime soon let me know, but I have a feeling they both us a different method. I just want to understand more before I make any program changes. THANKS!!

1. Not a big deal but after updating my UD Mobile it deleted my API key for UD Mobile. No big issue- Just added it again. All other configs stuck. 2. In screen in picture, should we not be able to specify a single device. I know it says group but for testing I want to test just to my device not my entire family. This lets me ONLY select my family group. I think it should be Group/Device

I am sure there will be others. Again I love Michels suggestion. I guess I could enter all of those

Although I really appreciate the efforts this is too much for my math skills. I like Michel's idea unless someone has a program they have written in the ISY they would share.

My daily routine is to go to the store, click on the MODIFIED column and see the latest ones to be modified. Yes it would be nice to have a quick glance. That is what is supposed to happen on the dashboard. You should get a notice but I have seen it not worked on older installs and also it seems delayed. I also wish updating was easier. Jeff

You can also do what @JBlake01said to do in previous post. Basically the same thing since that is where the update button takes you. But I always do my method.

In latest pg3 or pg3x you have to RESTART the nodeserver. The authenticate you see in the picture will change to update. then click update and a dialog will come up and click update again. This is for ALL nodeservers

I need to calculate Easter. Here are the rules The simple standard definition of Easter is that it is the first Sunday after the full Moon that occurs on or after the spring equinox. If the full Moon falls on a Sunday then Easter is the next Sunday. Timedata does month and season. Climacell does moon phase. ** Yes I know there is a google holidays but it only flags which days are holidays- yes or no. And the issue is other holidays fall in the same period. So I need to know for sure if its easter. So how can I calculate using TimeData and Climacell when Easter is. So I know its Spring and I know its March or April. Now how do I say (AFTER) the first full moon???

This has happened to me a few times. Easiest thing is make a new Alias. after you run the START it creates a JAVA app. That JAVA app is cleared when you do a full cache and applet clean. So run start again just to be sure its there. Then in finder go to the GO menu and choose GO TO FOLDER Type in this path name but replace *USER* with your user folder name.... (you can check user folder name by going to hard drive and open Users and you will see all the user folders in there.) /Users/*USER*/Library/Application Support/Oracle/Java/Deployment/cache/6.0/bundles/ Hit return and you should see a window like in the picture Click on the ISY Launcher and under the FILE menu choose make alias. Move that Alias to your desktop or whereever you want it. It now should work for you fine.

Developer said you not using correct API info for the pro I see this in log 023-05-08 15:29:54,827 Thread-12 udi_interface.node ERROR node:setDriver: 03b09cf3705dad:HotTub Invalid driver: CC 2023-05-08 15:29:54,829 Thread-12 udi_interface.node ERROR node:setDriver: 03b09cf3705dad:HotTub Invalid driver: GV16 2023-05-08 15:30:31,259 Thread-12 udi_interface.node ERROR node:setDriver: 528abefa36afaf:Aquarium Invalid driver: CC 2023-05-08 15:30:31,260 Thread-12 udi_interface.node ERROR node:setDriver: 528abefa36afaf:Aquarium Invalid driver: GV16 as you can see in the Beverage Fridge picture it does work for tags. Developer (Mike) said the Web Version gets the same data so something is wrong or the wrong driver. Also one other thing. Notice the LAST UPDATE TIME on the Beverage Fridge. Why cant you convert that to time? Or maybe its just too hard to convert

After upgrading to Pg3x this is not showing Online status. It always says TRUE but it is updating.

Upgraded to PG3x and now online is blank but it is updating

Transmit Power does not show up on any of the tags on the website (including the ones that work in the Nodeserver). Its not something they seem to offer there. So if it cant display for all types of tags then remove the field. But Signal DOES show up for the ones not showing up. See screenshot One thing it does show on the website that would be great on the nodesever for tags that use probes is probe type. There is a bug (and they know it) where sometimes the probe type changes to another type. I have to go into the app and change it back to the one I have. That would be great to run a program- If probe type is XXXXX then change back to the one I have.

I have two of them so its not a probe issue. See screenshots All other tags are showing it but they are normal indoor tags