vbPhil

Seems like we need new firmware in the PLM to not issue that phantom All On. Is Insteon aware of this issue? I'm probably late to the party and all this has already been said.

The I3 Paddle did not actually come on but the On/Off module did. The follow up query shows the I3 Paddle Off and the On/Off Module On.

Yup, I've got an awful lot of pre v.45 firmware and they all came on with the All-On button. Also, my I3 Paddle v.54 and a 2635-222 On/Off Module v.48 came on.

I'm confused about the phantom All On phenomenon. I just had one this morning where all my Insteon devices came on, at least I think all of them. I was still in bed asleep, and it woke us up. In a sleepy stupor I just started turning everything off from my iPhone without troubleshooting. Is the phantom All On only turning on those older devices that have the All On function or will all devices new and old respond to that All On command?

No I'm on Polisy. I also noticed that it wouldn't do a reboot from the AC. Knowing that @Michel Kohanim said do not unplug, I tried a "sudo shutdown -r now" from a PuTTY connection and that fixed it. I can now login to PG3 and Insteon is working from IoX at version 5.8.0.

Upgraded IoX to 5.8.0 but now when I launch Polyglot V3 from AC and submit my Login I'm getting this response. I've seen this in the past but can't remember what it means or how to fix it. Also, this url isn't working either, https://192.168.1.180:8443/WEB/sysconfig.txt Any ideas?

Is powering down Polisy necessary? I would think just closing the Admin Console would suffice?

I keep using them when they still work especially around the Holidays when you need extra modules for all the string lights.

I had a similar problem long time ago for my location in Albuquerque. UDI had to change the rules. The list of Locations shown when selecting the AC Change Location button is wrong for Albuquerque. It shows the Albuquerque Daylight Saving Rule is America/Phoenix, it should be America/Denver. Phoenix does not change to Daylight Saving. I wonder when that rule was changed. I've never had this problem before.

File/themes/Font Size/

for Polisy https://polisy.local:8443/WEB/sysconfig.txt

My POLISY upgrade to 3.2.8 completed without a hitch. The OS was also upgraded to 13.2 from 13.1 and ISY to 5.7.0_1 from 5.7.0. There could have been more changes but the layout of sysyconfig.txt also changed so it's a little difficult to compare the before and after. https://polisy.local:8443/WEB/sysconfig.txt I have all my ISY programs disabled anyway so I can't say if they were affected. Also, not using any Node Servers so I see no problems there.

Ah … The good old days. UDI is missing the boat by not continuing to produce the ISY. It’s the only solution when using Insteon.

I’m impressed but how can you possibly have that many programs?

Before I run Upgrade Packages for this PG3x release I was wondering the status of the Polisy OS 13.02 upgrade. When I select the Upgrade button I get this warning.

// use this to get the version numbers of all the code https://192.168.1.180:8443/WEB/sysconfig.txt use your ip address.

Yes, just saying it wasn't upgraded.

My Polisy 5.7.0 upgrade was successful and Insteon control is operational. I don't have any ISY Programs, PG3 Node Servers or Z-Wave devices. Looks like OS wasn't upgraded.

My awning is a newer model Somfy motor that has an rf remote and 'Im using an ESP32 microcontroller with it that interfaces with Home Assistant. I know that's not your situation but. I do have an open/close sensor on the awning, so I know when it's open or closed. You could do that much with Insteon too. I use that in a script so when the wind exceeds 15mph and the awning is open it sends a close command. Comes in handy with all the winds here in New Mexico. Also, when you get the controller figured out, measure the time to open and close and you can use those values in a script as well to partially open and close the awning at different times of the day. Just some ideas. @Techman gave you some good pointers when using a IOLinc.

That works except it's not UDX but isy isy-5.6.4_8 ISY Port to X (IoX)

okay. I have a Polisy.

I upgraded but I can't find the version out that many digits. All I see is 5.6.4 via the AC, PG3 or the ISY Portal.

I upgraded Polisy with the Zmatter internal module and would not do it again. I was using the Zooz 700 USB dongle at the time and so went through the migration process during the time it was initially released. I was unhappy with all the migration issues to the point where I installed Home Assistant with my Zooz dongle and now run all ZWave there. I love Home Assistant and using Polisy only as a Insteon controller interfaced to Home Assistant. I'm not running any Polisy node servers as everything I need is in HA. For the short time I ran ZWave from Polisy with the ZMatter module I didn't notice any increase in range or communication. At this point I'd be satisfied just to have the old ISY 994i back and the money I spent on Polisy and ZMatter.

Is this the support forum for 5.6.4?

What values are displayed when you expand the dropdown next to the on button in the lower right corner of that screen?