vbPhil

That works except it's not UDX but isy isy-5.6.4_8 ISY Port to X (IoX)

okay. I have a Polisy.

I upgraded but I can't find the version out that many digits. All I see is 5.6.4 via the AC, PG3 or the ISY Portal.

I upgraded Polisy with the Zmatter internal module and would not do it again. I was using the Zooz 700 USB dongle at the time and so went through the migration process during the time it was initially released. I was unhappy with all the migration issues to the point where I installed Home Assistant with my Zooz dongle and now run all ZWave there. I love Home Assistant and using Polisy only as a Insteon controller interfaced to Home Assistant. I'm not running any Polisy node servers as everything I need is in HA. For the short time I ran ZWave from Polisy with the ZMatter module I didn't notice any increase in range or communication. At this point I'd be satisfied just to have the old ISY 994i back and the money I spent on Polisy and ZMatter.

Is this the support forum for 5.6.4?

What values are displayed when you expand the dropdown next to the on button in the lower right corner of that screen?

Yeah, but does it dim? If it were a dimmer, then it'd be exciting for me.

Thanks. The power down fixed it. I guess reboot isn't the same as a power cycle.

I don't use any node servers, but I try to keep PG3x up to date. I did the 3.1.3.6 update the other day and everything went fine. Today it's not letting me login, I'm getting a 408 Request Timeout error. I did a reboot but I'm getting the same thing. What can I try to troubleshoot?

I tried Remove From Zigbee Network but it's not removing it. Looks like UDI Z-Wave all over again with a very unstable beginning.

I tried my Philips Hue A19-E26 Colored Smart Bulb again but first I added it to the Hue Bridge and then deleted it. Hoping to reset it or something like that. I then put IoX in Add A Zigbee Device mode and it did find it and the bulb blinked for about a minute. It was added as ZB 52391.1 Unavailable and no controls were added to its page on the Main Tab. Looks like it was unsuccessful. There's data in X-Ray for it but I don't know what I'm looking at. I did try an Update with Interview but no help. So anyway, just wanted to pass that along since @SSSasked the question.

I forget that every time.

You might try checking and unchecking z-Wave and or zigbee checkboxes and do a Restart IoX. Maybe that will force it to do some cleanup. As always be sure to do a backup.

Just curious. Are you using the internal ZMatter module or the USB version? Also, what does the AC Main Tab display look like? I'm interested in the control switches and fields that are exposed. thanks.

I noticed the Beta branding on the ZigBee menu in the AC as well. I think Z-Wave had it too but I stopped using that, so I don't know if it's still there.

I just tried a spare Philips Hue color 800 bulb that wasn’t ever added to my system before. I put the Polisy Zigbee add device active, screwed in the bulb, and IoX never saw it. I’ve never added a Zigbee device so I guess that’s how you do it. I have Polisy with the ZMatter module internal and the antenna is hooked up.

The Zigbee release notice just mentions the ZMatter USB requirement. I'm assuming that my Polisy with the internal ZMatter module supports this ZigBee release as well?

I don't see anything in that thread that indicates the i3 Paddle adds as a dimmer with all the correct dimmer configurations in the AC display. There's mention about the i3 Dial working as a dimmer. Are you sure you are saying the i3 Paddle switch is shown as a dimmer in IoX and works for you?

For an update on this topic, I reinstalled my i3 Paddle wall dimmer and IoX 5.6.2 still only sees it as a switch and not a dimmer. I don't see any way to configure it differently.

I don't see it there.

From the AC, Upgrade Packages. I decided to do a Reboot from the AC and that brought PG3x on line but didn't bump up the version shown. It was also displaying that a PG3x restart was required. Not quite sure how to do a PG3x "restart". I just ran the Upgrade Packages again and it seemed to have taken this time. I was able to launch the PG3x dashboard in the browser and it shows version 3.1.36. But, it wants a "Restart". I'll be dammed if I can find anything that says PG3X Restart.

After updating I can no longer connect to PG3. What should I do next?

I did the upgrade packages and it's still showing 3.1.31. Also tried a browser refresh and a reboot but it's still showing the previous revision number. I only have the Notification node server installed and it was still spitting out notifications so I guess it's still working. BTW... I'm on Polisy.

That announcement doesn't provide much guidance for deciding which to use, PG3 or PG3x and why are there 2? Seems like you'd only want one series to maintain going forward.

This upgrade announcement states "PG3x v3.1.29 for eisy and Polisy". I'm on PG3 3.1.21 for Polisy. Now I'm confused about what PG3x is for. I thought it came out for EISY only? Is there some info on this somewhere?