Techman

What device can't the ISY communicate with? In the admin console under files, turn off the write updates to battery devices and see if the error message goes away. Do you have any red exclamation points showing on your device tree?

Trying clearing your java cache including all applications which will delete the finder from your desktop then download the ISY finder again. Reboot your computer before you download the finder,

try disabling the switch by pulling out the set button then. take a look at any programs that include the switch as they may have been modified when you upgraded your firmware causing the program to enter a loop. Also make sure that your firmware and UI are the same version.

Make sure your ISY firmware and UI are the same version If not, clear your Java cache, including all applications, down load the correct UI version for your ISY firmware

If you run the topography report you can then sort its address column making it easy to find the problem device. Especially helpful if you have a lot of devices.

Do a backup of your ISY so you'll have the correct link tables in the event you have to do a restore

Javi and jwagner010 Just tried the Fade/Stop with the ZRTSI and the shade stops at the MY position. Many thanks for the input

I use variables to let my programs know if the shades are open or closed. If one were to use fade stop does the somfy motor status in the ISY show as open or closed?

Were you using the ZRTSI or the URTSI? The ZRTSI communication with the Somfy motors is not bi-directional so the ISY and ZRTSI have no way of knowing the status or position of the shades.

If you turn on any of the other affected switches do all the lights turn on or is it only when you turn on the den switch. If it's only the den switch then I would factory reset that switch and see if that corrects the problem. Also reboot the ISY

I'm using the ZRTSI so the 50% option isn't an option as the ZRTSI won't recognize it.

How are you interfacing the URTSI II with the ISY as it only has inputs for RS232 and IR.

Your devices somehow became crosslinked. This can happen if several devices are in the linking mode at the same time.

The ZRTSI is a Zwave to RTS bridge. Being that the only way to control the shades from the ISY is Zwave using the ZRTSI a scene won't make a difference as the only two node options are on or off. It's possible that the Polisy with Wi-Fi may be a work around as the Somfy Mylink is a Wi-Fi to RTS bridge.

Another option is to run the Topology report. Tools | Generate Topology. The report will give you a list of all your devices along with their address and info on all your scenes. You're able to sort the columns in the report which can be quite helpful.

The ZRTSI and ISY only allows either open or closed and doesn't recognize "MY". Unfortunately there's no work around. As far as the ISY is concerned, either the Binary Switch Controller or the Class A Motor Ctr will operate the motors.

Is your UI also 5.3.4, if not you need to update it, in that case be sure to clear your java cache including all applications before downloading the new (5.3.4) Admin Launcher Are the Zwave devices that won't restore battery or A/C powered?

The link below will give you answers to most of your questions. When you update your password will go back to the default and your email configuration will revert to the default. It's best to export a copy of your programs as some will have to be modified. The latest version of the firmware is Zwave certified. It also contains bug fixes and enhancements.

Prior to seeing your post I tried using a different link for the launcher, for 5.0.8 or below, which got me into the (LAN) admin console. All is good, I'm up and running. Thank you.

I just replaced my SD card with a new 32Gb card. I cleared the java cache and downloaded the launcher but the admin console won't open. I then formatted the card using telnet but still am unable to open the admin console. The launcher show my firmware as 5.3.4 even though I haven't loaded anything onto the SD card. Any suggestions on how to open the admin console?

A 3rd party seller on Amazon has them for $59.99 Insteon I/O Linc, 2450 - Remote Control Plug-in Low Voltage Controller - Connected Home Modules - Amazon.com. It looks like they may have bought the Insteon closeouts and are trying to sell them at a premium. The seller is based in Oregon near where the new CEO of Smarthome lives.

This was on the Best Buy website. INSTEON - I/O Linc Contact Closure Interface - White Model:2822-292 SKU:4802085 This item is no longer available in new condition.

Seems that they're thinning out the product line to KPL's, Outlets, and wall switches. Currently there's nothing in the development stage other than the few items that they've partnered with Nokia on.

Glad to hear you're back in business.

The fact that they dropped the price from $79.99 to 49.99 leads me to believe that have added the IOLinc to their discontinued list. It's sad to see the direction that the Company is taking