Envirogreen

I'll have to check the UI version-travelling so won't be able to confirm till Saturday

I'm using 4.2.8 Anyone know if there is a defect in this beta or other ideas?

Here is the error I get when I put Toronto in and try to save (figured I'd try that since nothing was coming back with Find)

Still not getting anything back when entering in the Find Techman - did you change anything to make it work?

i bought this today when i click in find and enter toronto, nothing is found. i also tried new york and nothing came back again (not found) suggestions?

looks like there is an issue with the Elk getting an error when I try logging in (Your control is busy or unavailable). Need to get the guys that installed the Elk to address this, hopefully it fixes the ISY problem.

Hi, I have a water sensor which shows up as zone 38 in the Elk, but as you can see below - all other zones are here. I have disabled, enabled, rebooted, reconfigured and no change. Any suggestions? 1 1 Front Door Burglar Entry/Exit 1 1 2 Liv Win Right Burglar Perimeter Instant 1 3 Liv Win Left Burglar Perimeter Instant 1 4 Din Win Right Burglar Perimeter Instant 1 5 Din WIn Left Burglar Perimeter Instant 1 6 Kit Win Right Burglar Perimeter Instant 1 7 Kit Win Left Burglar Perimeter Instant 1 8 Fam Rm Win Burglar Perimeter Instant 1 9 Side Door Burglar Entry/Exit 1 1 10 L Bed Win Scr Burglar Perimeter Instant 1 11 Base Win Left Burglar Perimeter Instant 1 12 Patio Door Burglar Entry/Exit 1 1 13 MB Win Screen Burglar Perimeter Instant 1 14 R Bed Win Scrn Burglar Perimeter Instant 1 15 GB Liv Room Burglar Perimeter Instant 1 16 GB Din Room Burglar Perimeter Instant 1 17 2nd Flr Motion Burglar Interior 1 18 GB Fam Rm Burglar Perimeter Instant 1 19 Base Right GB Burglar Perimeter Instant 1 20 Base Left GB Burglar Perimeter Instant 1 21 Base Smoke Fire Alarm 1 22 CO2 Base Furn Carbon Monoxide 1 23 Rear Base Win R Burglar Perimeter Instant 1 24 Base Rear Win C Burglar Perimeter Instant 1 25 Kit Heat Fire Alarm 1 26 Co2 2nd Flr Carbon Monoxide 1 33 Laundry Burglar Perimeter Instant 1 34 Elec Window Burglar Perimeter Instant 1 35 Base Bath Win Burglar Perimeter Instant 1 36 Base Play Rm Win Burglar Perimeter Instant 1 37 Smoke 2nd Flr Fire Alarm 1 39 Side Window Scrn Burglar Perimeter Instant

thank you both. Seems like the port on the switch was having some issues, moved the cable from one port to the other, rebooted the ISY and everything is working again.

Hi, Hoping someone can tell me how to fix this. Jeff

is this starting to sound like a device that is failing? If that is the case, what are peoples experience with devices failing. Recently I had a number of lamplinc modules fail (less than a year old), but this would only be the second dimmer to fail in three-four years. That said, I was wondering if that sounds like a normal failure rate with Insteon? Thanks,

Brian H - buy test the load you mean test the electric load - if that is the question I don't think there is any issue as there are 2 other insteon switches right beside the one that is beeping and they have no issues apostolakisl - I've disabled all programs and it still beeps.

All of a sudden the dimmer started to beep and on/off ramping became really, really slow. Only fast on/off worked properly. Tried a reset (pulled out tab on bottom of dimmer, waited 10 sec, pushed and held till beeped) - No Change went in and did a device restore - the dimmer now worked the way it should - BUT - still beeps. Any ideas how I stop the beep? Thank you,

I'll do that next Re unplugging other electronics - I moved the isy and plm to another outlet with no other electronics plugged in. Plug is in a completely different room

Lee Was just doing what Michael k suggested (or at least my understanding of his comments) Anyway, restored a backup and restored devices Several devices got communication errors, so I'm back to the starting point We know the ups isn't an issue, we know moving to another outlet doesn't help...but no other progress Next steps?

tried to delete Modem and here is what I get

that's good info - I'll try an older back up. if that doesn't work could it make sense to remove all and start again?

No What does that do?

looks like 26 links - is that supposed to match up to the number of devices? If so it doesn't - I have over 40 devices

Done the palm restore No difference

Unplugged the UPS Moved the PLM and ISY to another room away from any other electronics. No change/improvement When open ISY - I don't get any errors I can turn on/off devices, but it doesn't recognize status of devices (just updates based on on/off directly in the browser) Rules don't work. Hops Left (I think that's the correct term) still low 1 and 0s. Next Step? Add access points? How many - two? Other alternatives?

Lee Been out of town on business Testing this weekend. Will pot result Thank you Jeff

Is this the right product for the filterlinc? http://www.aartech.ca/1626-10-smarthome ... ilter.html and is it okay for this to be plugged into the same plug as the PLM (PLM direct), UPS into the filterlinc Also - if I need an AP - I'm assuming this is the right one - http://www.aartech.ca/2443-smarthome-in ... upler.html How do I determine how many of these are required in the house?

so this may be a silly question. I have 30-40 insteon devices...almost all are dual band (2-3 are single band) - do a need access points. Right now the assumption is that there are enough insteon devices so that isn't required

okay so I'm seeing a number of of insteon devices with Hops Left = 0, the majority of the rest are =1, and only a couple are =2. for the UPS do I need to put a filter on it or can I address the issue by moving the ISY/PLM to another room from where the UPS is? Could that provide at least a test to confirm if the UPS is the problem? Alternative I assume is unplug the UPS and see if that fixes the issue.

lilyoyo Yes there is a UPS nearby. This has always been there from day one - and as mentioned for months everything worked fine. The only option to separating them would be to move the ISY/PLM to a completely different room in the house (its currently in the electric/structured media cabinet room)