Jimbo.Automates

Thanks @bpwwer , that explains it. Sent from my Pixel 6 Pro using Tapatalk

I finally got my eisy working and I see the same issue, this looks to be a network issue with eisy sending data to the local ELK python library which then sends the data to the ELK. I'm not sure what to do about this, will need to discuss with @Michel Kohanim The log below shows the NS sending the arm command to the library at 12:37:52 but that library doesn't receive/send the data to the elk until 20:38:09. 2023-01-07 20:37:52,945 Command udi_interface INFO Area:cmd_set_armed_status: area_1:Home: elk.arm(0,**** 2023-01-07 20:38:09,114 ELK-5703 elkm1_lib.connection DEBUG connection:write_msg: write_data '0Da010031960037' 2023-01-07 20:38:09,115 ELK-5703 elkm1_lib.connection DEBUG connection:_read_stream: got_data '16XK24252070701230100072' 2023-01-07 20:38:09,115 ELK-5703 udi_interface INFO Controller:callback: ELK Controller: cs={'real_time_clock': '2425207070123010'} 2023-01-07 20:38:09,115 ELK-5703 udi_interface INFO Controller:callback: real_time_clock=2425207070123010 2023-01-07 20:38:09,132 ELK-5703 elkm1_lib.connection DEBUG connection:_read_stream: got_data '1EAS2000000041111111000000000009' 2023-01-07 20:38:09,132 ELK-5703 udi_interface INFO Area:callback: area_1:Home: cs={'arm_up_state': <ArmUpState.FULLY_ARMED: '4'>} 2023-01-07 20:38:09,132 ELK-5703 udi_interface INFO Area:set_arm_up_state: area_1:Home: ArmUpState.FULLY_ARMED What I am not sure of, is does the 'write_msg' debug line print when it starts the write_msg, or when it completes. I'll look into that tomorro, and I will try pulling the NS out of the equation by just using the python library to send commands to the ELK.

Yeah, for sure I realize that when it was envisioned PG would be running on different machines talking to the ISY, but now that it can be on the same machine that makes sense. But mine was someone configured to an IP not valid on my LAN 192.168.1.127, I changed it to localhost, restarted and it's good now.

You mean all slots in the ISY admin console Node Server configurations? Sent from my Pixel 6 Pro using Tapatalk

Can't it use localhost instead of an IP address when it sees ISY and PG3 are on the same machine? I actually changed all mine to localhost per Michel when I reconfigured my network addresses a while back. Sent from my Pixel 6 Pro using Tapatalk

You can only create tickets using the web interface, sending to support email doesn't work anymore, or it hasn't worked for me for a while. Sent from my Pixel 6 Pro using Tapatalk

This can't be a random number, it needs to be a valid user code defined in your ELK system. Personally I create a specific user code for PG3 so I know who is arming/disarming the system.

Did you reinstall in same slot? If so, will need need help from @bpwwer for these error.

Please update to the latest PG3, reinstall in the same slot and try again. Sent from my SM-X808U using Tapatalk

Sorry I have no idea. My eisy had issues last weekend so I wasn't able to test. It's all good now so hopefully I have time this weekend to test. Sent from my SM-X808U using Tapatalk

Update to latest PG3 then reinstall in the existing slot should resolve this. Sent from my SM-X808U using Tapatalk

Update to latest PG3 should resolve this. Sent from my SM-X808U using Tapatalk

Sorry I have no idea. My eisy had issues last weekend so I wasn't able to test. It's all good now so hopefully I have time this weekend to test. Sent from my SM-X808U using Tapatalk

I just tried this and it worked fine to arm the system. However I don't use this method, I created a program for stay and away which arms when on and disarms when off. I've actually thought about just creating a node for each arm status so you can just add the node as a favorite. Sent from my SM-X808U using Tapatalk

I had issues bringing up my eisy last weekend so I wasn't able to try it out. Hopefully this weekend I will have free time, it's been a busy few weeks at work and home so I'm way behind around here. Sent from my SM-X808U using Tapatalk

Need help from @Michel Kohanim or @bpwwer Sent from my Pixel 6 Pro using Tapatalk

As I mentioned two posts above yours, this is currently not supported and I provided the links to the current discussions. Sent from my Pixel 6 Pro using Tapatalk

Makes sense, hopefully others using ELK outputs can chime in with their opinion. Sent from my Pixel 6 Pro using Tapatalk

No worries, that's why I apologized for the process not being fully explained. Sent from my Pixel 6 Pro using Tapatalk

Something else must be using port 8081? What other node servers or programs do you have running on your Polisy? You can change it to something else, like 8082 and restart the node server.

There should be a button that says reinstall in slot #. Where # is the current slot. If not, then you are on a pretty old version of PG3. Sent from my Pixel 6 Pro using Tapatalk

The nodes were deleted because you uninstalled the node server. That always deletes the nodes in PG3 and the ISY. Sent from my Pixel 6 Pro using Tapatalk

This is a bug in PG3 where it doesn't properly recognize a new version of a node server that was previously released with a very old version of PG3. But, do not delete and reinstall. You can reinstall in the same slot from the store or purchases page. Sent from my Pixel 6 Pro using Tapatalk

Yes, you will have to use the "Turn on For" inside UDI Mobile. But, if everyone using the ELK would like that to be the default On action, I could be convinced to change it or make it an option.

PG3 Airthings Consumer node server 1.0.1 released.