Jimbo.Automates

Update to latest PG3 then reinstall in the existing slot should resolve this. Sent from my SM-X808U using Tapatalk

Update to latest PG3 should resolve this. Sent from my SM-X808U using Tapatalk

Sorry I have no idea. My eisy had issues last weekend so I wasn't able to test. It's all good now so hopefully I have time this weekend to test. Sent from my SM-X808U using Tapatalk

I just tried this and it worked fine to arm the system. However I don't use this method, I created a program for stay and away which arms when on and disarms when off. I've actually thought about just creating a node for each arm status so you can just add the node as a favorite. Sent from my SM-X808U using Tapatalk

I had issues bringing up my eisy last weekend so I wasn't able to try it out. Hopefully this weekend I will have free time, it's been a busy few weeks at work and home so I'm way behind around here. Sent from my SM-X808U using Tapatalk

Need help from @Michel Kohanim or @bpwwer Sent from my Pixel 6 Pro using Tapatalk

As I mentioned two posts above yours, this is currently not supported and I provided the links to the current discussions. Sent from my Pixel 6 Pro using Tapatalk

Makes sense, hopefully others using ELK outputs can chime in with their opinion. Sent from my Pixel 6 Pro using Tapatalk

No worries, that's why I apologized for the process not being fully explained. Sent from my Pixel 6 Pro using Tapatalk

Something else must be using port 8081? What other node servers or programs do you have running on your Polisy? You can change it to something else, like 8082 and restart the node server.

There should be a button that says reinstall in slot #. Where # is the current slot. If not, then you are on a pretty old version of PG3. Sent from my Pixel 6 Pro using Tapatalk

The nodes were deleted because you uninstalled the node server. That always deletes the nodes in PG3 and the ISY. Sent from my Pixel 6 Pro using Tapatalk

This is a bug in PG3 where it doesn't properly recognize a new version of a node server that was previously released with a very old version of PG3. But, do not delete and reinstall. You can reinstall in the same slot from the store or purchases page. Sent from my Pixel 6 Pro using Tapatalk

Yes, you will have to use the "Turn on For" inside UDI Mobile. But, if everyone using the ELK would like that to be the default On action, I could be convinced to change it or make it an option.

PG3 Airthings Consumer node server 1.0.1 released.

Do not uninstall then install again, you can re-install in the same slot from the node server store, or by going to the purchases tab. Sorry Bob did not make that clear enough.

Version 1.0.1 released to force an upgrade of the udi_interface which was out of date on your system.

Are there any errors in the node server log? Sent from my Pixel 6 Pro using Tapatalk

Sorry, I see the exception now, missed that. I'll review your log and see if I can get it fixed tonight. Sent from my Pixel 6 Pro using Tapatalk

Sorry, you shouldn't have uninstalled, just reinstall in the same slot due to the pg3 issue. Do the nodes not show up in the ISY? Sent from my Pixel 6 Pro using Tapatalk

Fixed this and most other issues:

PG3 Airthings Consumer node server 1.2.6 See the README and Release Notes I've resolved all current issues that I plan to work on, or can fix are done. if you have an issue that is not listed please add it, or let me know.

@bpwwer Did you figure out if this was your fault? The log shows the name was added properly? 2022-12-01 08:58:20,380 Thread-11 udi_interface.interface INFO interface:addNode: Adding node wave 103(s_2930133779) [None] 2022-12-01 08:58:20,381 Thread-11 udi_interface.interface DEBUG interface:send: PUBLISHING {'addnode': [{'address': 's_2930133779', 'name': 'wave 103', 'nodeDefId': 'Sensor', 'primaryNode': 'controller', 'drivers': [{'driver': 'ST', 'value': 0, 'uom': 2}, {'driver': 'CLITEMP', 'value': 0, 'uom': 4}, {'driver': 'CLIHUM', 'value': 0, 'uom': 22}, {'driver': 'CO2LVL', 'value': 0, 'uom': 54}, {'driver': 'BARPRES', 'value': 0, 'uom': 56}, {'driver': 'GV1', 'value': 0, 'uom': 56}, {'driver': 'GV2', 'value': 0, 'uom': 56}, {'driver': 'GV3', 'value': 0, 'uom': 56}, {'driver': 'GV4', 'value': 0, 'uom': 56}, {'driver': 'VOCLVL', 'value': 0, 'uom': 96}, {'driver': 'BATLVL', 'value': 0, 'uom': 51}], 'hint': [0, 0, 0, 0], 'private': None}]} 2022-12-01 08:58:20,433 MQTT udi_interface.interface DEBUG interface:_message: QUEUING incoming message addnode 2022-12-01 08:58:20,435 Command udi_interface.interface DEBUG interface:_parseInput: DEQUEING addnode 2022-12-01 08:58:20,438 Thread-16 udi_interface DEBUG Sensor:handler_start: enter 2022-12-01 08:58:20,439 Command udi_interface.interface DEBUG interface:_handleResult: add node response: {'id': '7f8900b2-e0bb-4a1a-80ab-d6d0d5fa76da', 'uuid': '00:21:b9:02:55:cd', 'profileNum': 1, 'address': 's_2930133445', 'name': 'wave 202', 'nodeDefId': 'Sensor', 'nls': None, 'hint': '0x00000000', 'controller': 0, 'primaryNode': 'controller', 'private': None, 'isPrimary': 0, 'enabled': 1, 'timeAdded': 1662147489313, 'timeModified': 1669588388787, 'dbVersion': 1} 20

There was a long discussion here: https://forum.universal-devices.com/topic/38897-how-to-import-devices-into-elrp-using-a-node-server/#comment-350498 and the issue exists here: https://github.com/UniversalDevicesInc-PG3/udi-poly-ELK/issues/67 No direct resolution yet.

Sorry, after fixing permissions, guess I had a typo in my password...