Jimbo.Automates

I'm working on converting mine, but it's slow going, especially since I've been deep in the midst of converting PG2 kasa to use the newly released library which has been a lot more difficult to complete, and may need to push off those changes to PG3 version. Sent from my Pixel 6 Pro using Tapatalk

If system busy is constantly showing then it may be trying to write changes to wireless devices. Turn that off and see if it helps, also check the status to see exactly what it's doing to keep it busy. Sent from my Pixel 3 XL using Tapatalk

No worries, I was just giving you a hard time, no hard feelings from me. Sent from my Pixel 3 XL using Tapatalk

@Javi Just want to +1 adding back ability to see grouped nodes. Even if it's collapsed by default. But keep the node commands above it, previous release had node commands below so would occasionally have to scroll down a lot to see them. Sent from my Pixel 3 XL using Tapatalk

I've replied on the other thread about what to do about the Ecobee issues. And @Geddy assumptions are correct, PG3 will only be supported on Polisy, and PG2 nodeservers have to be updated to work on PG3, and most developers will likely eventually stop supporting the PG2 nodeservers.

Yes, if you use Polyglot and install both the ELK and Harmony nodeservers. Sent from my Pixel 3 XL using Tapatalk

Well, I know I'm not that active on forums lately, and deve of nodeservers has slowed all due to work and life, so I guess that excluded me [emoji16] Sent from my Pixel 3 XL using Tapatalk

Not sure about the -b option, must not have the latest Netcat available on Polisy? Hopefully @Michel Kohanim can help with that. This works for me, but have to cntl-c it to get out: nc -u 192.168.86.255 50223

I think it may be an issue that freebsd doesn't allow that as the broadcast address. I had this issue in a nodeserver when moving to Polisy, I'll look it up in the morning when I have time. Sent from my Pixel 3 XL using Tapatalk

Right, what I really meant is should I move my current PLM over and use with Polisy or get a new USB one? I guess either way I need them eventually so may as well get them. Sent from my Pixel 3 XL using Tapatalk

So is it recommended to move to USB PLM for ISY on Polisy? My current PLMs are likely near end of life so was going to buy new ones with current sale so could just get USB ones in preparation for the move? Sent from my Pixel 3 XL using Tapatalk

Nothing needs to be changed for the HE nodeserver after changing the port, I changed mine and everything still worked after a minute or so. The users, like Harmony Hub send out broadcasts and NS responds telling it what port it's using.

The latest version of the HueEmulator allows changing the port number, just for this reason. Previous versions allowed you to set it, but it didn't actually work.

Now if we could get the program name many of us would be very happy

Sorry again, the lag issue is still there 0.83. Opened favorite with widget and couldn't select any folder for many seconds. Sent from my Pixel 3 XL using Tapatalk

Sorry, I wasn't on 0.83 yet, so far the lag issue seems fixed after updating this morning. Sent from my Pixel 3 XL using Tapatalk

That's awesome! [emoji16] Sent from my Pixel 3 XL using Tapatalk

There is no spinning progress indicator. I notice it mostly with an ELK Nodeserver node when arming and disarming. But I will try other nodes and see. Sent from my Pixel 3 XL using Tapatalk

With 0.83 Running a program from favorites command works great, thank you! When I initially opened after updating to 0.83 I was able to immediately select a node, but then backed out and tried to select again and it took many seconds before it worked. Now I tried it again and used widget to open favorites, clicked on a folder and it worked right away, but couldn't select a folder at that level for many seconds. Also, when opened the app, select a node and change it's status, the status doesn't change even after waiting many seconds, then I back out and the status on the icon is correct. We discussed this a while back and it seemed to have been improved, but now it's happening again. Still loving that app and the progress!

Yes, Javi mentioned it's related to having an older slower phone, now that my warranty is expired hopefully I'll like the Pixel 6 Pro when it's available later this year... Sent from my Pixel 3 XL using Tapatalk

Looks like this specific issue was listed in the fixes, thanks!

Was really hoping this was in the Favorites Command. One button to execute the if of a program.

I have this same issue on my Pixel 3XL where it doesn't respond to touching for many seconds, then start working. I was about to report a bug with adding to Favorites down inside a folder 2 levels deep would always add them to the folder above, and would have to back out to the top then come back in to actually see them. I'll test with latest 0.82 when it's available to me.

Thanks, I don't use Mobilinc, but I find all my 5012 errors are coming from HueEmulator nodeserver which uses PyISY, and all others seem to be UDMobile loosing connections. But, not sure why the connections are getting lost.

Did you figure this out? I've just started having issues with subscribers loosing connections, UDMobile, and lots of -5012 errors in my error log. Sent from my Google Pixel Slate using Tapatalk