stevehoyt

@shbatm Done and added to issues report on your GitHub.

@photogeek54 Hi I am currently running prerelease 0.2.05. I see in the non production store that 0.2.061 is available. I have tried restarting the node server, reinstalling it, and restarting PG3. Regardless, the new version does not start. Should I stay at the version I am running or is there something else I need to do to update it. Thanks Steve

@asbril Yes I have and am using it. Thanks I have added the nodeserver version, as I promised to do testing for the solar edge node server developer. Also I am investigating the differences in info provided by the 2.

@shbatm Just to make sure it wasn't an update issue.... I just upgraded PG3 to the latest version. Here is where I am at and a new log file showing errors at the current level. Steve @photogeek54 FYI For some reason I can't get the non production version of solar edge to update...still working on that home-assistant_2023-06-05T17-58-26.519Z.log

Hi Again @shbatm I just tried to install the beta and got a message saying " failed to setup" I have attached the log file. Can you take a look at it and see if it gives you any info as to the failure. Thanks Steve home-assistant_2023-06-05T16-12-00.670Z.log

Thanks I will give it a try. Steve

@shbatm @photogeek54 I have recently added the Solaredge nodeserver to my PG3 running on polisy. I need some help understanding what I should see and/or how to use the data in HA. As an example in my Admin console I see the info in the screen capture below for Energy last 15 min. i.e. production, consumption, purchased, self consumption, feed in and since last update. When I look at the data in HA for this node, I have a sensor entity id called "sensor.energy_last_15min". So far so good. Upon further inspection under attributes, I see custom control 0 -4 which has the rest of the data. So here is my problem/question(s). I have no idea what each custom control represents, but I can figure it out by comparing what I see in the admin console to the values for the custom control. 1) Assuming that is the intended way things should work, does that mean I need to use YAML in my cards to get at that info. So far I am just slugging my way into YAML by uneducated copying of stuff. I have got a few things to work but only by luck. 2) Is it unreasonable given this architecture to be able to have these custom controls broken out into specific attributes with a representative name. Thanks for any help. I am running the latest HA and version v 02.05 for solar edge. I have not yet got the latest version 0.2.061 to update. Still working on that.

Thanks to everyone. It only lasted for 2 days. Now everything has returned to normal.

@photogeek54here's a snapshot of what I am seeing FYI

@Javi Thanks for your comments. This only started since I installed and began running the non production version of the solar edge nodeserver. I am running it to do testing for @photogeek54 . So are you saying I should reboot the nodeserver? I am running PG3 nodservers on a polisy. Or should I reboot the PG3 server or entire Polisy. Thanks Steve

@photogeek54 I am getting an error when starting the Admin console "already subscribed". I saw it once yesterday, but was able to get the console started and populated with values. I am getting it today and can get the console to start, but there are no values for anything i.e all node servers etc. The solar edge nodeserver is up and running correctly. It is passing data to HA via that udi to HA integration written by @shbatm I have included the error log from the admin console below. As this is preproduction let me know how you want me to proceed. i.e delete solar edge nodeserver and retry, submit to UDI, try something else...... Steve ISY Error Log.v5.5.9__Fri 2023.05.26 06.55.27 AM.txt

@photogeek54 Got it up and running with no problem. So far all values are populating. I will let you know any thoughts after watching it for a few days.

did you look in the MyQ history in the app. Sometimes there is additional info there as to where the command came from.

Thanks for checking. If there is anything you need from me to help, let me know

Hi @bpwwer I think your question points out the problem. I don't think the nodeserver is seeing the sensors (and some other available info). I have included a debug log file which shows what it is seeing. Some items are obvious some are not to me. I have included 2 screen shots of all the variables that I see looking at my weatherlink. Note the list on the right side of the screen shots. In addition I went to the Davis website and got info on retrieving the airlink info via an API. It looks like they have opened up a lot more info now. I don't know anything about api's hopefully that might mean something to you. here is the link. Thanks https://weatherlink.github.io/airlink-local-api/ WeatherLink_5-15-2023_84731_AM.zip

@bpwwer Good Morning Just wondering if you had an thoughts on my initial post? Thanks Steve

Thanks everyone for your comments. I'm still learning HA. I think I get this part now. I believe my confusion was due to the lack of knowing how integrations worked vs HACS. Thanks again

@kzboray Thanks...I was able to see the HA version as you show and I am running that. @vbPhil Yes I did know about the dev version and am nowhere near capable of doing what it takes to get it running. I had seen that it was targeted for release around now, hence my question. It seems that there is no way to check which version of the integration I am running versus the current release other than the lack of seeing an update in HACS. Does anyone think it might be nice to add this?

I am running HA and a polisy running ISY and node servers. I thought I read that a new version of the HA isy integration was in the works around this time frame. I have not seen any updates come via HA. I have looked around in Hacs HA and GitHub but can't seem to find out if I am running the latest version. So can someone steer me to where I can see the current version I am running of the integration for HA, and how I determine if it is the latest. Thanks Steve

@photogeek54 I have a solar system with 2 inverters and 2 batteries. I would be willing to test it if you like. I will be out of town all next week but could try it the week after that.

if you google it you can get the manual. Here is the link. http://cache.insteon.com/documentation/2732-xx2-en.pdf here is wiring info CAUTIONS AND WARNINGS Read and understand these instructions before installing and retain them for future reference. IMPORTANT: HOW DO I KNOW THIS WILL WORK WITH MY SYSTEM? 1) Your existing HVAC can operate 2 stages of Heat and Cool. 2) Your existing thermostat operates on 24V. 3) Your system is not a 120/240V electric radiant heater. 4) Your existing thermostat is not millivolt controlled. 5) Your existing thermostat has 5 or more wires connected. Insteon Thermostat is designed to operate on a minimum 5-wire, 24V HVAC unit. If you have only 4 wires you can purchase the “Add-A-Wire” adapter item #304AAW from www.smarthome.com. If you have a conventional heating and cooling system, use Insteon Wired Thermostat 2441TH If you have a heat pump heating and cooling system, use Insteon Wired Thermostat for Heat Pumps 2732-242 Note: Installation should be performed only by a qualified HVAC Technician or a homeowner who is familiar and comfortable with electrical circuitry. If you have any questions regarding installation, consult an HVAC Technician or call the Insteon Support Line at 800-762-7845.

If it is sensors you need, I am using yolink sensors to monitor pool ingoing and outgoing temp, along with the pool water level. It requires a hub and nodeserver like CAO. I Tried CAO, but my pool was too far away from the hub.

@vbPhil could you point me to an explanation of the "magic" i don't have any z wave devices but am running into the same issue you mention

I thought I would publish a practical use for the Rainmachine @glarsen and Flume @Jimbo.Automates PG3 node servers . I started this project about a year ago and thanks to the help of the 2 above developers, making some changes for it, it has been running fine for many months. It takes the expected usage for each irrigation circuit ( from Rainmachine info ) and compares it to the actual usage ( from Flume ). If an excess water situation is detected, i.e. a malfunction in a circuit, an alert message is sent to me so I can fix the problem. All this is done via the ISY running on a polisy and the 2 PG3 node servers. This has been invaluable during our drought conditions. I recently added Home Assistant to my house. I use it for display purposes only. All control, warnings etc is still in the ISY / node servers. I did however create a visual interface so HA lets me know what is going on. I have attached 2 pictures below of it. The first shows usage vs expected for the last 4 days. The second shows it for the last run of the circuit. The purpose of this post is to let both developers know their work is of value and let other PG3 users see a practical application. I will post in both Rainmachine and Flume PG3 areas Steve

I thought I would publish a practical use for the Rainmachine @glarsen and Flume @Jimbo.Automates PG3 node servers . I started this project about a year ago and thanks to the help of the 2 above developers, making some changes for it, it has been running fine for many months. It takes the expected usage for each irrigation circuit ( from Rainmachine info ) and compares it to the actual usage ( from Flume ). If an excess water situation is detected, i.e. a malfunction in a circuit, an alert message is sent to me so I can fix the problem. All this is done via the ISY running on a polisy and the 2 PG3 node servers. This has been invaluable during our drought conditions. I recently added Home Assistant to my house. I use it for display purposes only. All control, warnings etc is still in the ISY / node servers. I did however create a visual interface so HA lets me know what is going on. I have attached 2 pictures below of it. The first shows usage vs expected for the last 4 days. The second shows it for the last run of the circuit. The purpose of this post is to let both developers know their work is of value and let other PG3 users see a practical application. I will post in both Rainmachine and Flume PG3 areas Steve