jwagner010

So what do we do if a Node Server we paid for doesn't work and there is no (obvious) way to contact the developer? Not sure how to even contact the DysonPureCool Node Server owner (Gordon Larsen)? Is he on this forum? Right now it doesn't install. @Michel Kohanim

I don't get that option:

So finally got around to installing PG3. I installed one of the free node servers no problem. Then linked PG3 to my portal account and purchased the DysonPureCool node server. So far so good. Went to install it but it will not install (I did purchase it and $10 hit my credit card), so I know that piece worked. This is what the log says. Doesnt mean anything to me. Thoughts on how I get to install this Node Server? PS. there wasn't a PG3 DysonPureCool Node Server Forum topic so posting here. Any help appreciated. 2/14/2022, 13:02:11 [pg3] info: [00:21:b9:02:50:a1_9] :: Creating Nodeserver 'DysonPureCool' 2/14/2022, 13:02:11 [pg3] warn: [00:21:b9:02:50:a1-9] :: NodeServer folder exists, removing... /var/polyglot/.pg3/ns/00:21:b9:02:50:a1_9 2/14/2022, 13:02:14 [pg3] error: unhandledRejection REPORT THIS!: Error: Request failed with status code 404 at createError (/var/polyglot/node_modules/axios/lib/core/createError.js:16:15) at settle (/var/polyglot/node_modules/axios/lib/core/settle.js:17:12) at RedirectableRequest.handleResponse (/var/polyglot/node_modules/axios/lib/adapters/http.js:231:9) at RedirectableRequest.emit (node:events:365:28) at RedirectableRequest._processResponse (/var/polyglot/node_modules/follow-redirects/index.js:399:10) at ClientRequest.RedirectableRequest._onNativeResponse (/var/polyglot/node_modules/follow-redirects/index.js:57:10) at Object.onceWrapper (node:events:472:26) at ClientRequest.emit (node:events:365:28) at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:621:27) at HTTPParser.parserOnHeadersComplete (node:_http_common:127:17) at TLSSocket.socketOnData (node:_http_client:487:22) at TLSSocket.emit (node:events:365:28) at addChunk (node:internal/streams/readable:314:12) at readableAddChunk (node:internal/streams/readable:289:9) at TLSSocket.Readable.push (node:internal/streams/readable:228:10) at TLSWrap.onStreamRead (node:internal/stream_base_commons:190:23) 2/14/2022, 13:02:24 [pg3] debug: Sending logfile to frontend :: /var/polyglot/.pg3/logs/pg3-current.log 2/14/2022, 13:02:26 [pg3] debug: Client pg3frontend_glDkc subscribed to udi/pg3/frontend/clients/7d79c39d-8386-425e-a22a-c325e2c5c0ea/log/main 2/14/2022, 13:02:26 [pg3] debug: Starting log stream for pg3frontend_glDkc :: /var/polyglot/.pg3/logs/pg3-current.log 2/14/2022, 13:02:40 [pg3] debug: Downloading logfile :: /var/polyglot/.pg3/logs/pg3-current.log

Probably a silly question but I installed PG3 and access it via port 3000 dashboard. All fine. How do I change the PG3 default ID and password. Not a fan leaving it with defaults.

Just purchased a serial PLM today on the Smarthome website. Lets see if the order gets fulfilled, but it let me buy it, didn't say 'Sold Out'.

Uninstalled app, rebooted device, rebooted ISY, reinstalled app and tried to re-sync. The sync still has same issue just sits there with spinning wheel at this stage indefinitely

Running the latest version of UD Mobile on IOS. Cannot sync, during the sync it just sits at "Getting NLS Objects for Family: 10. Instance: 3" with a spinning wheel. Just sits there with spinning wheel, no error messages. No idea how to fix it. Was working fine for months before the latest upgrade to UD Mobile. Running 5.3.3 on the ISY.

I was lucky I needed it for a haiku ceiling fan with a 0-10v driver module that “sinks or sources” voltage, so I was good either way. As I mentioned, I went with the Insteon device, but if it breaks and is no longer available I will just get the Leviton as my backup plan behind a z-wave 120v dimmer switch. There was a pe300-Dow on e-bay for $70 earlier this week which would lessen the blow to the hip pocket for you.

Before I installed my Insteon ballast solution a couple years back I was thinking about a leviton pe300-Dow behind a z-wave dimmer switch. Figured it would be simpler once set up to control. Not sure if others have experience with one of these? ps not a cheap option.

Shows 0%

I have ZRTSI (z-wave version). Fade Stop command to it is just like hitting the My button on the Remote I believe. But works

Tried mine with a Rest. A DON of 0 closed them, and a DON of 1 or higher just opened them, including 25, 50 and 99. Tried 1, 25, 50 and 99, no luck. From reviewing the forum, I found that a 'Fade Stop' from the ISY will result in the shade motor going to the 'my' position. Can confirm it works, by using UD Mobile I issued a Fade Stop command to the Shade motor and it resulted in the shade going to the 'My' position setting. Hope that helps

Not sure what that has to do with my suggestion and use case?

In some instances I use Programs to turn on devices as I require the program to do a number of 'checks' before turning on the device. When adding a Program to the favorites dashboard it would be nice if we could show the status of the device that the program is turning on or off next to the Program itself. For example, if I have a program called 'Ceiling Fan' and add that program to the favorites dashboard, when setting up the Program called 'Ceiling Fan' as a favorite it would be nice to be able to select the device to show as status on or off against that program on the favorites screen. I know I could just put the Device itself under the program as a favorite, but given I don't want to turn the device on unless the program does the checks I would prefer not to have the device itself on the favorites screen. Not sure if others have a need for something like this, and I am sure it would be low on the priority list but wanted to put it out there for consideration. That and geo fence would be awesome !!!! @Javi Appreciate the time on this app, finally something that works with node servers, awesome job.

Really liking UD Mobile on iOS. Great job. On iOS will UD Mobile support GEO fences? It is the only thing keeping me running mobilinc which I would like to do away with completely if I could. Thank you keep up the awesome work.

Thanks for the suggestions. I have a Aeotec Multi Sensor 6 kicking around, while I hate to use it for this purpose, appears there are not similar z-wave devices per OP, so will look to try the Aeotec this weekend if time permits

I have a scene that includes a homeseer dimmer switch (HS-WD200+) and a homeseer switch (HS-WS200+). The HS-WD200+ is the controller and the HS-WS200+ is a responder. If both devices are on / scene on, when I press the paddle to turn the HS-WD200+ off, the HS-WS200+ turns off - expected behavior If both devices are off / scene off, when I press the paddle to turn the HS-WD200+ on, the HS-WS200+ doesn't respond / stays off - Any thoughts what's going on? Cannot figure it out. The ISY 'sees' both the On and Off paddle presses of the HS-WD200+ but the HS-WS200+ just doesnt respond to it. Is my HS-WS200+ and I should just replace it? I can control the scene on/off and devices directly from the ISY Console with no issue, but local on taps don't trigger the scene / HS-WS200+ on. Do I just need to replace the HS-WS200+?

I am looking for a z-wave vibration sensor, one which is battery powered and 'relatively' small. I know there are multi-sensors out there but really prefer a single purpose vibration sensor device. Similar to this one, which would be perfect for my needs but unfortunately its zigbee: https://www.aqara.com/us/vibration_sensor.html Interested if folks have seen something like this on the market for z-wave? Just FYI before someone asks, I have a range hood that I would like to detect when it is operating. Long story but I cannot get to the wiring (would evolve busting out drywall which I just don't want to deal with). A vibration sensor like this should work well.

Appreciate the counsel. Figured I would need to look for a cheap laptop, kind of sucks but I cannot complain I guess, the ISY has been great value for money over a decade. The good news for everyone else is, knowing my luck, as soon as I buy the laptop the non Java version will be released the next day !!!!!!!

I shudder to ask the question and I pretty much know what the answer will be 'it will be available when its released', but I will ask anyway !! I access the Admin Console through my employer laptop (windows 10) and have done so successfully for over 10 years. Unfortunately, my employer has decided that it will no longer support Java and is actively removing it from all machines across the company. They have their reasons with the changes to the way Oracle now licenses Java to large enterprises. I cannot fight city hall on that one, is what it is. My predicament is I don't have a personal laptop. So to my question. I hear that UDI is working on a non Java based Admin Console interface. I will not ask exactly when it is likely to launch, but would ask if it is highly likely to launch in 2021 even if in December? I can probably limp along to the end of the year, and hope no changes to programs or adding / removing devices is needed. Just trying to gauge the general timing here as buying a laptop/desktop is an expensive proposition for me to access a user interface as the ISY Admin Console is the only thing I cannot do from my employer provided laptop so I would really just be buying a laptop to access the ISY (ps I also have a POLISY) Long question but wanted to add some color as I know UDI is a small shop and I am sure going as quickly as possible.

Not a solution today but perhaps a node server could be written to connect multiple ISYs together. Polling interval could be set to appropriate level or program(s) written to query the NS on certain control triggers if real time status is important. Beyond my capabilities but maybe something UDI or someone with knowledge and time wants to consider.

Anyone have any ideas or a guess when we might see this new 4 button key pad?

I see how to get to the feature, that’s very clear, but that wasn’t the question. The question is what does it do?

@Chris JahnI too would be interested to understand exactly what this is. Is there documentation describing what this actual is / does? Much thanks. “Optional Basic and Button Press/Sensor Detection nodes for Z-Wave devices (See Z-Wave node level menu in the Admin Console)”

Looking for some opinions and recommendations. I currently have an all Insteon installation, switchlines, outletlincs, motion detectors, thermostats, leak sensors, etc, with close to 50 devices in total. Have been happy with my installation overall and in particular extremely happy with my ISY, the brains of the system which I have been able to integrate with pretty much anything using the network module. I am about to go through a major renovation and will be looking to move to zWave, although I have been happy with Insteon, the All On and All Off is a deal breaker for me, plus the limited evolution/choices of the Insteon devices. I do plan to stay with the ISY and will upgrade to version 5 of the software. To my question, one of the things I really like about my Insteon thermostats (Venstars with the plugin Insteon dongle) is that they push any temperate and humidity changes back to the ISY real-time, in addition to any manual status/mode changes. I use changes in temperate to trigger other events, fans, etc and so having the ISY see temperate and mode changes real time with the thermostat pushing the information is important to my set up (I do not want to be constantly polling the thermostats). I am not familiar with the various zWAve based thermostats so looking for recommendations of zWave thermostats that do push this information automatically back to the ISY controller. PS. I live in an apartment with Water Source Heat Pumps.