Waketech

Sure, Venmar EA 1500 http://www.venmar.ca/37-air-exchangers-ea-1500.html , there is reference to the controller in the manual

All, So I finally installed an air exchanger in my garage (due to high humidty problems) and I am looking to automate. My initial though was to use the relays to control different functions however the controller does not seem to operate the device (open/close connections like a relay). I used an ohm meter to test the 4 connection pins at the controller and no matter what position I select there is not short/open based on switch position. I have tried calling the manufacture but as you can imagine they were no help. The main issue is that the device needs manual intervention (on / low / high / re-cir, I could just power the unit on/off with a controlled plug however I think this would wreck the device >. Any thoughts ?

Ok it is now working normally

Ok so I unplugged the ISY, plugged it back in and I now have the IP via FING

So if the router changed, what steps do I need to take to get the ISY IP's changed

Perfect, the router was changed as well

All, I changed from Shaw to Telus and as figured the admin console, notifications, etc do not work. How do I go about getting the admin console running again so I can get things back to normal ?. TIA

A+ for you, thanks you save me tons of searching time...

All, My PLM died, I replaced it as per the wiki article and everything went ok, However I now have two switches that "Cannot communicate with "name" (address)". please check connection" There is also a red exclamation point, any ideas on how to fix ? Thanks

Will buy portal as soon as this works as well

I was trying to do some trending of various things and I saw that data from the weather module was not available on the ISY log, is there a way to get logged data from the weather module ?

Yes, I have one that has been working fine for over a year and I just got another one (159.99 at Home Depot until Dec 2, if you are in Canada)

Home Depot in Alberta has the fancy Schlage touch pad deadbolts on for 159.99 reg 229 sale is on until December 2

All, Although limited in selection, here is a sale that is going on.. http://www.memoryexpress.com/Search/Products?Search=insteon

I emailed arrtech and they said they do not carry the t7900, off to eBay I guess

I see you are in Canada, where did you get yours from ?

Techman, I just found that, thank you io_guy By control can I set programs in the ISY to control the TSTAT, i assume yes. What do you mean when you say additional functionality ?.

Also do I need to buy the adapter or just the T7900 ?

Perfect, so no cloud ? and controllable through the ISY via network module ?. Now to learn how to use the network module.

All, Anyone ever heard of these or use these. I am in search of a thermostat that is able do do everything I need (mainly have humidity control and external sensors) and be non cloud based as I cannot seem to find any insteon and or zwave options. Oh and will this work with the network module ? http://www.networkthermostat.com/products/wi-fi-thermostats

Solved, problem seemed to correct itself after upgrading to 4.2.30

Disregard, I figured out to go through the web browser, the first time I forgot to enter the port number, now it works

I cleared my cache prior to upgrading to 4.2.30, how do I get my 4.2.18 back to complete the upgrade >

Ok just did that as well, he is another stumper that I currently have. My remote access used to work now it does not. The ports are still forwarded and open when I just checked, however when I get to the ISY screen it never allow me to log in (it just says Load Config and above it it says timeout, loading: /config/) any suggestions ?

Ok, I think I got it, not sure why the exclusion ever got removed from Kaspersky, this link also helped... http://forum.universal-devices.com/topic/4058-kaspersky-2010-exclusions/