G W

I put everything in a scene even if it's a single light and switch. S.A.T.T.P. Best regards, Gary Funk

You should be using scenes for everything. S.A.T.T.P. Best regards, Gary Funk

How many homes have a water suppression system? And whom still uses Halon? S.A.T.T.P. Best regards, Gary Funk

My fire suppression isn't water. S.A.T.T.P. Best regards, Gary Funk

If you control the device from a scene and add the device and the KPL to the scene the KPL will be updated. You can control the scene from a program and the KPL will stay accurate. S.A.T.T.P. Best regards, Gary Funk

That's exactly what a KPL does. You have something configured wrong. S.A.T.T.P. Best regards, Gary Funk

If you have an Elk and price does not metter get the Elk. Otherwise get the Select. S.A.T.T.P. Best regards, Gary Funk

On the KPL how do you have the button configured and how do you want the button to act? S.A.T.T.P. Best regards, Gary Funk

It does do that if you add everything to a scene and you control the scene. S.A.T.T.P. Best regards, Gary Funk

What you are doing with programs does solve the issue with the remote not getting updates when it sleeps. Best regards, Gary Funk

I just finished running mine through 250 cycles and it's perfect. I opened up the unit and the manual indicator is gear driven so I see no reason it will not indicate correctly. S.A.T.T.P. Best regards, Gary Funk

That's the toggle mode. But if the remote truned it on it will remember it is on so if something else turns it off, the remote will think it is still on and issue an off command on the first push. S.A.T.T.P. Best regards, Gary Funk

What exactly are you trying to do? S.A.T.T.P. Best regards, Gary Funk

Yes it is. Best regards, Gary Funk

If you have concerns DON'T use it. No one is going to force you to use the feature. S.A.T.T.P. Best regards, Gary Funk

Black is negative. You apply positive to red and green to open and close the valve. Everything one needs to know is on the SmartHome website. S.A.T.T.P. Best regards, Gary Funk

Since it's the data between the UDI ISY and the UDI Portal, UDI can do what's best to transfer the data. S.A.T.T.P. Best regards, Gary Funk

First of all, get rid of XML. Go to binary between the ISY and the Portal. UDI controls both ends so UDI can solve all of this. AND if bandwidth is an issue DON'T use the portal. S.A.T.T.P. Best regards, Gary Funk

I'd just like to point out that bandwidth should not be a problem. Each even only need send a few bytes to the portal. The portal should know what the data means. Best regards, Gary Funk

The nice thing about the units in the second link is they can be used both ways. Best regards, Gary Funk

I will use the Elk. However you could use an appliance linc to power a 12 volt power supply. Best regards, Gary Funk

The second link will to the same thing. It just depends on where you place it. I will mount the magnetic plate on the door and the magnet on the wall to keep the door open. Best regards, Gary Funk

These are NOT magnetic locks. There are magnetic door releases. They hold the door open and release the door on power loss. They are used to let fire doors close when a fire alarm is activated. Best regards, Gary Funk

So I guess no one here has used magnetic door releases or knows of any. Such a shame this forum is CRUMBling. Best regards, Gary Funk

No. It's not relevant to your question. The devices I ordered have shipped. I'll let you know if they are good. S.A.T.T.P. Best regards, Gary Funk