dbuss

I have two ISYs at two different locations. I wanted to keep them separate so they both have their own ISY portal. We use Amazon Echos, so I have separate Amazon accounts for both. Agave and MobiLinc both support mutiple accounts. So each location has its own account in each. Sent from my XT1650 using Tapatalk

Fire TV doesn't support locks either. Sent from my XT1650 using Tapatalk

If you have just one Echo device, have you tried resetting it? Sent from my XT1650 using Tapatalk

After adding your lock to the Isy portal did you ask Alexa to discover devices? The questions you are asking are correct and Alexa should respond with the answer.

Stu, I appreciate your assistance as always. I have determined that the black wire in the box with three wires is connected to the line and is connected to the black screw. That would make the white and red wires travelers. To get a neutral in the box with three wires I will connect the white traveler wire to the neutral bundle in the other box. Is this correct? Update: Task successfully completed. Thanks Stu and Scott for your assistance. It's greatly appreciated!! Sent from my XT1650 using Tapatalk

If I re-attach the red wire just disconnected and then disconnect the red wire on the other switch, I can turn the light on off with the switch I just disconnected the red from. But not the other switch. I think this is to be expected.

If I remove the red wire form the switch in the first picture that has line wire being black, I cannot turn the light on. However, I can turn the light on with the other switch.

I wired the switches again. When both switches are off the black wire on the switch in the first picture has power just as indicated. The white wire on the other switch has power with both switches off.

I did not try that. But I could.

The Insteon switch that you see is for another light and it does work fine. It's not in a 3-way circuit. It get's its line power from same line bundle as described above.

The black is the 120 volt line in this box. This box has three 3-way switches that are all connected the same way. Three cables come into the box. Each with a black, re, and white wire connected to a switch. It seems to me that the black line wire in this box is the same black wire below. Cable 2 Red - Switch White - switch Black - Line Bundle

This is the other box. Sent from my XT1650 using Tapatalk

I disconnected all the wires from the two switches and the only one that had power was that black wire as indicated. Sent from my XT1650 using Tapatalk

This is the box where the line connection is made to the switch. Sent from my XT1650 using Tapatalk Yes. Sent from my XT1650 using Tapatalk

This is the switch that has the line connection. Sent from my XT1650 using Tapatalk This is the other switch. Sent from my XT1650 using Tapatalk

Switch 1 box has one cable running into it with red, black and white wires. All three wires are connected to the switch. The black wire is connected to the black screw. The switch 2 box has two cables coming into it. Each cable has red, black and white wires. On one cable, the black goes to the black crew on the switch. Red goes to line bundle and white goes to neutral bundle. The red and black cables on the second cable are attached to the switch and the black goes to the line bundle. Thanks Stu!!

I need some help wiring new switches in the following 3-way circuit. Switch 1 is connected to line with the black wire. The switch also has a white and red wires from the same cable as the black wire connected to it. Here's the wires in the switch 2 box where they are connected. Cable 1 Black - switch Red - Line Bundle White Neutral bundle Cable 2 Red - Switch White - switch Black - Line Bundle Thank you.

Try adding next day to your 7:00 AM Time. ​I use another program for settings the rest of the day also.

Here's the solution to my similar problem. http://forum.universal-devices.com/topic/22340-amazon-echo-not-discovering-devices/

Michel & Stu, I discovered the problem. When I went to unlink the Amazon​ account from the Isy portal, I discovered in my profile that I was not linked to any Amazon account!! Once I linked the Amazon account all is good. Thank you very much!! Sent from my XT1650 using Tapatalk

Stu, the attached screenshots I believe answer your questions. Also, if I ask Alexa verbally to discover devices she says this will take about 20 seconds......and when finished she says no devices found. Sent from my XT1650 using Tapatalk Ok

I've installed both Stu. Sent from my XT1650 using Tapatalk

I added the ISY skill and am able to control devices with this. However, Alexa still is unable to discover devices. ISY for Smart Home and the ISY skill are linked to the same Amazon account. Any ideas? Sent from my XT1650 using Tapatalk

Yes I did.