dbuss

The first thing you should do is get your Ui the same version as your firmware.

Yes, I have two Z-wave thermostats on the same ISY controlling two different furnaces and air conditioners.

I have a 2gig CT100 Z-Wave thermostat and an RCS TZ45 Z-Wave thermostat. Both have worked well.

This is impressive!! I live in WI and presently on a business trip on Long Island. The setup was completed with my phone here on Long Island. I called my wife and had her try it out and it worked flawlessly. Congratulations on a job well done. Sent from my XT1254 using Tapatalk

Stu, Have you tried "Alexa, ask Izzy to turn off dining room" or replace "turn" with "switch"?

You could also try changing the one word description. "Kitchen" does work on my Echo. Sent from my XT1254 using Tapatalk

Are you saying, "Alexa, tell Izzy to turn on kitchen? Sent from my XT1254 using Tapatalk

If you use one word names for your devices, you will have much better results. Sent from my XT1254 using Tapatalk

Hi Michel, I'm connecting locally.

My admin console is very slow to update the status of the devices today. I can send commands through the admin console and they are executed as normal. However, it takes quite some time for the status of the device(s) in that command to update. The devices seem to update as usual when I access my ISY through the UDI Portal. Also when I sign out of the admin console it takes awhile for me to be able to sign back in because the admin console thinks I'm still signed in. This does not happen when I connect through the UDI Portal. Echo is also performing as normal. I am also unable to get the status of my devices on Mobilinc today.

If you had the UDI portal you could also install MobiLinc on a tablet and that would give your guests control of the devices without the ability to change programs, scenes, etc. in your ISY.

David, I didn't have to delete the Mobilinc portal. If my memory serves me correctly, that happened when I registered the UDI portal. What happens when you click on this link ISY Portal

I've found that entering one word spoken works best for me. Reliability is very poor if I add more than one spoken word. As Jon, said it will get better. There's already been improvements and I have full confidence that UDI will be working to make it better. Like everyone else, I'm anxious to see the improvements, but at the same time it's fun and interesting being able to take part in the development of this feature.

Larry & Stu, it works perfectly!! Thank you very much!!

I've learned that from the other 3-way and 4-way circuits that are Insteon controlled. This circuit is wired differently(correctly) than the others. Thanks again!!

Thank you very much Larry!!

Hi Larry, The only branch offs from the white and black bundles go to other switches in the boxes.

There is a 2-wire cable with black and white wires. Black is connected to the black screw on the switch and white to white bundle. There are two additional cables associated with this switch. There two additional cables associated with this switch. One cable has a white and black wire the other cable has white, black and red wires in it. The red wire from the 3 wire cable was connected to the black wire in the 2 wire cable. White wire from the 2 wire cable was connected to the bundled white wires in the four gang box. The black and white wires from the 3 wire cable were connected to the switch.

Can you click on the url and then see the image?

There is a second 2-wire cable that supplies line to the 4-gang box that is part of the black bundle and the black screw is connected with a wire to that bundle.

Here's an image of how the switch is currently wired. https://photos.google.com/photo/AF1QipPpV5Rg8NPUgsMGA6FWmplNs62X_ofL_e90dHDY

I appreciate your help on this lee & Stu as i attempt to get my head wrapped around this 3-way circuit. It appears to me that the 3-wire cable runs to the other switch box of the 3-way circuit and the 2-wire cable runs to the light. Am I correct? Thanks!!

The black wire from the two-wire cable connects to the red wire from the 3-wire cable. There is another 2-wire cable coming into the box that supplies line to the box. The black wire from this cable is connected to the black bundle and the white wire to the white bundle. The wire from the black screw is connected to the black wire bundle.

The black wire connects to the black screw comes from the bundle of black wires. There is a two wire cable that supplies the line to the 4-gang box. The black wire from this cable is connected to the black bundle and the white wire is connected to the white bundle. Sent from my XT1254 using Tapatalk

There is not a 2-wire cable at the 4-gang box. The wire that is connected to the black screw comes from the bundle of black wires.