Blackbird

I have x10 as well so I thought the program was the only way

Do I add the delay at the beginning of the program

This turned on Only 4 out of my 6 insteon dimmers and 2 out of 3 of my x10 switches. Even the ones that work come on slow as in the each take a turn to come on a couple seconds apart from each other. Is there a better program I could use? By the way I didn't put a delay on yet Sun 02/15/2015 02:44:54 PM : [iNST-SRX ] 02 50 2E.E9.72 00.00.07 CF 12 00 LTON-F (00) Sun 02/15/2015 02:44:54 PM : [std-Group ] 2E.E9.72-->Group=7, Max Hops=3, Hops Left=3 Sun 02/15/2015 02:44:54 PM : [D2D EVENT ] Event [2E E9 72 7] [DFON] [0] uom=0 prec=-1 Sun 02/15/2015 02:44:54 PM : [ 2E E9 72 7] DFON 0 Sun 02/15/2015 02:44:54 PM : [D2D-CMP 000A] CTL [2E E9 72 7] DFON op=1 Event(val=0 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Sun 02/15/2015 02:44:54 PM : [iNST-SRX ] 02 50 2E.E9.72 00.00.07 CF 12 00 LTON-F (00) Sun 02/15/2015 02:44:54 PM : [std-Group ] 2E.E9.72-->Group=7, Max Hops=3, Hops Left=3 Sun 02/15/2015 02:44:54 PM : [iNST-DUP ] Previous message ignored. Sun 02/15/2015 02:44:54 PM : [iNST-TX-I1 ] 02 62 33 A8 54 0F 11 FF Sun 02/15/2015 02:44:54 PM : [iNST-TX-I1 ] 02 62 33 AE BF 0F 11 FF Sun 02/15/2015 02:44:54 PM : [iNST-TX-I1 ] 02 62 33 AD 62 0F 11 FF Sun 02/15/2015 02:44:54 PM : [iNST-TX-I1 ] 02 62 33 A7 86 0F 11 FF Sun 02/15/2015 02:44:54 PM : [iNST-TX-I1 ] 02 62 33 A8 3F 0F 11 FF Sun 02/15/2015 02:44:54 PM : [iNST-TX-I1 ] 02 62 33 A8 33 0F 11 FF Sun 02/15/2015 02:44:54 PM : [iNST-SRX ] 02 50 2E.E9.72 33.5D.7B 4A 12 07 LTON-F (07) Sun 02/15/2015 02:44:54 PM : [std-Cleanup ] 2E.E9.72-->ISY/PLM Group=7, Max Hops=2, Hops Left=2 Sun 02/15/2015 02:44:54 PM : [iNST-DUP ] Previous message ignored. Sun 02/15/2015 02:44:54 PM : [iNST-ACK ] 02 62 33.A8.54 0F 11 FF 06 LTONRR (FF) Sun 02/15/2015 02:44:54 PM : [iNST-ACK ] 02 62 33.A8.54 0F 11 FF 06 LTONRR (FF): Duplicate or ACK for a different device Sun 02/15/2015 02:44:54 PM : [D2D EVENT ] Event [2E E9 72 7] [sT] [255] uom=0 prec=-1 Sun 02/15/2015 02:44:54 PM : [ 2E E9 72 7] ST 255 Sun 02/15/2015 02:44:54 PM : [ X10] E3 Sun 02/15/2015 02:44:54 PM : [ X10] E3/On (3) Sun 02/15/2015 02:44:54 PM : [ X10] E2 Sun 02/15/2015 02:44:54 PM : [ X10] E2/On (3) Sun 02/15/2015 02:44:55 PM : [iNST-ACK ] 02 62 33.AE.BF 0F 11 FF 06 LTONRR (FF) Sun 02/15/2015 02:44:55 PM : [iNST-ACK ] 02 62 33.AE.BF 0F 11 FF 06 LTONRR (FF): Duplicate or ACK for a different device Sun 02/15/2015 02:44:55 PM : [iNST-SRX ] 02 50 33.A8.54 33.5D.7B 2B 11 FF LTONRR (FF) Sun 02/15/2015 02:44:55 PM : [std-Direct Ack] 33.A8.54-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Sun 02/15/2015 02:44:55 PM : [D2D EVENT ] Event [33 A8 54 1] [sT] [255] uom=0 prec=-1 Sun 02/15/2015 02:44:55 PM : [ 33 A8 54 1] ST 255 Sun 02/15/2015 02:44:56 PM : [iNST-ACK ] 02 62 33.A7.86 0F 11 FF 06 LTONRR (FF) Sun 02/15/2015 02:44:56 PM : [iNST-ACK ] 02 62 33.A7.86 0F 11 FF 06 LTONRR (FF): Duplicate or ACK for a different device Sun 02/15/2015 02:44:56 PM : [iNST-ACK ] 02 62 33.A8.3F 0F 11 FF 06 LTONRR (FF) Sun 02/15/2015 02:44:56 PM : [iNST-ACK ] 02 62 33.A8.3F 0F 11 FF 06 LTONRR (FF): Duplicate or ACK for a different device Sun 02/15/2015 02:44:58 PM : [iNST-SRX ] 02 50 33.A7.86 33.5D.7B 2F 11 FF LTONRR (FF) Sun 02/15/2015 02:44:58 PM : [std-Direct Ack] 33.A7.86-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 02/15/2015 02:44:58 PM : [D2D EVENT ] Event [33 A7 86 1] [sT] [255] uom=0 prec=-1 Sun 02/15/2015 02:44:58 PM : [ 33 A7 86 1] ST 255 Sun 02/15/2015 02:44:58 PM : [iNST-SRX ] 02 50 33.A8.3F 33.5D.7B 2F 11 FF LTONRR (FF) Sun 02/15/2015 02:44:58 PM : [std-Direct Ack] 33.A8.3F-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Sun 02/15/2015 02:44:58 PM : [D2D EVENT ] Event [33 A8 3F 1] [sT] [255] uom=0 prec=-1 Sun 02/15/2015 02:44:58 PM : [ 33 A8 3F 1] ST 255 Sun 02/15/2015 02:44:59 PM : [X10-RSP ] 02 63 12 80 06 Sun 02/15/2015 02:45:00 PM : [X10-RSP ] 02 63 1E 00 06 Sun 02/15/2015 02:45:01 PM : [X10-RSP ] 02 63 12 80 06

I have an android

I have 3 x10 lights and 6 insteon and when I turn them all off or all on a couple of the lights at random, dont work. I am using a two programs because I am including x10. ALL OFF If Control 'Remote 2 Bedroom - H' is switched Fast Off Or Control 'Remote 1H All on Off' is switched Fast Off Or Control 'Back Porch Light' is switched Fast Off Then Set 'Back Porch Light' Off Set 'Bathroom Lights' Off Set 'Kitchen Lights' Off Set 'Living room Main Lights' Off Set 'Living room above tv lights' Off Set 'Living room above chair light' Off Else - No Actions - (To add one, press 'Action') ALL ON If Control 'Remote 1H All on Off' is switched Fast On Or Control 'Remote 2 Bedroom - H' is switched Fast On Then Set 'Back Porch Light' On Set 'Bathroom Lights' On Set 'Kitchen Lights' On Set 'Living room Main Lights' On Set 'Living room above chair light' On Set 'Living room above tv lights' On Send X10 'E3/On (3)' Send X10 'E2/On (3)' Else - No Actions - (To add one, press 'Action') Any idea why the lights wont all consistently turn on and off? Is there a traffic jam with the signal to every device?

Thats over my head

Any idea when that will be?

So I do need to port forward on my router for tiny cam to work? Is it safe or secure to port forward?

This is the camera I have http://www.smarthome.com/insteon-2864-226-wireless-hd-720p-ip-camera-with-pan-tilt-and-night-vision-black.html Not sure about how to port forward and not sure if it has a mini hosted server inside.

I have an android phone. To my understanding mobilinc canera viewing is only for the iphone

I have an isy and a insteon hd camera but cant find a reliable app to view it on my phone. I thought maybe I need to by the hub and only connect my camera to it and nothing else. Would this affect the isy? Is there a better solution? Thanks

Any chance that can be an added feature in the future?

I thought geofencing was only for iphone. I have an android and was thinking of doing a program with the tasker app

Whats the ETA on that?

Thanks a lot!

Is that because 640pm and 940 am are not in the same day?

Why next day? Will "next day" work everyday after that? thanks

I want to open my front door between 640pm and 940am and have my light turn on. But when it is after 640pm and I open the door, nothing happens. If I remove the schedule line then opening the door turns on the light. If Status 'Front Door-Opened' is On And From 6:40:00PM To 9:40:00AM (same day) Then Set 'Living room above tv lights' On Else - No Actions - (To add one, press 'Action') Is this done correctly? Why wont this work? Thanks

I just bought the basic ISY and I think the pro module is $30. What are the benefits? I only know you can add more devices or programs. thanks

Is it possible to make the date notification in the emails to day month year instead of year month day? Thanks

That works. Thanks. What happens if I want the light to be on by the switch, will this program affect that?

That's why I was thinking that if the motion sensor does not detect movement before door is open then it means I am entering the house. And if it detects movement before door is open then it knows im leaving. I cant open my door to leave without setting off the motion sensor

I only saw the option to go to 30 seconds but not lower. Im new to this would you be able to show me an example program?

If I leave the house I want the ISY to turn off all the lights in the house. I have a door sensor on the back door and a motion sensor near the back door. I thought I could use the motion sensor to confirm movement on the inside of the house prior to the door being opened so the ISY would know Im leaving the house and not entering the house. Any suggestions on this? Thanks

Should the time the lights stay on be controlled by the options of the motion sensor itself (which im doing now) or by a wait command. Can someone recommend the best way to do this? Thanks