bgrubb1

I read through this entire thread and saw a couple of comments on adding a "energy" type to facilitate using variables from a Brultech Gem / DB. I installed the NS and dont see that option. Is it still on the roadmap ?? ...Barry

I have a ticket open for a remote friend. this is exactly what I was trying to do, but when I SSH in, i get the user name prompt, but cant type in password. no keyboard entry accepted on multiple SSH apps any ideas ? ...Barry

I am using XXXXXXXXXX@mms.att.net and receiving texts fine Did you use a comma between ? ...Barry

backup works

SMTP works Might have spoke to soon Test mail from a group works perfect When I try to send a custom message - no joy test send smtp - [ID 0003][Parent 0001] If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Send Notification to 'Default' content 'test1.1' Else - No Actions - (To add one, press 'Action') Nothing appears to send to any of the 3 destinations I tried creating a second message this morning and that message works, so I have something wonky in my message. Sorry for the call out

no issues variables work now

Good Catch Same here ...Barry

I have a simple scene, zwave motion sensor as a controller and an insteon light switch as a responder. I am trying to control the time the scene executes to only when dark. I saw elsewhere in the forum "The ISY can turn on and off scenes as well as switches. Instead of turning each switch on individually, simple pick the scene off of the list of things to 'Set' in your program." The program-- scene test - [ID 0045][Parent 0001] If From Sunset To Sunrise (next day) Then Set 'motion test' On Else Set 'motion test' Off The Scene Am I missing something or should this work ? Currently it executes Day or NIght ...Barry

Working now Thank You ...Barry

Something seems different in the Ployglot / ISY interaction on 5.0.4 I have cleared all Java re-installed ISY finder, deleted and uninstalled Node servers and re-installed multiple times. It appears when Polyglot sends the node info to ISY, something is not coming across correctly. from the screenshot the wemo nodeserver is created on ISY and its sub nodes, but all nodes look empty on ISY screen If I select the "polisy bulb" which is an insteon device I get a typical dimmer screen. If I then select the wemo switch, I then get the dimmer screen, not the wemo on/off screen that said, the on/off does work ...Barry

Install went fine but something weird going on with node servers Even after removing and re-installing it appears the nodes (screens) are not getting pushed to ISY for example my wemo node server reinstalled complete with nodes and names, but if I select and switch the ISY screen is the same as the last screen it was on (as in if I was on a dimmer switch, the same screen for the dimmer is there instead of a simple on / off screen) that said the on and off dimmer layout does turn wemo switch on / off ...Barry

no issue if only ISY on Polisy

Please let us know when you determine the "preferred" solution. Thank you again ..Barry

Michel have you settled on a Zwave solution ?? with the Semi shortage would love to be ahead of the game ...Barry

Michel This is so cool, thank you for letting us "play" ...Barry

i had a similar issue after switching serial PLM to USB A sudo service isy restart with USB plugged in fixed it It appears it's USB but not plug and play Needs PLM installed when ISY starts ...Barry

I re-capped one and plugged the serial daughter board in wrong. Pretty sure I blew the daughter board. Please PM me ...Barry

All good here as well Thank you Michel

Hmmm No Joy here. still get [admin@polisy ~]$ sudo service isy restart isy not running? (check /var/isy/isy_daemon.pid). loading uftdi.ko kldload: can't load uftdi.ko: No such file or directory /usr/local/etc/rc.d/isy: WARNING: failed precmd routine for isy [admin@polisy ~]$ ....Barry

same exact result here

same here Seen in AC, but constant spinning with no connection

@Michel Kohanim I rebooted the Polisy then plugged in the USB PLM (after fully booted) now I get ugen0.2: <FTDI FT232R USB UART> at usbus0 ugen0.2: <FTDI FT232R USB UART> at usbus0 (disconnected) ugen0.2: <FTDI FT232R USB UART> at usbus0 ugen0.2: <FTDI FT232R USB UART> at usbus0 (disconnected) ugen0.2: <FTDI FT232R USB UART> at usbus0 Now the AC is in a loop and displaying

igb2: netmap queues/slots: TX 4/1024, RX 4/1024 pci0: <encrypt/decrypt> at device 8.0 (no driver attached) xhci0: <AMD FCH USB 3.0 controller> mem 0xf7fa2000-0xf7fa3fff irq 18 at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7fa5000-0xf7fa53ff at device 17.0 on pci0 ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ehci0: <AMD FCH USB 2.0 controller> mem 0xf7fa6000-0xf7fa60ff irq 18 at device 19.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 sdhci_pci0: <Generic SD HCI> mem 0xf7fa7000-0xf7fa70ff at device 20.7 on pci0 sdhci_pci0: 1 slot(s) allocated amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: console (115200,n,8,1) tpm0: <Trusted Platform Module> port 0xc31-0xc32 iomem 0xfed40000-0xfed44fff on acpi0 tpm: device 0x001a15d1 rev 0x10 WARNING: Device "tpm" is Giant locked and may be deleted before FreeBSD 14.0. orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0 superio0: <Nuvoton NCT5104D/NCT6102D/NCT6106D (rev. B+)> at port 0x2e-0x2f on isa0 gpio0: <Nuvoton GPIO controller> at GPIO ldn 0x07 on superio0 gpiobus0: <GPIO bus> on gpio0 gpioc0: <GPIO controller> on gpio0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Trying to mount root from zfs:zudi/ROOT/default []... Root mount waiting for:ugen1.1: <AMD EHCI root HUB> at usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 usbus0 CAM usbus1 uhub0 on usbus1 uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1 on usbus0 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: 4 ports with 4 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SATA SSD SBFM61.3> ACS-4 ATA SATA 3.x device ada0: Serial Number 218807050F8D00029175 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 30533MB (62533296 512 byte sectors) Root mount waiting for: usbus1 uhub0: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 Root mount waiting for: usbus1 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.3: <vendor 0x0cf3 product 0xe003> at usbus1 Dual Console: Serial Primary, Video Secondary apuled0: <APU2> at iomem 0xfed81610-0xfed8161b,0xfed81664-0xfed81667 on isa0 resetsw0: <UDXRSW-2> at iomem 0xfed81664-0xfed81667 on isa0 lo0: link state changed to UP igb0: link state changed to UP ubt0 on uhub2 ubt0: <vendor 0x0cf3 product 0xe003, class 224/1, rev 1.10/0.01, addr 3> on usbus1 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() Security policy loaded: MAC/ntpd (mac_ntpd)

Still trying to get USB to work. I Installed the FTDI drivers and PC sees the USB interface. Anything else I can try ? ..Barry

interesting question.... I initially hooked up a USB PLM (it was old but working last time I knew, way back in the Vera days) it said not connected although it responded to the reset button. I re-capped it today and it still appears functional, but not seen by ISY ...Barry