bgrubb1

there are several programming steps you need to do on the Vista panel to make it all work out there is a guide on the site pointed to in the guide

Dont think its a "C" problem, I tried other versions with same results that said one of my machines took it

So are my and LarryLix's times acceptable, or an indication that something is wrong ?? The biggest delay I have is "Loading Scene Widgets" and I only have 6 scenes ..Barry

how do you access the admin console with http ??

My ISY takes about a minute to load the admin console and 3 minutes to open the programs tab - if it opens I am on 5.0.13D with only polyglot (4 servers) and weatherflow node server running I do have GEM updating variables via chunk every 90 seconds diagnostics say I have plenty of memory (see below) I cant figure out what is causing the issue, in searching the forums it suggests factory reset / restore wont change anything. all was good on the 4XX branch, so Have been chasing nodeservers, but not sure what to try next. Probably 40 devices and 50 programs. any ideas please ?? ...Barry

I am getting the "that command doesn't work for device bedroom thermostat" running 4..5.4 The device is in the portal as a zwave device and shows as a discovered device in the echo app Is there any other requirement to make this function ?? ...Barry

Thank you Benoit. Works fine in private mode now since portal upgrade ....Barry

Looks like it doesn't work if the iPad browser is in "Private" mode

Sorry my bad Resetting my network made Alexa work even though internet in and out worked Didn't realize portal login didn't work from an iPad, works from a pic ....Barry

Bump

Then you Paul for the help ....Barry

Does disable scene only work on 5.x.x ?? Don't see that option in 4.x.x ...Barry

Thats part of why I am confused. Running 4.5.1 with a Dashbox feed to the ISY dont know how I am getting a non integer value and a message that I have not created to send ..Barry

another question Does calling a program that is disabled enable it ? not sure what the comment about disabling it meant Thanks again for the help ...Barry

Done, will see if this corrects the issue, thanks for the knowledge Is this a bug in the ISY ?? ..Barry

Will try that Thank You sir ..Barry

can u elaborate please oh guru I have noted in the logs that at the time that the message triggers, the ISY is evaluating current draw from other circuits to determine if it should turn outlets or sirens off or on are you saying have one program to evaluate and call another program if the "IF" statement is true ??

State Variable

my point exactly The program should be disablled but I am still getting a message and its not the message I have in alerts

No on Mobilinc connect, disconnected it a long time ago and use the UDI Portal now

I still cant figure this one out I do not have a program or a message for a variable changing , nuch less showing me the value of the variable, althought the message says Program: Low_Voltage which is the name of the program that world trigger my message ..Barry

Well Based on this feedback I have discovered it's not that program causing the issue the message I received in the message I am receiving is not the message the program is supposed to send I am getting a "Variable Changed" message, not the text I have set up in alerts the log file does not seem to show the message sent at the time in the mail am I missing something ?? ..Barry

I monitor house voltage from a variable received from my Brultech GEM There is a bug in the GEM (reported by several users) where it sends a wrong value ( in my case 2.33 Volts) I have attempted to change my low voltage program to ignore if the value is 2.33 Volts and since the ISY programs use integers, ignore 1 volt to 4 volts I still get a 2.33 Volt message when the bug occurs, shouldn't this logic eliminate it ?? Voltage_Low - [iD 0002][Parent 0001] If $Brultech_Voltage < 100 And ( $Brultech_Voltage < 1 Or $Brultech_Voltage > 4 ) Then Send Notification to 'Voltage Below 100 Volts' Wait 1 minute Disable Program 'Voltage_Low' Wait 10 minutes Enable Program 'Voltage_Low' Else - No Actions - (To add one, press 'Action')

Still show as "ISY" from admin console

If I click on the admin console from my local PC, I get 5 choices to select One for my local ISY now renamed "Barry's Production ISY" One for my test ISY called ISY All good so far One for my production ISY with a long URL, this is the first one, but via the portal, still just called ISY One for my test ISY, long URL, still called "ISY" One for a buddies ISY via the portal, still called "ISY"