asbril

I "purchased" the PG3 nodeserver. When and how do I actually pay for it ?

I'll work on it as you suggest, but right now the program works, basically by including the steps of the "Activity" in the program rather than the "Activity/Start" itself.

Good news and slightly less good news.... I had made a mistake in the program using the TV node for selecting the channel instead of using the Xfinity box node. This allowed me to replace the Activity/Start (which still does not work) with the various steps, channel number-select- volume, and now the program works as desired. Thanks for the great nodeserver.

I only have Zwave devices

This could explain my lack of success. The devices that I am using in the scene all have Scene Nodes, but they all only have the option of Default, Command or Ignore.

HH : Harmony Hub Routine : Sorry, I meant "Activity" as it is called in the Harmony Hub App. Main tab : In ISY Administrative Console, there are 3 tabs : Main - Programs - Configuration When the Harmony Hub nodeserver is added, then it adds nodes for the devices included inn the Haemony Hub as well as for the "Activities"

@Michel Kohanim? I am pretty sure that you are right ! Now I need to find out what I am doing wrong.

I am all Zwave (some 80 Zwave devices) and two weeks ago I started to explore Scenes, as up to now I use only programs. Michel told me that Zwave scenes should work faster than programs. Unfortunately so far I have not been very successful in creating Zwave scenes : (1) I was able to create a scene whereby specified devices went ON (as desired) but not OFF. (2) Apparently one has to use a scene node of the selected control device which seems to imply a double-click on the switch. I doubt that my wife would remember to double-click. I am as keen as you to make Zwave scenes work but so far not much success.

I installed the PG3 Harmony Hub nodeserver, connected to my ISY 994 and I have a few issues using the nodeserver that I don't have when using the Harmony Hub App on my Iphone : (1) In my ISY "wake-up" program the Vizio TV "Command - Power Toggle" works and switches on the TV. However "Command - Number X" (followed by "Command-Select") does not. Before, when using the PG2 nodeserver, the number X would appear on the TV screen and after "Select" the TV woulkd switch to that channel. Now X does not show and nothing happens. (2) I have a HH routine that I named "Watch NBC" and that turns on the TV and switches to NBC. This works when clicking on the routine in ISY's Main tab, but it does not when including it in a program.

Winterly 54F this morning in Miami, but 74F now at 3 pm

@bpwwer One more question I was able to install the Harmony Hub ns in PG 3. It shows up in the dashboard with all the nodes. I have my ISY in the list of ISY's, but after restarting the ISY AC, the ns does not show up in my ISY. What may I have done wrong or forgotten ? RESOLVED

Resolved. Thanks for your help

I know, but just want(ed) to express my appreciation for your work. Now I need to sort out why it does not let me install the ns (apparent problem with my Portal act).

I have zero issue with paying. Developers deserve compensation for creating and maintaining.

Thanks Bob !!!! I think that I now know what the issue may be. I am logged in, but in my ISY Portal account the Polisy is not linked to my Portal act. It has a yellow icon, stating that my temporary portal act is expiring soon. There is no issue with my (main) ISY. My Portal account expires at the end on 2022. Something must have gone wrong because (I think that) when I first set up ISY on Polisy it was linked to my Portal account

Thanks @bpwwer I just figured it out. As I just posted in the Harmony Hub forum page, there is no "install" next to this nodeserver in the Store, and the same with some others. Any particular reason ?

Any particular reason why there is no "Install" next to the PG3 Harmony Hub nodeserver (and with other ns) ?

I'm sorry. Yes you did answer me. However how can I point PG3 to my ISY ? That was in fact my question, but not properly formulated. p.s. I just found it under ISY and done. Thanks

Thanks Michel, Unfortunately that did not resolve it, but this is not urgent and I will again later this week.

I was going to wait with PG3 till Zwave migration tool is ready, but I have issues with the (PG2) Harmony Hub nodeserver and therefore I am thinking of using the PG3 HH nodeserver. Can I use PG3 with ISY and not yet on ISY on Polisy ? I think to remember that one can use both PG2 and PG3 with same ISY. However, if this is possible, I have the issue that I can not open the Polisy Configuration in PG3. It remains stuck on " Please wait, getting configuration... ".

How did you set the devices in the Scene ( default, Command, ON, OFF ? Thanks

I don't see a reason why you would dissociate UD from Google and if it does not show on your wife's phone, then do the following : In the Google Home App there is a + sign on the top left Click on + Set up device Works with Google Universal devices and then follow the steps with your credentials If I remember well, your issue is that GH does not recognize your wife's voice instructions. As long as UD is linked to your wife's GH, then it is probably not a UD issue but GH not recognizing your wife's voice. I don't right now remember how to re-record one's voice on GH, but you should be able to find that on the internet. Let us know how it goes

I understand and know that scenes work well with Insteon. I am full Zwave with no Insteon and resolve my "associations" with programs. However I was told that (at least theoretically) Zwave scenes work faster than programs. In one test scene this was indeed the case with turning lights ON, but (1) I did not achieve 'lights OFF (2) Using a scene node in the ON scene meant a double-click on the switch, which my wife would not like. I still believe that theoretically scenes should work with Zwave, but more research is needed.

I don't think this is a ISY issue. Though you may already tried this, I would first suggest to reset your wife's "Hey Google" in the Google Home App.