asbril

These do exist with Zwave. https://aeotec.com/z-wave-outlet-socket/index.html

I have some 80 Zwave devices, including GE/Jasco, Homeseer, Zooz and Inovelli, and in Scenes I can only find, like you, Command, default and ignore. However when I right click (in AC) and go in the Zwave details I can see that Association is part of the device. so Association does indeed exist...... somewhere.

Is there a practical difference between using a simple program (IF motion sensor is ON THEN light X is ON - Wait 3 minutes Light X is OFF ) and using a variable ?

Without the mythical "Association", with Zwave there is no speed difference beween usng a Scene or a Program.

Thanks, that helped. I noticed that I can not get the nodeserver to work both on ISY and on IoP. It is not a big issue as I just use the Pushover email, but I wonder why. Maybe I should try the PG2 version on ISY and keep the PG3 version on IoP.

Thanks @JimboAutomates Mostly resolved by deleting and re-installing nodeserver. I forgot how to exactly use in programs. As example I have motion sensors at the two entrances to my home and also have a smoke detrector and want to send a Pushover messages to my Iphone. The Iphone connection works when using the Pushover email, so I know that Pushover on my Iphone works. When I want to send a notification with normal priority when the sensors are activated but high priority when there is smoke, I can see the options when programing, but in what order do I put the various options : Priority, Set device on message on motion detected, Set Pushover Device All, anything else ? Thanks

Several times.

Michel, everything works, so no concerns from me.

Version 3.0.41 Status: Connected Frontend Version: 3.0.41 ISY Version: 5.3.0 Uptime: 46 Minute(s) 20 Second(s) (c) 2022 UDI

I followed Michel's Sudo instructions and everything seems to work. IoP shows as 5.0.4 (not 5.0.4.2) in Administrative Console but 5.0.3 in XX.X.X:3000. It was mentioned that going forward one should no longer use Sudo for updates but do this within the Administrative Console (or in XX.X.X:3000 ?), but I don't see where / how. Furthermore where can I change the Polyglot's username / pw from admin/admin ?

yes

Something must not be right with my Notification nodeserver. In the Adm. Cons. Main tab my various Pushover nodes show, but each have a "0" only in message. When I create a program and select Notification Controller, I have the sub-options Nodeserver Online, REST Status and Notification. With Notification there is again only "0". Nowhere can I select one of the pushover nodes that are listed in the Main tab and same for priority etc. Right now I use my Pushover email address to send a notification to my phone, but no priority etc, I may have to re-install the nodeserver.

I have been trying to find out for several weeks, but so far nothing.

I moved the Notification nodeserver to IoP and it works. However I remember that I was previously able to set type of urgency to messages, such as normal, urgent, emergency (or similar). Regular messages work. Now I don't see anywhere where to set the priority.

nope

Yes I waited more than 15 mins

I did the 6 * reset and everything seems to work and no more flashing.

I think that upgrade went through. I have not yet done the 6 * reset and Polisy is still flashing.

Thanks !!!!! In the Administrative Console, the ISY shows as 5.4.0. In Putty, it says that everything is up to date. I assume that the pinhole in the front of Polisy is the reset button, and I should press it with a paperclip 6 times ?

I also have the flashing light. everything seems to work as before (though PG3 still shows 5.3.0), except for Weatherbit; the controller shows all data in Celcius but at zero. The other days show data in Fahrenheit and apparently with correct data, but with wrong day. Node 0 shows as Sunday and Node 1 shows as Monday...... while of course it is now Tuesday. I don't use the nodeserver in any program, so it is not a big issue.

I did that as well

I did in Putty : sudo pkg update sudo pkg upgrade sudo service pg3 restart No error message but Polisy still shows : Version 3.0.41 Status: Connected Frontend Version: 3.0.41 ISY Version: 5.3.0 Uptime: 13 Minute(s) 1 Second(s) (c) 2022 UDI Running on Polisy Documentation

I always wonder how Michel finds the time for these individual sessions. I have had the benefit of several of these and it shows extraordinary commitment.

BTW a lesson learned. This morning I performed a Synch All and some 5 old Zwave devices showed up that I had removed some time ago, either because I forgot to exclude or because the switches just failed and could not be excluded. They remained in my network, possibly creating interference. I now removed these as remove failed node, something I should have done long ago.

I know nothing about Ring......other than it exists