dennisric

no difference

Yes same

I would like to get the portal but for some reason purchase modules does not work anymore. I click on manage modules and it says up to date. Click on purchase modules and nothing happens. I rebooted the ISY and no change. Running firmware 4.3.26. What can be wrong? Everything else works great. Any ideas.

I did click on purchase modules and nothing comes up. My cursor does a quick spinning circle an then nothing changes on screen and available modules do not show.

I was just at the Universal Devices site and find nothing about the portal. I click on purchase modules and nothing comes up. I am using firmware 4.3.26. I was able to access purchase modules before but can't now. Any ideas? Thamks

Thanks for the answer. It took three tries before ISY recognized it. I am running 4.2.30. I want to set this up so I can control remotely while on vacation. My sprinkler runs off my well which I have set to turn off when my alarm is armed to on and it turns back on when the alarm is disarmed. This way I can remotely turn well back on run a sprinkler program and then have well shut off again when watering is done. Water is never on when house is unoccupied.

I just purchased this 5010A EZFlora but my ISY-994i says it is not supported. Is this true? How can I control this thru the ISY-994i? I have the 4.2.30 firmware installed.

Teken, I followed your instructions exactly. I get Mail Server Failure (TLS negotiation failed) This is with TLS checked or unchecked. I went to gmail and opened my account just to be sure of the right password was used and I was able to log in. Also when I had it set as default I started getting old emails just like mzn50 stated in his post. I wasn't receiving the new notifications but getting days old ones like mzn50 is. Thanks for the help.

My email notifications also just stopped for no reason. I have always used the default setting. Worked for a couple years then just about a week ago stopped. I am using the ISY994 firmware 4.1.2. I have searched this forum and looked at the ISY manual and can't find any solid instructions on how to setup email notifications. I tried the smtp.gmail.com I get mail server failure, connection failed. I also have notification to my cell phone sms, that works with the default setting but not when I setup the gmail. What am I missing. Is there some list of instructions for how to do this with examples?

Thank you so much LeeG for the help. You were right about the module ID the 5 and 6 look exactly the same. Printed in bold and without a magnifying glass you can't tell the difference. My 27.D5.73 looks like 27.D6.73 the 27.D5.85 looks like 27.D6.85 and the 27.D5.61 looks like 27.D6.61. Thanks again for the help. This forum is great, always the best people around to help figure things out.

Thu 04/17/2014 10:25:06 PM : [27 d6 61 ] Added to list of devices to link to ISY Thu 04/17/2014 10:25:06 PM : [iNST-TX-I1 ] 02 62 27 D6 61 0F 0D 00 Thu 04/17/2014 10:25:06 PM : [iNST-ACK ] 02 62 27.D6.61 0F 0D 00 06 (00) Thu 04/17/2014 10:25:16 PM : [iNST-TX-I1 ] 02 62 27 D6 61 0F 0D 00 Thu 04/17/2014 10:25:16 PM : [iNST-ACK ] 02 62 27.D6.61 0F 0D 00 06 (00) Thu 04/17/2014 10:25:24 PM : [iNST-TX-I1 ] 02 62 27 D6 61 0F 0D 00 Thu 04/17/2014 10:25:24 PM : [iNST-ACK ] 02 62 27.D6.61 0F 0D 00 06 (00) Thu 04/17/2014 10:25:28 PM : [27 D6 61 0 ] Failed to add device, reason 3

I tried that several times and no go.

I just received my three new on/off modules 2635-222 and can not get the ISY to link to any of them. Get a fail to connect. I am using firmware 4.1.2 for some time now with no other problems. Are these supported by the ISY? They are in the device list. Anyone else having same trouble linking these to the ISY? ISY PRO model

I just checked the box for use default and did a test send. It worked going to my SMS messaging to cell phone but did not send notification to my email. Now I have the problem of setting back the way it was because I don't remember how set before such as the SMTP Server, SMTP port, Password. I know I should have written this down before making changes but wasn't thinking. Where can I find this info for the settings. I do remember UserID is isyalerts@gmail.com. My ISY has been working problem free for a very long time before this email glitch. Thanks for all the help.

This is what I get when doing a test Email send Mail Server Failure [TLS negotiation failed]

I checked my junk mail folder and nothing there. I also have the ISY send SMS message to my cell phone which also stopped at the same time as the email.

System -50001 -12 Sat 2013/10/12 01:03:28 PM System -50001 -12 Sat 2013/10/12 01:03:49 PM System -50001 -12 Sun 2013/10/13 09:26:37 PM System -5012 35 Wed 2013/10/16 08:15:31 PM System -5 Start Wed 2013/10/16 08:15:36 PM System -170001 [Network] Established Wed 2013/10/16 09:15:53 PM System -5012 26 Mon 2013/10/21 09:43:59 PM System -5012 27 Tue 2013/10/29 04:04:36 PM System -50001 -17 Thu 2013/10/31 12:14:38 PM System -5012 28 Sat 2013/11/02 06:56:03 AM System -50001 -12 Sat 2013/11/02 06:40:13 PM System -5012 29 Mon 2013/11/04 08:35:38 PM System -5012 30 Mon 2013/11/04 08:40:09 PM System -5 Start Mon 2013/11/04 08:40:13 PM System -170001 [Network] Established Mon 2013/11/04 08:43:17 PM System -5012 26 Mon 2013/11/04 08:57:44 PM System -5012 29 Mon 2013/11/04 09:07:04 PM System -5012 31 Tue 2013/11/05 06:02:27 AM System -50001 -18 Tue 2013/11/05 06:02:27 AM System -50001 -18 Tue 2013/11/05 04:26:41 PM System -50001 -18 Tue 2013/11/05 04:26:41 PM System -50001 -18 Tue 2013/11/05 04:41:29 PM System -50001 -18 Tue 2013/11/05 04:41:30 PM System -50001 -18 Tue 2013/11/05 05:54:32 PM System -50001 -18 Tue 2013/11/05 05:54:32 PM System -50001 -18 Tue 2013/11/05 09:02:06 PM System -50001 -18 Wed 2013/11/06 01:27:07 AM System -5012 32 Wed 2013/11/06 06:00:07 AM System -50001 -18 Wed 2013/11/06 06:00:08 AM System -50001 -18 Wed 2013/11/06 05:35:04 PM System -50001 -18 Wed 2013/11/06 05:35:05 PM System -50001 -18 Thu 2013/11/07 06:01:49 AM System -50001 -18 Thu 2013/11/07 06:01:49 AM System -50001 -18 Thu 2013/11/07 06:40:56 PM System -50001 -18 Thu 2013/11/07 06:40:56 PM System -50001 -18 Fri 2013/11/08 05:58:30 AM System -50001 -18 Fri 2013/11/08 05:58:30 AM System -50001 -18 Fri 2013/11/08 04:07:58 PM System -50001 -18 Fri 2013/11/08 04:07:59 PM System -50001 -18 Sat 2013/11/09 12:08:49 PM System -50001 -18 Sat 2013/11/09 12:08:50 PM System -50001 -18 Sat 2013/11/09 01:54:59 PM System -50001 -18 Sat 2013/11/09 02:11:12 PM System -50001 -18 Sat 2013/11/09 02:11:12 PM System -50001 -18 Sun 2013/11/10 11:11:27 AM System -50001 -18 Sun 2013/11/10 11:11:29 AM System -50001 -18 Sun 2013/11/10 12:28:18 PM System -50001 -18 Sun 2013/11/10 12:28:21 PM System -50001 -18 Sun 2013/11/10 01:54:21 PM System -50001 -18 Sun 2013/11/10 04:00:20 PM System -50001 -18 Mon 2013/11/11 12:06:07 PM System -50001 -18 Mon 2013/11/11 12:06:08 PM System -50001 -18 Mon 2013/11/11 02:54:08 PM System -50001 -18 Mon 2013/11/11 02:54:12 PM System -50001 -18 Mon 2013/11/11 06:58:11 PM System -50001 -18 Mon 2013/11/11 06:58:11 PM System -50001 -18 Mon 2013/11/11 07:50:42 PM System -50001 -18 Mon 2013/11/11 07:50:47 PM System -50001 -18 Tue 2013/11/12 05:59:00 AM System -50001 -18 Tue 2013/11/12 05:59:03 AM System -50001 -18 Tue 2013/11/12 04:36:58 PM System -50001 -18 Tue 2013/11/12 04:36:59 PM System -50001 -18 Wed 2013/11/13 06:05:25 AM System -50001 -18 Wed 2013/11/13 06:05:25 AM System -50001 -18 Wed 2013/11/13 05:34:39 PM System -50001 -18 Wed 2013/11/13 05:34:40 PM System -50001 -18 Thu 2013/11/14 05:58:18 AM System -50001 -18 Thu 2013/11/14 05:58:18 AM System -50001 -18 Thu 2013/11/14 05:21:27 PM System -50001 -18 Thu 2013/11/14 05:21:27 PM System -50001 -18 Fri 2013/11/15 05:40:49 AM System -50001 -18 Fri 2013/11/15 06:00:43 AM System -50001 -18 Fri 2013/11/15 06:00:44 AM System -50001 -18 Fri 2013/11/15 04:30:45 PM System -50001 -18 Fri 2013/11/15 04:30:45 PM System -50001 -18 Sat 2013/11/16 04:40:17 PM System -50001 -18 Sat 2013/11/16 04:40:17 PM System -50001 -18 Sat 2013/11/16 08:00:50 PM System -50001 -18 Sat 2013/11/16 08:00:50 PM System -50001 -18 Sun 2013/11/17 11:20:51 AM System -50001 -18 Sun 2013/11/17 11:20:52 AM System -50001 -18 Sun 2013/11/17 12:57:34 PM System -50001 -18 Sun 2013/11/17 12:57:34 PM System -50001 -18 Mon 2013/11/18 06:02:16 AM System -50001 -18 Mon 2013/11/18 06:02:16 AM System -50001 -18 Mon 2013/11/18 05:17:40 PM System -50001 -18 Mon 2013/11/18 05:17:40 PM System -50001 -18 Mon 2013/11/18 06:52:53 PM System -50001 -18 Mon 2013/11/18 06:52:54 PM System -50001 -18 Mon 2013/11/18 07:43:36 PM System -50001 -18 Mon 2013/11/18 07:43:36 PM System -50001 -18 Mon 2013/11/18 08:08:18 PM System -50001 -18 Mon 2013/11/18 08:13:45 PM System -5 Start Mon 2013/11/18 08:13:49 PM System -170001 [Network] Established Mon 2013/11/18 08:19:12 PM System -50001 -18 Mon 2013/11/18 08:44:37 PM System -50001 -18 Mon 2013/11/18 08:44:51 PM System -50001 -18 Mon 2013/11/18 08:51:14 PM System -50001 -18 Mon 2013/11/18 09:15:45 PM System -5012 26 Tue 2013/11/19 06:03:20 AM System -50001 -18 Tue 2013/11/19 06:03:21 AM System -50001 -18 Tue 2013/11/19 08:11:42 PM System -50001 -18 Tue 2013/11/19 09:17:14 PM System -50001 -18

I am also getting mail server failure. I can connect just fine over the internet to my ISY.

LeeG, Thanks for the help with this. After I sat back and looked at it again I was missing the scene part of it. I now have it working exactly the way I want it to. I have the ON OFF button as controller and the secondary buttons as responders in a scene then set my timers in a program and what I missed was to turn off the scene in the program. My ISY has been working for so long without any problems that it just takes some thinking to get back into the program mode. This forum is great with lot's of helpful people. Thanks again

yes I have the secondary buttons set as responders to the main button 1. So I have a scene with button A as responder to Button 1 which is the big ON button at the top. Everything works but the led does not go out on the A,B,C or D buttons once they have been pressed. Only way led turns off is to push the button again and it resets to led off

I am attempting to use the keypadlinc 2487s to control my 30" whole house fan. It is strictly on or off and does not need speed control. I want to use the main on off buttons to turn the fan on and then shut it off as I please. Then I would like to set each button A,B,C,D to have some time value so that when I press that button such as A it will run for so many minutes and then shut off the fan. I was able to setup a program in the ISY for each button when pressed to run the fan for a time and then shut off. So I hit button A and the keypadlinc relay comes on and the ON button led lights and the fan turns on. When the time is over the ON button turns OFF and the fan shuts off but the led stays lit on the A button until I press it to make it go out. I have all four buttons working the way I want with a test time of 10 seconds and all goes as I want except for the led on the respective button does not turn off in response to the relay turning off. I know someone out there must be doing the same thing but I did not find anything to match this in the forum. How do I accomplish this? This is my first time setting up one of these switches. I do have over forty insteon modules in use and several programs running in the ISY that all work great. Just never used any keypadlincs before this. Also the 2487S was just purchased a few days ago. Thanks

I would not use a computer power cord for this. Most are only 18 ga wire not rated for a washing machine. As shown on this cocoontech forum. http://cocoontech.com/forums/page/artic ... ensors-r58

I did a good test in water, you are right. But I see that as long as it is wet the LED keeps flashing on the sensor meaning that it has to constantly send signal to give wet status. So much for a ten year battery if it gets wet and stays wet for several hours. I am rethinking my purchase of these. I think Smarthome is not that smart. How much thinking goes into their products before putting them to market. I think these should lock into the wet mode until user does a press of the set button to reset the sensor. You could get a small leak which dries and then turns into a bigger leak later. Maybe they try to push things out too fast. Well the thirty day money back is OK with me, just have the cost of shipping back and must put insurance on also. I sent some stuff back once and they claimed they never received them. I was out about a hundred bucks. Not impressed with these. Just to add I took the bottom off and I can't believe that the sensor tabs on the bottom are just pressure set to the main board. These should be hard wired to the board. Something as important as a water sensor should have good reliable connection. If I keep these I will make a modification and solder some good wire leads to connect them. Made very CHEAP! Some insurance companies will give a discount if you have water detection setup.

Could the names of the nodes be changed to show the actual status of it. Such as rename dry node to wet and rename wet node to dry then when it detects water the wet node would show ON. And when it is dry the dry node would show ON. Sounds more logical to me. Why is it backwards. Or is this a change that has to be done in the firmware.

WOW! That was it. The device didn't get the update. Now showing status. Thanks big time LeeG Can always find help here from a great group of people.