MrBill

Yes....

Install 5.3.3, although it's labeled Test Build it has been out since March 8th at this point and is stable with no known issues. admin/admin for the default user name and password. If you're on Windows, Install The Launcher for the admin console, then you'll always have the correct version. Do any of your programs use "Adjust scene", those will require manual intervention. One more thing... Open Notepad, Click the top of your program tree My Programs, then right click it, then select Copy Folder to Clipboard. Click in the empty notepad window and Ctrl-V (paste) then Save As and give it what ever name you like. Now you have a text based copy of your programs for reference. After updating if any of your programs need updating they will be marked in YELLOW on the Programs > Summary tab, and they most likely will include "Adjust Scene" entries that couldn't migrate.

I'm unlcear how to add the ISY Portal module as the Purchase Modules menu item doesn't seem to exist in v5.0.2 --- Unrelated Suggestion: duplicating the V5.x numbering system seems like it's going to create ongoing confusion and make using search engines difficult. Should perhaps ISY on Polisy have a distinct version number? perhaps v6.x ???

Without all the programs it's hard to trace, (you said you have 9 but I see 6). The first thing to do tho, is not use status with your KPL buttons, instead use the "control" dropdown, and use OR in the same program for all equivalent keys on different keypads. For example: if 'Mudroom_Entry / DB.Dog Bath / DB.Dog Bath.E' is switched On Or 'otherkeypad.E' is switched On Or 'anotherkeypad.E is switched On then --- that will probably clear up your race condition that occurs because Control means someone actually pushed the button, rather than the status that can also be triggered by scenes. If you still have issues after that change, please repost with all programs included. The easy way to post programs to the forum is to click on the program name, then right click and pick Copy to Clipboard, then in a forum post click the "<>" in the toolbar which will bring up a popup window, then click in that window and type Ctrl-V. Also if all the programs are conveniently grouped in a folder you can right click the folder and pick Copy Folder to Clipboard and post all with just one paste.

More details needed. What kind of sensor? What are we actually controlling with the relay?

As pointed out update your firmware to v4.9.0 (there is also a 5.x branch, however don't dive in until you've done some reading, there are several caveats) I'm confused about your expired certificate, because it's not a self signed certificate, so I can't help there. I can tell you that in 2021 there is a better way to access your ISY remotely. Close your ports, remove the port forwarding entirely and use the ISY portal. Secure access via a cloud portal. Yes it's an additional charge but less the $1.00/month. In addition to secure remote access, you get Alexa / Google home integration and free access to cloud nodeservers.

If 1st floor off button is switched off (use the 'control' dropdown not status) then disable program Evening Lights On wait 30 Minutes enable program Evening Lights On else (nothing) that should do it, adjust the wait to fit, i picked 30 minutes because you said 30 minutes.

I suspect you need to update the ISY firmware. Click Help > About when logged into the admin console locallly and tell use the firmware and UI version numbers.

Polisy hardware is production (i.e. not alpha or beta), and currently runs polyglot 2, which is soon to upgrade to polyglot 3. Many of us have the Alpha version of "ISY on Polisy" also running, that software is alpha test.

Your existing serial PLM can be used with ISY on Polisy, all you need is the serial cable that was originally shipped in the box. ISY on Polisy is also supporting the USB PLM that is currently in stock at Smarthome. ISY on Polisy will also support Z-wave, but UDI has yet to announce which Z-wave board is needed... likely it will be USB. Keep in mind the ISY on Polisy project is currently in ALPHA testing, it's not ready to run your mature system quite yet.

The quickest way to do what you're talking about an "all off scene", is to make a standard scene including all the devices as responders.... sending the scene an ON would turn it on, sending the scene and OFF turns it off. Once that's done, add your KPL button that you want to use as All Off as a controller. then change the Buttons Toggle Mode for that button to "Non-toggle [off]". The button will always send OFF and never send ON, so the scene works as "All Off". There is no need to set each device to the off position in the scene.

I hadn't tried http and 8080 yet, but I just did and it worked for me.

the steps outlined in the linked post state: you typed [admin@polisy ~]$ sudo pkg upgrade isy

Portal for ISY on Polisy is also currently disabled. (I can't post a link to the post that says that because I learned that in a ticket reply from Michel.)

Use "find/repalce" on the program tree to find each usage of a device in a program. Click "My programs" (or whatever your top level folder is if you renamed it) then right click the same and choose "Find/Replace"

my launcher entry is https://<ip.addr.of.polisy>:8443/desc

I'm actually on 13.0, but I'm not certain the prerequisite to load ISY on Polisy. Hopefully @Michel Kohanim will clarify soon.

mines not far off.. a few minutes... but I love the concept of it being calculated for the exact location.. after all, if we are here to begin with we're geeks... Another reason is because I have to use the hue bridge timer to start an animation every morning, after that point the ISY takes over management, the ISY994 and the hue bridge currently are only about 2 seconds apart in the calculated times. The author of app running on the hue bridge has told me point blank that not using the hue bridge and his app as the center of automation is the wrong approach... guess what, I don't agree.. hue is a very small part of my total automation package.

Either will work. for the 2413s you need the original cable that came in the box. 2413u is showing in stock on SH, I just rechecked. (a number of people have ordered this week tho, including me).

Small releases are awesome! (much better than waiting months between) Sunrise/Sunset are much closer... I hope that adding Custom Location back is on the list!

LOL.. SH is going to wonder about the sudden influx of 2413u orders this week.

If your OS isn't yet updated that's likely the problem, include the results of uname -a in order for @Michel Kohanim to give the best answer. Also Michel, you should probably edit a prerequisite into your posts showing how to load ISY on Polisy.

1) not yet... it's still alpha, manual shell commands are being used today, when it's ready for prime time the menu commands will likely work. 2) ISY on Polisy is capable of either the 2413s or the 2413u. to use the 2413s with ISY on Polisy you need the serial cable that arrived in the 2413s box originally (hopefully you kept it). 3) z-wave will be available soon, they haven't finalized the choice yet tho. We can only assume it will be USB.

That makes sense for time, but where in the world are the sunrise and sunset times from? they are a weird hour and a half or so wrong, yet they should be very close for the ??detected?? city. I'm not sure how it got City, because this is what's set in Polisy, which is a different City and state than the one I blanked out, and sunrise/sunset isn't correct for chicago either.

Just re-add the info for it, copy write it down from 'finder' on your computer that it works, then press the add button in finder on the computer it's not working on.