4.6.2 Authenticate ISY keeps popping up and sometimes program closes.  Haven't done any changes in months.  Tried clearing Java cache, still has same issue

 

I also note that status for all sensors is blank.....

 

Thanks,

John

Update...It has to do with the load on this computer, other computers are running ISY correctly.  How do I reload?

Regards,

John

John

If clearing java cache doesn't help, I would

• Uninstall / reinstall java on the computer
• Download and run the new ISY Launcher
• After running the ISY Launcher for the first time, use the blue UD icon to select and run the Admin Console from here on out

Paul

Thanks Paul, I loaded the new ISY launcher already.  I just unloaded and reloaded Java.  Still same results.  Weird.

Thanks,

John

Thanks Paul, I loaded the new ISY launcher already.  I just unloaded and reloaded Java.  Still same results.  Weird.
Thanks,
John

Make sure you check all the boxes when you clear your java cache so that any applets get deleted also

Sent from my SM-G930W8 using Tapatalk

Hello JSchumann,

Very much related to firewall software:

https://wiki.universal-devices.com/index.php?title=Main_Page#Admin_Console_Closes_Automatically

With kind regards,
Michel

 

12 minutes ago, Michel Kohanim said:

Hello JSchumann,

Very much related to firewall software:

https://wiki.universal-devices.com/index.php?title=Main_Page#Admin_Console_Closes_Automatically

With kind regards,
Michel

 

Michel : "............

Enter the IP address:Port of your ISY but, instead, prefix with https. For instance, if your ISY's IP address is 192.168.0.26 and HTTPS Port for your ISY is 8226 (Admin Console | Configuration | Network), then enter https://192.168.0.26:8226

..............."     I have tried this but get message that ISY Finder can not find it.  (Of course I have used my own url)

Edited July 23, 20187 yr by asbril

@asbril,

What port did you use?

With kind regards,

Michel

22 minutes ago, Michel Kohanim said:

What port did you use?

8070..... I get it. Now I used 443 and it works. THANKS

Edited July 23, 20187 yr by asbril

7 hours ago, Michel Kohanim said:

Hello JSchumann,

Very much related to firewall software:

https://wiki.universal-devices.com/index.php?title=Main_Page#Admin_Console_Closes_Automatically

With kind regards,
Michel

 

Hi Michel, just the Microsoft firewall.  

JShcumann,

Have you tried https?

With kind regards,
Michel

OK, I found the culprit, Malwarebytes.  Now I just need to figure out what setting needs to be adjusted.  Here is the section on Java.

Regards,

John

Hi John,

Boy, I have no clue what any of those things are. I would start with the first two.

With kind regards,
Michel

49 minutes ago, Michel Kohanim said:

Hi John,

Boy, I have no clue what any of those things are. I would start with the first two.

With kind regards,
Michel

Will do.  I have a question in to Malwarebytes too.  This happened after their last update.  

Best Regards,

John

Malwarebytes updated their program to fix this issue and the issue where Current State does not display.  Load version 3.5.1.2522 to get the 'fix'

Regards,

John