boser Posted May 24, 2009 Share Posted May 24, 2009 I have a KeypadLinc 2486D v.29 with 6 buttons. It controls the attached light correctly, but when I press any of buttons A/B/C the button light blinks and then stays off. The ISY event reviewer records an event DOF. For button D I don't have this problem (it toggles on/off and events are reported by the ISY as expected). Button A is in a group with an Insteon Light switch (which it does not control, but the ISY controls the light without problem). Buttons B/C/D are not in groups, but the status of button B is used in a program (which it does not control correctly). Is the unit bad? How can I diagnose the problem? Bernhard Link to comment Share on other sites More sharing options...
MikeB Posted May 24, 2009 Share Posted May 24, 2009 Sounds like those buttons are in "non-toggle mode". Link to comment Share on other sites More sharing options...
boser Posted May 24, 2009 Author Share Posted May 24, 2009 Thank you, this solved the problem! Is there a place where all these "tricks and issues" are summarized? I find lots of examples in the wiki and forum, but have a hard time understanding the concepts. Bernhard Link to comment Share on other sites More sharing options...
MikeB Posted May 24, 2009 Share Posted May 24, 2009 The Quickstart Guide in the Wiki is a good place to start, but to be honest there is so much information and variation that it's almost impossible to put it all in one place. We do have a fantastic community on this forum, so if you get stuck please post and you'll almost certainly find someone able to help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.