kewashi Posted April 7, 2020 Posted April 7, 2020 I only have 2 Insteon switches and both stopped working. I tried to remove and re-add them but keep getting this error: The switches work manually. This all happened after I had to power cycle my ISY hub. All the node servers and ZWave devices came back fine but these two didn't. Any pointers?
kewashi Posted April 7, 2020 Author Posted April 7, 2020 Something really weird is going on. I factory reset both switches several times and got same error. I also reset PLM and it didn't help. Then I unplugged the PLM and even with it unplugged my ISY shows the PLM as connected, which it isn't. I think the PLM might be dead ... but the damn thing is nearly brand new.
Michel Kohanim Posted April 7, 2020 Posted April 7, 2020 @kewashi, The first rule of INSTEON comm error is: move the PLM to a different outlet and one which is not shared with other transformers and power supplies. With kind regards, Michel
kewashi Posted April 7, 2020 Author Posted April 7, 2020 Okay - I reset PLM a second time and then re-added them and now it is working.
kewashi Posted April 7, 2020 Author Posted April 7, 2020 3 minutes ago, Michel Kohanim said: move the PLM to a different outlet and one which is not shared with other transformers and power supplies. Yea - this all started when I added a monitor to the same outlet... I now moved it and reset the PLM and it seems back to normal.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.