RandyT Posted September 23, 2020 Posted September 23, 2020 I recently picked up a Schlage Encode deadbolt. This is the WIFI version of their Schlage Connect Z-Wave model. I've used ISY to control a Z-wave Yale deadbolt in the past and thought the integration with ISY worked pretty well. I am curious if there is any way to integrate this into ISY. I don't see anything on Polyglot side that could help. Debating if I should exchange for Z-wave or integrate it into Ring Alarm and Alexa outside of ISY. Comments and experience welcome.
hart2hart Posted September 23, 2020 Posted September 23, 2020 I’ve been in touch with the Schlage group. They indicated there were no immediate plans to open the Encode API for HA use. At this points, it’s all Commerical and/or paid usage. Couldn’t get beyond that point.
RandyT Posted September 24, 2020 Author Posted September 24, 2020 Thanks for that info @hart2hart Is it helpful for any of us interested in that access to also contact them?
lilyoyo1 Posted September 24, 2020 Posted September 24, 2020 31 minutes ago, RandyT said: Thanks for that info @hart2hart Is it helpful for any of us interested in that access to also contact them? It doesn't hurt though I don't think it would change anything in the near future. They know and understand automation which is why they have devices for it). However, someone chose to make this closed off for now.
hart2hart Posted September 24, 2020 Posted September 24, 2020 Thanks for that info @hart2hart Is it helpful for any of us interested in that access to also contact them? Yes, I think additional interest will help make longer term case. Also, Schlage has outsourced the cloud portion to a firm called Yonomi so contact them too.
lilyoyo1 Posted September 24, 2020 Posted September 24, 2020 1 hour ago, hart2hart said: Yes, I think additional interest will help make longer term case. Also, Schlage has outsourced the cloud portion to a firm called Yonomi so contact them too. Is there an API for Yonomi? If so, maybe there can be a way via a nodeserver talking through them.
RandyT Posted September 24, 2020 Author Posted September 24, 2020 Found this bit of code in the Yonomi github. Not sure if that is helpful for polyglot. https://github.com/Yonomi/thincloud-node-sdk
RandyT Posted September 24, 2020 Author Posted September 24, 2020 Also ran across this post which is pretty informative. https://theresnomon.co/the-current-state-of-api-access-to-your-schlage-encode-locks-7e981f404501
lilyoyo1 Posted September 24, 2020 Posted September 24, 2020 2 hours ago, RandyT said: Also ran across this post which is pretty informative. https://theresnomon.co/the-current-state-of-api-access-to-your-schlage-encode-locks-7e981f404501 Nice article. Makes things look pretty locked down (which is good in a sense).
Recommended Posts