I have initiated the upgrade packages, AC shuts down, Polisy left light remains on, Isy still controlling everything.

Pulled power after about 15 min, Polisy boots up, one beep, left light on and all devices controllable yet still on 5.4.5.

Thoughts on how to upgrade?

I experienced a similar situation trying to update the Polisy. 

Take a look at this solution posted by @Michel Kohanim to help. Step #2 helped resolve my issue.

 

19 minutes ago, pjjameso said:

I have initiated the upgrade packages, AC shuts down, Polisy left light remains on, Isy still controlling everything.

Pulled power after about 15 min, Polisy boots up, one beep, left light on and all devices controllable yet still on 5.4.5.

Thoughts on how to upgrade?

The "pkg" updater that should have been included to update at the beginning of the script was forgotten. I guess they haven't fixed the script yet.

Run the updater and update pkg first then try your updater click option in admin console again

 

Edited December 24, 20222 yr by larryllix

7 minutes ago, larryllix said:

Run the updater and update pkg first

Thank you….of course I’m a neophyte and don’t know how to execute sudo or where to find the update package…

11 minutes ago, pjjameso said:

Thank you….of course I’m a neophyte and don’t know how to execute sudo or where to find the update package…

Do you know how to use SSH on a PC to connect with your polisy? Do you know your polisy's IP and port address?

Havent done it with ISY/Polisy but have used Putty previously.  I have both the ip and port for the Polisy.  When i open Putty and start session with 192.168.4.6 and 8080 i just have a green mark without any other characters....followed by 'remote side unexpectedly closed network connection'

Next step?

 

Edited December 24, 20222 yr by pjjameso

dont use 8080 for SSH   use the default (think its 23)

dont use 8080 for SSH   use the default (think its 23)

SSH is port 22, 23 is Telnet

Sent from my Pixel 6 Pro using Tapatalk

Im in!.... Directions to follow?

 

Run "sudo pkg install -r udi pkg" then upgrade as per usual.

Sent from my Pixel 6 Pro using Tapatalk

Success! Thank to everyone and Merry Christmas.