kohai Posted October 11, 2019 Posted October 11, 2019 (edited) Awesome. Now, you go for first. That Inovelli fix actually is something I think I ran into. Good deal. Update: I've upgraded from 5.0.15. Console was sluggish and I needed to add the java parameter noted above in the notes to increase console speed. I don't see my Inovelli NZW37 updating the isy when the physical button is pressed. I'm going to dig more to see if I need to enable something for that to happen. (Note, my isy is only z-wave -- no plm.) Edited October 12, 2019 by kohai
simplextech Posted October 11, 2019 Posted October 11, 2019 Upgrade notes: Lost 2 dimmers and 2 switches. They were just gone after the upgrade. I added them back with links still intact and things seem to be working fine. Just found it odd that they just vanished after the upgrade. Z-Wave devices were all still present and accounted for. I'm going to run a Z-Wave Heal and I'm hoping battery devices are now excluded from the Heal...hoping.
kevinkaz Posted October 11, 2019 Posted October 11, 2019 (edited) Can Not include zwave device Edited October 11, 2019 by kevinkaz POWER CYCLE CORRECTED THIS ISSUE opened a support ticket
rahnee Posted October 11, 2019 Posted October 11, 2019 (edited) Cannot get into "Options" for Schlage 469 locks. Get the following message... Edited October 11, 2019 by rahnee
jckinneman Posted October 11, 2019 Posted October 11, 2019 When will upgrades appear as an option on the Help as they used to instead of doing manual upgrades?
larryllix Posted October 11, 2019 Posted October 11, 2019 What? No v5.1.x ? I was waiting for v5.0.16 (gamma). Can we announce this on other forums? Does this mean UDI received Zwave plus certification? Sent using Tapatalk
lilyoyo1 Posted October 11, 2019 Posted October 11, 2019 19 minutes ago, jckinneman said: When will upgrades appear as an option on the Help as they used to instead of doing manual upgrades? Only official updates appear there. Betas and RCs do not
paulbates Posted October 11, 2019 Posted October 11, 2019 42 minutes ago, jckinneman said: When will upgrades appear as an option on the Help as they used to instead of doing manual upgrades? 22 minutes ago, lilyoyo1 said: Only official updates appear there. Betas and RCs do not Its worth noting that 5.0.16 was announced as a release candidate, which means this is likely what will show up in the AC as Release. I got an email from UDI stating that: One step closer … It's about time you give 5.0.16 a try as it builds on top of the already stable 5.0.15 release, includes final touches, and - barring any major bugs - it'll become an official release.
larryllix Posted October 11, 2019 Posted October 11, 2019 So "RC" means "release candidate" and not "Request for Comments". One small step for ISY. One giant leap for UDI !. ……...Walt Disney?
gviliunas Posted October 12, 2019 Posted October 12, 2019 Yes, another giant leap for UDI. Upgraded from 5.0.15A - No problems experienced. My windows sensors all appeared with new "Barrier" nodes. It is nice using open/close as states instead of on/off. Everything in my system continues to work well. Thanks for all the hard work in getting to RC1. 1 1
d00gster Posted October 12, 2019 Posted October 12, 2019 upgrading from .15A to .16 and getting the following error. "Upgrade Failed: Failed uploading file (reported written size is invalid) 6.6m is the file size I am getting from the download link
asbril Posted October 12, 2019 Posted October 12, 2019 Upgraded to 5.0.16 (rc1) using my Mac and encountered no issue. ?
paulbates Posted October 12, 2019 Posted October 12, 2019 9 hours ago, gviliunas said: Yes, another giant leap for UDI. Upgraded from 5.0.15A - No problems experienced. My windows sensors all appeared with new "Barrier" nodes. It is nice using open/close as states instead of on/off. Everything in my system continues to work well. Thanks for all the hard work in getting to RC1. ? That needed to be said again. Upgraded from 5.015 (No bloody A, B.. or C). The upgrade seemed to go pretty fast. All programs expected to be running were running. Thanks Michel, Chris, Orly, Steve (et. al.) for keeping the priority / focus on quality. Paul 4
dbuss Posted October 12, 2019 Posted October 12, 2019 The upgrade went smoothly with no apparent problems. My color blind eyes really appreciate the font color change. Thank you!!
blueman2 Posted October 13, 2019 Posted October 13, 2019 On 10/11/2019 at 6:00 AM, Chris Jahn said: - New - Options have been added to Z-Wave nodes that allow you to control when the device is automatically queried and what Z-Wave messages are sent by the device when a button is pressed (or a sensor is triggered). @Chris Jahn, can you expand on this? I am not sure what this means.
asbril Posted October 13, 2019 Posted October 13, 2019 (edited) 7 hours ago, blueman2 said: @Chris Jahn, can you expand on this? I am not sure what this means. Indeed an interesting question. Is this for older Zwave devices that don't come with standard status update? Currently I have a program that queries my older Zwave devices at a set interval. If I use this new setting, can that program be removed? Edited October 13, 2019 by asbril
TexMike Posted October 13, 2019 Posted October 13, 2019 10 hours ago, blueman2 said: @Chris Jahn, can you expand on this? I am not sure what this means. Also interested in more details on this. Can it be used to get more reliable battery level reporting?
macjeff Posted October 13, 2019 Posted October 13, 2019 A bug returned that I have not seen in a while since upgrading to 5.1.6 yesterday. It may have been in earlier beta of 5.0 or even in 4.0. Hard to remember since I run every version!!! I flip a switch and EVERY light in the house turns on, all ceiling fans, all on/off devices. Anyways, Michel at UDI helped me narrow it down due to other reports in the past. It was some bug with motion sensors triggering at the exact same time a switch was pushed. Last night when it happened we let our dogs out the front door. Yes we have a motion sensor there to turn on front porch lights so it was triggered. A second earlier I said, Alexa turn on backyard lights and there is a delay so there is a chance that alexa turned on that light at the exact time of that motion sensor trigger. Logs dont show much. They dont show all the other lights turning on. Just the ones that were supposed to turn on. This may or may not make a difference but I have keypadlincs where the buttons are just status. So I can glance and see that garage doors or open or basement lights are on by a light on a keypadlinc. Well NONE of those were on yet the lights were on. I just think the scene (or program in some cases) were not activated. This is a VERY hard one to test because it happens randomly but been at least a year or more since it happened. Jeff
roopesh Posted October 13, 2019 Posted October 13, 2019 On 10/11/2019 at 9:03 PM, d00gster said: upgrading from .15A to .16 and getting the following error. "Upgrade Failed: Failed uploading file (reported written size is invalid) 6.6m is the file size I am getting from the download link I'm getting the same error. Upgrading using the ZW (OADR) file. Maybe I'm unsure which file to use. I have an ISY994i ZW/IR PRO. Which file should I be using?
blueman2 Posted October 13, 2019 Posted October 13, 2019 2 minutes ago, roopesh said: I'm getting the same error. Upgrading using the ZW (OADR) file. Maybe I'm unsure which file to use. I have an ISY994i ZW/IR PRO. Which file should I be using? If you have a PLM, use ISY 994i Series including Z-Wave support
roopesh Posted October 13, 2019 Posted October 13, 2019 (edited) 1 hour ago, blueman2 said: If you have a PLM, use ISY 994i Series including Z-Wave support Hmmmm... same issue. Upgrading from 5.0.15A. Edit: Worked when I went local instead of through my.isy.io URL. Edited October 13, 2019 by roopesh Fixed!
Richraine Posted October 13, 2019 Posted October 13, 2019 Please help with upgrade to 5016. I upgraded as directed. Everything went well. I began to check admin console, everything good. Then changed my password from admin. When I signed off and signed back in the console would not respond to the new password... how can I either go back to 4.xx.xx or resent the password. Thanks in advance 1
paulbates Posted October 13, 2019 Posted October 13, 2019 39 minutes ago, Richraine said: Please help with upgrade to 5016. I upgraded as directed. Everything went well. I began to check admin console, everything good. Then changed my password from admin. When I signed off and signed back in the console would not respond to the new password... how can I either go back to 4.xx.xx or resent the password. Thanks in advance Did you try admin / admin as the password again? Maybe it didn't save for some reason. Paul 1
Recommended Posts