Michaelv Posted May 19, 2023 Posted May 19, 2023 I have an ISY 994i/IR Pro that I have been running since it came out. I bought a Polisy Pro but could never use it as I could find a PLM. So, I bought a Eisay and a new PLM, but before installing it, I wondered if it will communicate with Homeseer via the insteon plugin that has been working my ISY. Has anyone come across this situation? Can Eisay work with homeseer?
Michel Kohanim Posted May 19, 2023 Posted May 19, 2023 @Michaelv, Whatever worked with 994 for INSTEON should work with HS. With kind regards, Michel
bpwwer Posted May 19, 2023 Posted May 19, 2023 @Michaelv Yes, the latest ISY plugin for HomeSeer does work with the latest eisy and Polisy firmware. 2
Michaelv Posted June 11, 2023 Author Posted June 11, 2023 I had some time try try to get this to work. Homeseer knows the IP address of the Eisy but under the status Page there is nothing listed. I deleted the plugin and then reinstalled but i get the same result. Anything I could try? I have a lot if interaction between these two platforms.
bpwwer Posted June 11, 2023 Posted June 11, 2023 1 hour ago, Michaelv said: I had some time try try to get this to work. Homeseer knows the IP address of the Eisy but under the status Page there is nothing listed. I deleted the plugin and then reinstalled but i get the same result. Anything I could try? I have a lot if interaction between these two platforms. As far as I know, it should work with the eisy, but it's possible that a recent firmware update breaks the plug-in. Does the plug-in log anything that might indicate what the problem is?
mitchmitchell Posted June 12, 2023 Posted June 12, 2023 I'm seeing the same issue within the last few days, the last eisy device update date in HS is 6/10/2023 10:21:44 PM an the log is full of the following message:
bpwwer Posted June 12, 2023 Posted June 12, 2023 Are you sure the plug-in is configured properly? From the log, the plug-in is not able to connect to the eisy at all.
DennisC Posted June 12, 2023 Posted June 12, 2023 Have you changed the eisy login credentials? It looks like the plug-in is using admin.
Michaelv Posted June 12, 2023 Author Posted June 12, 2023 I di not change the credentials they are the default ones.
mitchmitchell Posted June 12, 2023 Posted June 12, 2023 Something happened to mine, I reentered the credentials and it started working, no idea why that worked.
bpwwer Posted June 12, 2023 Posted June 12, 2023 2 hours ago, Michaelv said: I di not change the credentials they are the default ones. What have you set the IP address/port too? What shows up in the log when you start the plug-in?
Michaelv Posted June 13, 2023 Author Posted June 13, 2023 I restarted Homeseer, then disabled, then enabled the plugin and this is what came back in the log: (attached) MV LOG 6-13-23.txt
bpwwer Posted June 13, 2023 Posted June 13, 2023 @Michaelv Looks like the same issue as @mitchmitchell, the plug-in is not able to see or connect to the eisy. Make sure you have the correct ipaddress / port information and the correct username/password.
Solution nccasinc Posted June 24, 2023 Solution Posted June 24, 2023 Mine has worked fine for several months. Be sure your EISY iP address is xx,xx,xx,xx:8080. You have to specify the port number :8080 for the EISY. Hope this works for you. Had the same issue as you at first!!!! 1
Recommended Posts