dougos2 Posted June 22, 2023 Posted June 22, 2023 I added the Leviton Smart Plug to my ISY. Everything works perfectly except when I manually activate the smart plug, its status is not reflected in the ISY without querying the smart plug. The event log shows it is sending communications to the ISY when I manually activate the switch, but no change in ISY status.
Geddy Posted June 22, 2023 Posted June 22, 2023 @dougos2 Could you add some additional system details to try to help? What's your ISY994 Firmware? What is your UI for Admin Console (Help -> About) What series Z-Wave do you have? (Use this post to help determine your series controller) Do you have any other Z-Wave devices that report status correctly? I'm not familiar with the smart plug, but it's possible it is a newer 500 or 700 series device that isn't correctly sending information to the ISY994 z-wave module you have. Perhaps others with more z-wave experience can chime in, but additional information on your setup could be helpful.
lilyoyo1 Posted June 22, 2023 Posted June 22, 2023 With you using the ISY, I believe that you must be on the latest firmware and have to query your devices since leviton uses hail vs sending status automatically like other modern zwave devices do. 1
Geddy Posted June 22, 2023 Posted June 22, 2023 @dougos2 Looks like might be a "known" issue with this brand/manufacturer. Here are a couple of old posts to review: PS: Since these posts are archived the only way to find them is with Google Site Search. These don't show up when searching via the forums search tool.
Recommended Posts