bmercier Posted October 10, 2023 Posted October 10, 2023 Hello everyone, This is the support thread for PG3x v3.2.9.
hart2hart Posted October 10, 2023 Posted October 10, 2023 (edited) @bmercierJust upgraded and PG3x looks good so far. However, IoX now has the following popup error at each time launched and I tried it 5 times. Rebooted a second time and still occurs. Edited October 10, 2023 by hart2hart
bmercier Posted October 10, 2023 Author Posted October 10, 2023 1 hour ago, hart2hart said: @bmercierJust upgraded and PG3x looks good so far. However, IoX now has the following popup error at each time launched and I tried it 5 times. Rebooted a second time and still occurs. Hello, Please open a ticket, reference this post, and also attach the result of https://eisy.local:8443/WEB/sysconfig.txt. Thanks, Benoit
kzboray Posted October 10, 2023 Posted October 10, 2023 Updated from PG3x 3.2.8 to 3.2.9 on a Polisy Pro. All Programs where marked as disabled and had to be manually re-enabled. No other issues noted at this time.
Michel Kohanim Posted October 10, 2023 Posted October 10, 2023 @hart2hart, the SSDP Client issue is on the client side of UPnP discovery (Admin Console). If you are on Linux of FreeBSD, it's normal. If you are on Windows, then something else is using that port. In short, it has nothing to do with eisy. @kzboray, so very sorry for the trouble. This is fixed in our next release (today). This said, simply restarting IoX from the Admin Console will fix this issue so that you don't have to re-enable all programs manually. With kind regards, Michel 2
mmb Posted October 10, 2023 Posted October 10, 2023 5 hours ago, hart2hart said: @bmercierJust upgraded and PG3x looks good so far. However, IoX now has the following popup error at each time launched and I tried it 5 times. Rebooted a second time and still occurs. @hart2hart I've seen this error message several times before and I reported. Got the same response from UD. It disappears after a period of time in my case so I just ignore it. 1
Phil G Posted October 10, 2023 Posted October 10, 2023 (edited) 4 hours ago, Michel Kohanim said: This said, simply restarting IoX from the Admin Console will fix this issue so that you don't have to re-enable all programs manually. @Michel Kohanim, restarting didn't fix the problem for me after updating to 3.2.9. My Eisy is on 5.7.0 / 3.2.9 now, and I've had to manually re-enable all programs for the past 3 or 4 updates. Edited October 10, 2023 by Hoosier Daddy clarify
Michel Kohanim Posted October 10, 2023 Posted October 10, 2023 @Hoosier Daddy, Apologies, 3.2.9 had nothing to do with disabled programs. 5.7.0_4 was released just a few minutes ago. It should fix the disabled program issue and, if not, it would provide us enough debugging info to figure out why it was not fixed. With kind regards, Michel 1 1
hart2hart Posted October 10, 2023 Posted October 10, 2023 @hart2hart, the SSDP Client issue is on the client side of UPnP discovery (Admin Console). If you are on Linux of FreeBSD, it's normal. If you are on Windows, then something else is using that port. In short, it has nothing to do with eisy. With kind regards, MichelThanks. As I should have done to start, I rebooted the PC and the issue resolved.
GTench Posted October 11, 2023 Posted October 11, 2023 Just did the upgrade. The disabled programs issue has been fixed at least for me. Thanks!
Recommended Posts