Kasa Devices to support

[Jimbo.Automates]

I also recently purchased the Kasa NS; however, I see this message:
http://d2z8ydsemzif1x.cloudfront.net/monthly_2024_12/image.thumb.png.73bb11d58c3455ce773e0d2a7c5a8eb6.png

@bmercier can you check into this and the beta issue as well?

Sent from my Pixel 8 Pro using Tapatalk

[Jimbo.Automates]

Those of you trying to install the beta (non-production) version, are you selecting 3.2.2 - Free - Trial?  I just tried on my system and it worked as expected.

[mjrush]

I was trying 3.2.2 but my view is different. I have Activate, not Install.

 

My PG3x is 3.2.27.  My installed version is 3.1.4.

[Jimbo.Automates]

I was trying 3.2.2 but my view is different. I have Activate, not Install.
http://d2z8ydsemzif1x.cloudfront.net/monthly_2024_12/image.thumb.png.2841038235b8b47ffe6b54a07fcd6683.png
 
My PG3x is 3.2.27.  My installed version is 3.1.4.

And if you activate what happens? It should just authorize thru the portal and let you install?

Sent from my Pixel 8 Pro using Tapatalk

[mjrush]

When I activate, I get this. The version shows 3.2.1 but I activated 3.2.2.

Edited December 21, 2024 by mjrush

[mjrush]

I get this before the PayPal window.  The version is 3.2.2 here.

[Jimbo.Automates]

Thanks, I submitted a support ticket

Sent from my Pixel 8 Pro using Tapatalk

[Jimbo.Automates]

I just updated the beta Standard to 3.2.2, @bmercier said if you own the production standard you can install the beta standard.  Let me know.

[mjrush]

I installed 3.2.2 in a new slot.  Seems to be stuck in a loop with this error:

2024-12-22 16:31:31.319 MainThread udi_interface ERROR udi_interface:write: No module named 'mashumaro'

I created a debug log file (maybe) should I attach it here or send another way?

[Jimbo.Automates]

24 minutes ago, mjrush said:

I installed 3.2.2 in a new slot.  Seems to be stuck in a loop with this error:

2024-12-22 16:31:31.319 MainThread udi_interface ERROR udi_interface:write: No module named 'mashumaro'

I created a debug log file (maybe) should I attach it here or send another way?

Must have been an install error, please "Download Log Package" and PM it to me.

[Jimbo.Automates]

@mjrush Thanks for the log package, it showed there was an install error.  Please try 3.2.3.

 

[mjrush]

Now it seams to be looking for:

2024-12-22 21:15:15.640 MainThread udi_interface ERROR udi_interface:write: No module named 'async_timeout'

I will send a log package.

[Jimbo.Automates]

18 hours ago, mjrush said:

Now it seams to be looking for:

2024-12-22 21:15:15.640 MainThread udi_interface ERROR udi_interface:write: No module named 'async_timeout'

I will send a log package.

Please try 3.2.4

[mjrush]

3.2.4 works. I can control the KP125M now.  The power nodes populate but the voltage and current are 0.  I don't see these in the Kasa app so I assume it doesn't report them.

Thank you.

[Jimbo.Automates]

6 minutes ago, mjrush said:

3.2.4 works. I can control the KP125M now.  The power nodes populate but the voltage and current are 0.  I don't see these in the Kasa app so I assume it doesn't report them.

Thank you.

Awesome!  Glad its finally working.  The new library has the ability to query features supported by the device so I need to do some rework on how I create the node so it properly shows the features it supports, like voltage and current.

 

[Ross]

I'm jumping back into this thread after a couple of months.  I'm still disconnected.

I have bought the Production store Kasa (Standard - Perpetual) twice (and have been charged $30 twice) and yet I am still receiving the following message: "The subscription for this node server has expired."  So, I'm a bit gun shy to install it yet again (and get charged again).

When I go into the Production store, I only see 3.1.4 available.  I don't see 3.2.4.  I see the same thing in the non-production store.

I am running an ISY (v 5.3.4) and using a Polisy (v 3.1.13) for the plug-ins.  

Thank you as always,

Ross

 

 

[Jimbo.Automates]

I'm jumping back into this thread after a couple of months.  I'm still disconnected.
I have bought the Production store Kasa (Standard - Perpetual) twice (and have been charged $30 twice) and yet I am still receiving the following message: "The subscription for this node server has expired."  So, I'm a bit gun shy to install it yet again (and get charged again).

When I go into the Production store, I only see 3.1.4 available.  I don't see 3.2.4.  I see the same thing in the non-production store.
http://d2z8ydsemzif1x.cloudfront.net/monthly_2025_02/image.png.837547ef3ed4e972fad124a9c105c5ba.png
I am running an ISY (v 5.3.4) and using a Polisy (v 3.1.13) for the plug-ins.  
Thank you as always,
Ross
 
 

Please open a support ticket and send this in along with the uuid of your polisy

Sent from my Pixel 8 Pro using Tapatalk

[Ross]

@Jimbo.Automates

I believe I now have the correct version - 3.2.4 [beta].  Thank you to @bmercier.

However, it is still disconnected.  I notice the last line of the log says:  No module named 'mashumaro'

I'm attaching the log and the log package as I saw that @mjrush had the same issue and you asked him to do the same: 

Thank you in advance for any and all assistance,

Ross

Kasa_2-18-2025_72144-PM.zip Kasa_2-18-2025_72145-PM.zip

Edited March 20 by Ross

[Ross]

@Jimbo.Automates

Well, I've paid $60 for this plugin (it charged me $30 twice) and it still doesn't work.  

Please let me know if this is fixable or not.

Thanks,

Ross

Edited March 20 by Ross

[jkraus]

Yep, gave up on Kasa, too buggy and @Jimbo.Automates does not respond, so went Yolink.  More expensive but seems to work OK.

[Jimbo.Automates]

@Ross

I can't control subscriptions, you'll need to submit a support ticket.

For the error: No module named 'mashumaro'

This means the install failed, please reinstall in the same slot then "Download Log Package" which will show the install error, and PM that to me.  You likely have a problem that support will need to look into.

Sorry for not responding previously, I try to monitor the forum but don't always get notifications.  The beta fixes many issues and I'll try to release soon.  Just remember, this is a side job for most developers so real work and life do take priority.

 

[Ross]

@Jimbo.Automates Thank you.  I only see version 3.1.4 available.  And I've read there's a 3.2.2 version around.  I probably need to update my Polisy (I run the ISY and have my plug-ins on Polisy).  I'll look into this in about 3 weeks as I am traveling off/on for a bit.  Hopefully this forum remains open until then!

And, I do appreciate that this is a side job for you and also appreciate what all plugin developers do for us users.

Thanks again,

Ross