Got an alert email. Any thoughts ?

Leak Detector Problem Encountered  Munchkin Room Status: 9 2025/05/20,  9:00:01 AM  ---Status Key--- 1 = Heartbeat OK (normal status) 2 = Heartbeat missed 3 = Heartbeat check program not running 9 = Leak detected

So what's the status key value, and where do you go to see it? A variable?

I have a similar program, though it sends distinct messages for each possible occurrence. I do get the odd missed heartbeat, once every few months.

@Mwid just FYI split your post out of the old thread as it's a new issue. 

Seems that you have a program running that is connected to a leak detector. You can perform a "Find/Replace" on the program tab and search for "Raw text" and maybe search for "munchkin" to find the program that generated this alert. (Link is to the wiki for "Find/Replace")

You can also look at Customizations (in the "Configuration" tab under "Emails/Notifications". That's where the text of the alert will be stored.

Leak detectors have had a lot of discussion through the years and sometimes have very complicated and involved programs associated with them. Be sure you run a backup before you make changes and after every (few) change(s) you make in case you need to revert to an earlier point.