Added a second Hub (X3 Smart Home Gateway)

[pkauf]

I started out with just a speaker hub, but got an additional hub that has battery backup so I can get alerts if power drops - when I added it to the app, etc. its there and working fine.  How do I get the plugin to recognize it?

 

Thanks

[Panda88]

The plugin ignores the HUBs (besides speaker hub) as they cannot do anything besides being a connection to the cloud

[pkauf]

Well, this hub has alerts for power loss which I was hoping to monitor via the plug in …

[Panda88]

if you can send a log with power and without power i can tage a look.   they do have a dedicated device for this.   

i do have the pro hub (probably similar to X3 hub) and it may have the same reporting - I'll take a look when I get some time

[pkauf]

Cool, I'll kill the power and grab the log.  Kinda new to Yolink - where can I get that log-in the app somewhere?

 

[paulbates]

37 minutes ago, pkauf said:

Cool, I'll kill the power and grab the log.  Kinda new to Yolink - where can I get that log-in the app somewhere?

 

The pg3x log specifically under the yolink plugin. Set it do debug level

[pkauf]

@paulbates - are you sure this is what he wants?  @Panda88  indicated he ignores the hubs that are not the speaker hub, so why would there be an messages generated from the plugin?   I assumed he was looking for messages coming out from the hub itself.  Just want to make sure I grab what is needed.  Thanks!

[Panda88]

You need to restart the node after enabling the debug level

Devices still send data - I just do not process it (as I do not know what to do with it

Should be able to see what is reported and then make the needed changes

[pkauf]

30 minutes ago, Panda88 said:

You need to restart the node after enabling the debug level

Devices still send data - I just do not process it (as I do not know what to do with it

Should be able to see what is reported and then make the needed changes

Cool, thanks for confirming, just didn't want to send the wrong info.  @paulbates - thanks, sorry, should have trusted you! 😀

[pkauf]

I don't see any messages in the logs from the X3 Hub, only the speaker hub, but I may be misreading it.  Let me know if this helps.  It does show up in the device log, but maybe it isn't putting it out via the api . . .

YoLink_8-19-2025_32932_PM.zip

[pkauf]

And, if for some reason this isn't working, I could always get the following - do you support it?

 

https://www.amazon.com/YoLink-Long-Range-Wireless-Monitoring-Required/dp/B09NR1YXHH/ref=sr_1_1?crid=21V2VVEZE3Z9U&dib=eyJ2IjoiMSJ9.s-GdXmoujhVVpoLTqRIotFp8xtys6Kqx2J7VRf9aOySyZ6KGPIljLywfZnclIjogcwmuFFyBfFlEYAopg1U5SQvNj9hDXr2En-ZAODv3331EebOiIrD5710yU0ljPgobVKSL8ztpCdkkiWozcpaT8LDSZKron8CNTiVNJRHTX-DaQMum4LBpgDAvUi9UaPeP_L8XYg9o94KrQVr2nE8qkAPrTsEPzCiiCWmvfvG2vmU.3VW2sRzGzzWWhk41UcgCDI3xn7BENfUw5fwQmE7ncjQ&dib_tag=se&keywords=yolink%2Bpower%2Bfailure%2Bsensor&qid=1755635901&sprefix=yolink%2Bpower%2B%2Caps%2C113&sr=8-1&th=1

 

[Panda88]

I have this device and it works

Looks like I do not log the "unknown" X3 hub.   I'll see what I can see from my own system to see if I can deermine if codes are sent (or not sent) 

[pkauf]

1 hour ago, Panda88 said:

I have this device and it works

Looks like I do not log the "unknown" X3 hub.   I'll see what I can see from my own system to see if I can deermine if codes are sent (or not sent) 

Cool, if you can't, let me know and I'll just get the power device.  it's only like 20.00 . . .